thebmrust
Bronze Member
If we’re all lucky here, a future overage will trigger a sell off and all those who hoarded will have to dump because of retail price slashing. Prayers that we can get materials at less than last years low season prices.
Y'all Been Checkin' Lumber Prices?
- Thread starter Diggin It
- Start date
- Views: 229728
OP
Diggin It
Super Star Member
This is my target. When prices get back into this general area, I'll buy a few boards.
2-in x 8-in x 12-ft Southern Yellow Pine Lumber (Common); Unit Price $7.23
That's what I paid on 4/9/2020
2-in x 8-in x 12-ft Southern Yellow Pine Lumber (Common); Unit Price $7.23
That's what I paid on 4/9/2020
By fall lumber will be down to more reasonable prices. Probably (hopefully) not as low as they were two years ago though. Sawmill owners like to make a decent living also. In the last year mills around here have actually spent money on upgrades, rather than try to keep the old equipment gumped together for a while longer.
Solitary Man
Silver Member
I bought 12, 1 x 10x 12 Cypress boards today, rough cut, kiln dried; $400 bucks. Needed them for a greenhouse / potting shed project for my wife. Cypress is always pricey.
/pine
Super Star Member
- Joined
- Mar 4, 2009
- Messages
- 12,450
Why pay for KD cypress if it to be used in a wet environment?...if kept out of ground contact it is just about impervious to moisture...also no need for painting or sealing etc...
Solitary Man
Silver Member
It's what they had. I'll post a photo when I'm done.
/pine
Super Star Member
- Joined
- Mar 4, 2009
- Messages
- 12,450
No problem...I was just curious...
BTW...I'm not far from where those banjos played...
Frankenkubota
Veteran Member
- Joined
- Jun 11, 2020
- Messages
- 2,386
- Location
- Carthage NC...Deep in the woods
- Tractor
- Kubota MX 5800, SkidPro 4 in 1, Ratchet rake, SkidPro pallet forks
me too but i just failed my inspection because i had not enclosed my porch and carport ceilings. Insulation and wiring "exposed".
The inspectors here are GREAT! Nothing but help and suggestions.
I told him the ship lap i was gonna use was 3x what i budgeted for.
Good guy, suggested a different mill and called it a complementary inspection.
OP
Diggin It
Super Star Member
Not sure what this means to real people.
"Lumber futures fell as much as 3% Wednesday to $859.8 per thousand board feet, extending the fall beneath $900 as the commodity's rally continues to cool off.
Lumber prices surged throughout the pandemic as supply bottlenecks and soaring homebuilding demand pushed lumber futures higher. Now, prices are trading nearly 50% below their May 10 peak of $1,711 per thousand board feet."
markets.businessinsider.com
"Lumber futures fell as much as 3% Wednesday to $859.8 per thousand board feet, extending the fall beneath $900 as the commodity's rally continues to cool off.
Lumber prices surged throughout the pandemic as supply bottlenecks and soaring homebuilding demand pushed lumber futures higher. Now, prices are trading nearly 50% below their May 10 peak of $1,711 per thousand board feet."
Lumber continues to skid below $900 with the commodity in free-fall from May highs
Lumber prices are now trading nearly 50% below their May 10 peak of $1,711 per thousand board feet.
markets.businessinsider.com
deezler
Elite Member
- Joined
- Jan 30, 2012
- Messages
- 3,613
- Location
- Southeast MI
- Tractor
- Cub Cadet 7305, Kioti CK3510seh TLB
It means more reasonable lumber prices are coming later this summer.
