Workmaster 25s flail mower.

   / Workmaster 25s flail mower. #1  

skikir

New member
Joined
Jan 12, 2021
Messages
21
Location
Eugene, Oregon
Tractor
LS MT125
How big of a flail mower can you run on an Workmaster 25s/LS MT125? I was going to get a Betstco 53 inch medium duty mower but they say it needs requires 22 HP at the PTO. I have one of their 53 inch rotary tillers that they say requires minimum 20 hp but doesn't even slow the tractor down on virgin ground. I don't want to go less than 48 inches because that is the width of the tractor. I want to clean out some woods and some small field mowing. What size are you running out there?
 
   / Workmaster 25s flail mower. #2  
The Betsco flail at 53" will work ok on your tractor. I ran a 60" finish mower on my MT125 without issue at all. Just remember that it's using up a bunch of power, so just slow down the travel speed.
 

Tractor & Equipment Auctions

Craftsman LT2000 42in. Riding Mower (A49346)
Craftsman LT2000...
Kubota SVL65-2 Open Station Rubber Block Tread Skid Steer (A51039)
Kubota SVL65-2...
2009 HINO 185 18FT BOX TRUCK (A51219)
2009 HINO 185 18FT...
2013 INTERNATIONAL WORKSTAR 7600 SBA 6X4 DUMP TRK (A51406)
2013 INTERNATIONAL...
2024 WABASH STEP DECK TRAILER (A51222)
2024 WABASH STEP...
(INOP) CATERPILLAR 259D SKID STEER (A50459)
(INOP) CATERPILLAR...
 
Top