Yanmar 150d workshop manual/ loader manual

[California]

this agrees with Normde's assessment. A few things to look for before buying a used Yanmar.

The photo on that page looks familiar ... My cousin took that photo for me in Ben Luc in 2012. I posted it (and several others) here. After everyone's input, the thread became a pretty comprehensive guide.

Buying Advice How to identify a Vietnam refurb?

 

[Neat 1500]

Very possible the YM150 is a cobbled together tractor as stated in Hoyes avoid list. It clearly starts life as a YM1300D.

 

[normde2001]

Who do you suppose made up the YM150D hood banner and why?

 

[Neat 1500]

Who do you suppose made up the YM150D hood banner and why?

Don't know but Hoyes shows a YM150 as an avoid tractor as it is Korean made according to them but in reality it is a YM1300 which is a Jap grey market in this case.

 

[normde2001]

Don't know but Hoyes shows a YM150 as an avoid tractor as it is Korean made according to them but in reality it is a YM1300 which is a Jap grey market in this case.

And you know this how? This tractor has an external air filter. The YM1300 does not.

 

[California]

And I think the external air cleaner uses a different intake manifold, if its like my similar YM186D where the manifold has a flat flange where it emerges from the side cover and the donaldson filter is bolted to that.

So it appears to me this might be a YM1300 with YM155 components used as needed to overhaul it. Who knows where the YM150 hood decals came from, maybe Ebay.

 

[winston1]

I'm with Normde thinking maybe the Korean YM150. No reason to have a YM150 hood decal or where would it even come from?

 

[Neat 1500]

And you know this how?

Does he not say the serial number starts with YM1300D-XXXXX?

 

[careyo63]

On the Trans.13000-xxxx or 1300D-xxxx and stamped which should be correct. But he also said there wasn't a Ser. # Plate on the Eng. Block. With that being gone who knows what Eng. was used or what all was cobled together. It's really sounding like a Frankenstienermar.

 

[boltz]

Well am going to call a 1300D for now. Next problem is the axle leak on the front axle gear case. Does anyone have anything to share on changing the axle seal ? (should I start another post with a different title?) Got a seal from aftermarket seal and hydraulics supplier.(SKF), but have not been able to get a workshop manual, only have the parts manual for 155D, which looks identical for front axle so any help appreciated. Boltz