Work light LEDs DK 4510

[Nancy Kowalski]

Hi there. Want to add from and rear work lights to my DK 4510 for winter snow removal use.

What is the best wiring choice. I see some unused connections on the back. Any chance these can be useful?

 

[gimmodog]

most tractors are built with wires for a rear light even if doesn't come with one (a dealer addon) turn on the switch and check voltage at the unused wires. If there is 12 volts on the wires now then they are there for rear light.

 

[jabelding]

Not sure if yours has it but most Kioti's have a spare fuse with a rear connection point. On mine I actually found the connector on line that fit it and used the power to wire in my 3rd function valve. Here is a picture of mine, Rear right hand side.

 

[seaofblue]

Not sure if yours has it but most Kioti's have a spare fuse with a rear connection point. On mine I actually found the connector on line that fit it and used the power to wire in my 3rd function valve. Here is a picture of mine, Rear right hand side. View attachment 567067

What is the name of the connector? I’m trying to find one on Amazon but not having any luck. Thanks

 

[jabelding]

here you go
https://www.tractorbynet.com/forums...377552-customer-use-electrical-connector.html

 

[seaofblue]

here you go
https://www.tractorbynet.com/forums...377552-customer-use-electrical-connector.html

Thank you. What switch did you use if you don’t mind me asking?

 

[jabelding]

Just a normal toggle switch with a rubber boot.