Yanmar Dash Parts (YM2002D)

[scooter133]

194151-55820 - Yanmar, Bulb, 12V3.4W (inscribed markings NSN 12V3.4W)
Also known as: HONDA OEM BULB 12V 3.4W) | 34902-259-003
With a BA9S base. The apparent LED equivalent is a 1157 LED Bulb.
Has anyone found a replacement LED version of this bulb that they like and works well for them?

194150-52160 - SWITCH ASSY, HORN/CHECK

194150-52170 -CAP, HORN/CHECK SWITCH


Thanks!

 

[ponytug]

194151-55820 - Yanmar, Bulb, 12V3.4W
Has anyone found a replacement LED version of this bulb that works well?

194150-52160 - SWITCH ASSY, HORN/CHECK

194150-52170 -CAP, HORN/CHECK SWITCH


Thanks!

If you have the bulb, have you tried searching / cross checking the number stamped into the bulb?

All the best, Peter

 

[bmaverick]

Are they the 53 bulbs found in the lamp gauge?

Then yes, you can go LED,

53, 182, 363, 1445​

LED Replacement Indicator Bulb 12VDC​

 

[bmaverick]

194151-55820 - Yanmar, Bulb, 12V3.4W
Has anyone found a replacement LED version of this bulb that works well?

194150-52160 - SWITCH ASSY, HORN/CHECK

194150-52170 -CAP, HORN/CHECK SWITCH


Thanks!

You can reach out to Fredricks for the Yanmar OE part or get this online anywhere for the horn switch.

Or get something nicer like the newer Yanmar machines,

Amazon.com

 

[scooter133]

If you have the bulb, have you tried searching / cross checking the number stamped into the bulb?

All the best, Peter

Thanks Peter, I’ve edited the question to be a bit more clear on my asking for the LED Bulb. I do have the markings and I’ve researched the bulb a bit, and the LED options look like crap. They don’t seem like they would fit in the rubber push-in’s on my Dash. I’m not looking for super bright Dome lights that are not needed, but are often the replacement LED version. I was hoping someone has used a bulb they like and could recommend that bulb, vs the junk I’m seeing out there.

Kind regards,
Scott<-

 

[scooter133]

You can reach out to Fredricks for the Yanmar OE part or get this online anywhere for the horn switch.
View attachment 1931264


Or get something nicer like the newer Yanmar machines,

Amazon.com

View attachment 1931268

Thats a Good Idea. I like that! They also make a Blank red ring for the Lamp Test button!

Thanks!

 

[bmaverick]

Thats a Good Idea. I like that! They also make a Blank red ring for the Lamp Test button!

Thanks!

Is the YM2002D a new machine for you?

 

[scooter133]

Are they the 53 bulbs found in the lamp gauge?

I edited the Question, but the bulbs say NSN 12V 3.4W,
HONDA OEM BULB 12V 3.4W) | 34902-259-003
With a BA9S base. The apparent LED equivalent is a 1157 LED Bulb.

The Honda bulb with part number 34902-259-003 is a 12-volt, 3.4-watt bulb featuring a BA9S base. The GE 53 bulb is a 14.4-volt, 1.73-watt bulb with the same BA9S base.

Thank you!

 

[scooter133]

Is the YM2002D a new machine for you?

No, it’s not new. I think I got it in 2006? I’ve not been kind to it, so now I’m trying to go though some things and get her cleaned up.

 

[bmaverick]

No, it’s not new. I think I got it in 2006? I’ve not been kind to it, so now I’m trying to go though some things and get her cleaned up.

oh, you avatar only mentioned the Deere D155, so I assumed you just got the YM2002D

 

[bmaverick]

No, it’s not new. I think I got it in 2006? I’ve not been kind to it, so now I’m trying to go though some things and get her cleaned up.

Oh, now I see why you need a new horn button. I love the dash and controls your machine has.
Do you need any of the engine manuals?

 

[scooter133]

Oh, now I see why you need a new horn button. I love the dash and controls your machine has.
Do you need any of the engine manuals?

I have the Parts, manual and service guides for the tractor. Thank you.
I do need a new Dash housing, Turn Signal Switch and Headlight Switch.
I have not dove into those 2 switches yet. I am open to non OEM types.

Though I looked the Hole for the Horn button is about 7-8mm. That Horn button on Amazon was 16MM. I’d have to carve out the holes for the 16mm version. I’ve seen a 12MM button. Will have to get some coming to see how they feel.

 

[bmaverick]

I have the Parts, manual and service guides for the tractor. Thank you.
I do need a new Dash housing, Turn Signal Switch and Headlight Switch.
I have not dove into those 2 switches yet. I am open to non OEM types.

Though I looked the Hole for the Horn button is about 7-8mm. That Horn button on Amazon was 16MM. I’d have to carve out the holes for the 16mm version. I’ve seen a 12MM button. Will have to get some coming to see how they feel.

To save time, I already dove into the headlamp switch. In extreme detail.

Headlamps flickering then quit working, finally solved.

Most of the YM series, both domestically sold and gray market have the Stanley headlamps and Yushin-Seiki switch. I had spend about 2-hours debugging the failed light. The bulbs are the halogen type Wagner HM202 that are the direct replacements of the Stanley P15D25 incandescent. The...

www.tractorbynet.com