/ why not run PTO chipper infeed from tractor power beyond, instead of separate PTO hydraulic pump
#21
OP
orangetree
Gold Member
See my OP
why not run PTO chipper infeed from tractor power beyond, instead of separate PTO hydraulic pump
- Thread starter orangetree
- Start date
- Views: 5513
/ why not run PTO chipper infeed from tractor power beyond, instead of separate PTO hydraulic pump
#22
Safest, of course, is to use as designed.
The higher flow could either over-speed or cause excess pressures in the device's motor(s) blowing the motors and/or causing other damage.
You could certainly rig a relief back to sump before the valve controlling the motors, to limit the pressure.
You can put in an orifice or adjustable (manual) valve to limit flow.
Each added part needed means some more cost.
You'll get the pump with the chipper.
I'm assuming you plan to get the chipper either way.
So, hook it up with pressure gauges on the lines.
Get some pressure measurements on the tractor's system.
Then you can consider the flow AND pressure out of the tractor's hydraulic system.
The higher flow could either over-speed or cause excess pressures in the device's motor(s) blowing the motors and/or causing other damage.
You could certainly rig a relief back to sump before the valve controlling the motors, to limit the pressure.
You can put in an orifice or adjustable (manual) valve to limit flow.
Each added part needed means some more cost.
You'll get the pump with the chipper.
I'm assuming you plan to get the chipper either way.
So, hook it up with pressure gauges on the lines.
Get some pressure measurements on the tractor's system.
Then you can consider the flow AND pressure out of the tractor's hydraulic system.
/ why not run PTO chipper infeed from tractor power beyond, instead of separate PTO hydraulic pump
#23
twowoode
Bronze Member
- Joined
- Oct 29, 2013
- Messages
- 77
- Location
- Maryville Tennessee
- Tractor
- john deere 2155, Massey Ferguson gc1723eb tlb, ASV rc50, Ford 8n
So why mess with it at all? The hydraulic pump runs off of the chipper all self contained. You start trying to modify it to run from your tractor hydraulic system you void the warranty. Besides it’s an added expense that you have already paid for. I say leave it alone and be happy
/ why not run PTO chipper infeed from tractor power beyond, instead of separate PTO hydraulic pump
#24
Jofang
Bronze Member
- Joined
- Mar 27, 2018
- Messages
- 51
- Location
- Valojoulx, France
- Tractor
- Kubota BX2350, Kubota mower Z122, Fleming topper mower, flail mower, rotavator, wood chipper, grader box, Kubota auger, 20 ton splitter
Manufacturers place an hydraulic drive that is pre-set to control the power between the tractor and the machine. This way they guarantee that an end user cannot damage the machine and/or potentially injure themselves.
/ why not run PTO chipper infeed from tractor power beyond, instead of separate PTO hydraulic pump
#25
This one appears to just connect to your tractor's hydraulics:
www.woodsplitterdirect.com
16 Ton Tractor 3 Point Log Splitter 3PT16H - Wood Splitter Direct
Our 16 ton 3 point log splitter attachment for tractors are perfect for the small tractor owner.
www.woodsplitterdirect.com
/ why not run PTO chipper infeed from tractor power beyond, instead of separate PTO hydraulic pump
#26
kwbobwi
Bronze Member
Maybe it's set up that way so if it's hooked to a 80hp tractor it won't be over powered.
Some desk jockey thought it up and figured it was a safety thing to cover their azz's warranty and liability wise.
Some desk jockey thought it up and figured it was a safety thing to cover their azz's warranty and liability wise.
