Wheel Adapter Drawing

[bill18163]

I posted this info quite a while back and saw there was some conversation on the subject of having room to mount chains on the rear wheels of tractors. I drew this drawing and bought the material and had a friend of mine machine them for me. They worked well for me.
Link

MikePA: Cleaned up long URL. Please review your message before posting it. It's simple not to do this. Just insert a descriptive word or two between the {url=http://whatever}<font color="red">Enter words here</font>{/url} instead of the entire URL. Replace parentheses with brackets in previous example.

 

[realtaildragger]

Bill, That is a fine drawing. I just need to verify the dimensions for my L245DT. Interesting that the 6" diameter bolt circle is actually 150mm. I wonder if the commercially available 6" centers are also really 150mm.

My tractor has 2 studs & 4 lug bolts. Did you have same and did you do anything to keep the 2 studs from turning out?

What material did you use for the adaptors and finally... would your friend consider making & selling another set?

Thanks.

 

[ronjhall]

Mike
The discussion about wheel spacers for the B27-2910 tractor has been going on for awhile. I'm not sure they will fit you tractor. They do fit the B8200 wheels.
Here some of the threads on the spacers.
Picture
B7800 Wheel Spacers
Tire Chains on a B7800
The new B3030 will have a new spacer for these wheels.