Where's this Grease Fitting?

   / Where's this Grease Fitting? #31  
Re: Where\'s this Grease Fitting?

OK I wasn't sure what it lubed but I thought perhaps the main pivot shaft. So what is the orange colored rod that looks like it might support your right side fender? Maybe a bungee cord?

Why are you using the lowest hole for the Top link pin?
 
   / Where's this Grease Fitting? #32  
Re: Where\'s this Grease Fitting?

OK I wasn't sure what it lubed but I thought perhaps the main pivot shaft. So what is the orange colored rod that looks like it might support your right side fender? Maybe a bungee cord?

Why are you using the lowest hole for the Top link pin?
 
   / Where's this Grease Fitting?
  • Thread Starter
#33  
Re: Where\'s this Grease Fitting?

<font color="blue"> So what is the orange colored rod that looks like it might support your right side fender? Maybe a bungee cord? </font>

That's a cord to a light bulb used to shed some light in the area I was photographing. I bought the cord to match the tractor. /forums/images/graemlins/tongue.gif

<font color="blue"> Why are you using the lowest hole for the Top link pin? </font>

No particular reason...

Don
 
   / Where's this Grease Fitting?
  • Thread Starter
#34  
Re: Where\'s this Grease Fitting?

<font color="blue"> So what is the orange colored rod that looks like it might support your right side fender? Maybe a bungee cord? </font>

That's a cord to a light bulb used to shed some light in the area I was photographing. I bought the cord to match the tractor. /forums/images/graemlins/tongue.gif

<font color="blue"> Why are you using the lowest hole for the Top link pin? </font>

No particular reason...

Don
 
   / Where's this Grease Fitting?
  • Thread Starter
#35  
Re: Where\'s this Grease Fitting?

Question #3.

Where would this zerk fitting be in the attached picture?

Don
 

Attachments

  • 885832-DSCF0675.JPG
    885832-DSCF0675.JPG
    35.2 KB · Views: 174
   / Where's this Grease Fitting? #37  
Re: Where\'s this Grease Fitting?

That looks like it's on the front end steering. What I'm interested in finding is the one to the left of the differential when viewed from the rear as shown in the manual. Can't find it. Could only find 2 on the rear of the machine - 3ph lift arm linkage and right arm leveling crank.

Sure enought, the clutch and brake zerks are a little tought to reach. But, I got them anyway.
 
   / Where's this Grease Fitting? #38  
Re: Where\'s this Grease Fitting?

That looks like it's on the front end steering. What I'm interested in finding is the one to the left of the differential when viewed from the rear as shown in the manual. Can't find it. Could only find 2 on the rear of the machine - 3ph lift arm linkage and right arm leveling crank.

Sure enought, the clutch and brake zerks are a little tought to reach. But, I got them anyway.
 
   / Where's this Grease Fitting? #39  
Re: Where\'s this Grease Fitting?

This is great, and the timing couldn't be better as I'm doing the fifty hour service next weekend /forums/images/graemlins/smile.gif
Show me more...please /forums/images/graemlins/crazy.gif
Tom
 
   / Where's this Grease Fitting? #40  
Re: Where\'s this Grease Fitting?

This is great, and the timing couldn't be better as I'm doing the fifty hour service next weekend /forums/images/graemlins/smile.gif
Show me more...please /forums/images/graemlins/crazy.gif
Tom
 

Tractor & Equipment Auctions

Hilti TE 2000-AVR Electric Jack Hammer (A49461)
Hilti TE 2000-AVR...
2016 GENIE GTH1056 TELESCOPIC FORKLIFT (A51242)
2016 GENIE GTH1056...
2016 VOLVO VNL TANDEM AXLE SLEEPER (A51222)
2016 VOLVO VNL...
2015 KUBOTA 1140CRX RTV (A51406)
2015 KUBOTA...
BUSH WACKER ST-180 ELITE BATWING ROTARY MOWER (A51406)
BUSH WACKER ST-180...
2009 MACK CXU613 DAYCAB (A50854)
2009 MACK CXU613...
 
Top