Where to add engine oil in Ford 2000?
- Thread starter FordTwoThousand
- Start date
- Views: 20295
-
- Tags
- ford 2000
DJ54
Elite Member
- Joined
- Jan 20, 2009
- Messages
- 4,592
- Location
- Carroll, Ohio
- Tractor
- IH Farmall 656 gas/ IH 240 Utility/ 2, Super C Farmalls/ 2, Farmall A's/ Farmall BN/McCormick-Deering OS-6/McCormick-Deering O-4/ '36 Farmall F-12/ 480 Case hoe. '65 Ford 2000 3 cyl., 4 spd. w/3 spd Aux. Trans
Fill tube is just ahead of the distributor, remove the cap with the wing nut.
OP
FordTwoThousand
New member
Thank you so much!
Would you happen to know what oil should be used in such a tractor?
Would you happen to know what oil should be used in such a tractor?
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
i'd personally put in 15w4 C/S rated oil.
for the trans sump, diffy sump, and hyds sump ( all seperate ), you can use a utf oil meeting M2c134 spec. OR use 80w90 gear oil in the trans and diffy, and UTF in the hyds.
spin on filter will be a fram ph8a, supertech st8a, napa 1452 or 1515, motorcraft fl1a , dual 300 etc.
ignition parts for that machine will be:
Side-Mount Distributor: 8n thru 4 cyl thousand series
gap points to .025
Points:
NAPA #CS749
NAPA HEAVY DUTY PIERCED (ventilated) #CS753
Standard Ignition #FD-8081
Standard Ignition Blue Streak #FD-8081X (Premium)
Condensor:
NAPA #FA66
Standard Ignition #FD-75
Standard Ignition Blue Streak #FD75X (Premium)
Rotor:
NAPA #FA67
Standard Ignition #FD-108
Distributor Cap:
NAPA #FA352
Standard Ignition #FD-128
side mount points hold down screws #8-32 X 3/16
FORD AUTOMOBILE dealer parts counter. come with built-in lockwasher. p/n 355047-S7 (#8-32 X 0.19)
All 4 cyl models can use AL-437 or champion H12 spark plugs instead of OEM Champion H10 or AL 216 plugs.
ps.. time to get a owners manual, and a fo20 service manual
for the trans sump, diffy sump, and hyds sump ( all seperate ), you can use a utf oil meeting M2c134 spec. OR use 80w90 gear oil in the trans and diffy, and UTF in the hyds.
spin on filter will be a fram ph8a, supertech st8a, napa 1452 or 1515, motorcraft fl1a , dual 300 etc.
ignition parts for that machine will be:
Side-Mount Distributor: 8n thru 4 cyl thousand series
gap points to .025
Points:
NAPA #CS749
NAPA HEAVY DUTY PIERCED (ventilated) #CS753
Standard Ignition #FD-8081
Standard Ignition Blue Streak #FD-8081X (Premium)
Condensor:
NAPA #FA66
Standard Ignition #FD-75
Standard Ignition Blue Streak #FD75X (Premium)
Rotor:
NAPA #FA67
Standard Ignition #FD-108
Distributor Cap:
NAPA #FA352
Standard Ignition #FD-128
side mount points hold down screws #8-32 X 3/16
FORD AUTOMOBILE dealer parts counter. come with built-in lockwasher. p/n 355047-S7 (#8-32 X 0.19)
All 4 cyl models can use AL-437 or champion H12 spark plugs instead of OEM Champion H10 or AL 216 plugs.
ps.. time to get a owners manual, and a fo20 service manual
hwinch5
New member
- Joined
- Mar 29, 2012
- Messages
- 18
- Location
- Hamden, CT
- Tractor
- Gravely, Model L, Ford 2000 Industrial backhoe
Hey, I'm curious what year is your Ford 2000? Have you ever replaced the voltage regulator?
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
my ford 2000? it's a 63-64 model with some parts from other 55+ models mixed in
i have an alt on it. so no external vreg.
I changed the system to 12 V and use an alternator instead of a generator and don't use a voltage regulator.
