Your Advices for New Rotary Cutter Design

[Exchanger]

A lot of conspiracy theorists... Again, My only interests is your feedbacks.

Regardless of the OP's location or motives, this would be a good thread for Landpride, Woods, Bush Hog, Kingkutter, etc. to read. Low cost improvements to their current products.

I hope so ! Sharing your feedbacks doesn't harm you, on the other hand with this way other companies and my company can hear your voice. Whole point of this thread is this. Nothing else. I will not respond any further theory. I have already explained myself a couple of times. That was the last one. If you are tend to create conspiracy theories, this thread is not the place.

If you don't want to share anything, just don't.

Most of the dealers don't care about your thoughts with a big similey face. Mostly they don't give any feedback to companies, when they do, companies just don't care becasuse of the selling numbers. This is why i supposed to wrote here to get real feedbacks.

Right now i am working on settable castor angle and better bearing at tail wheel. Thanks to your feedbacks. Others will be considered as well.

If company allows, i can introduce all product family in here. however, all products will be completed after one year.

 

[Exchanger]

What would you think about Separable blade holder & stumpjumper assembly ?

 

[ArlyA]

I whole heatedly agree with airbiscuit. Seems most company's don't care how people are using there products or want to hear back from them. I can tell stories after stories of some product that we purchased new, and it failed at the job we hoped it would preform and we couldn't even let the company know what happened. Point in case is the 2yo Tacoma with many shortcomings that I'm driving today*, and we can't give Toy any feedback, not to mention the ATV's, UTV's, snowmobiles etc, etc we've used over the years.

I for one is happy that some manufacture is asking "what do you want?".


*who is this statement going to make mad?

Regardless of the OP's location or motives, this would be a good thread for Landpride, Woods, Bush Hog, Kingkutter, etc. to read. Low cost improvements to their current products.

 

[Zebrafive]

What would you think about Separable blade holder & stumpjumper assembly ?

I know WOODS offers a stump jumper that is an "add on" to the blade holder bar. Bolts on with straps that go over the blade holder, then longer pins to account for stump jumper thickness/gauge.


I do not see it as a disadvantage or advantage

 

[quicksandfarmer]

Guide wheel for what exactly ? I mean why do you need quide wheel ?

I put guide wheels on my mower. They serve two purposes. When mowing, they keep the skids from digging in and chewing up the ground. I can set the mower all the way down and have it float over the terrain. In the barn they allow the whole mower to roll, so I can push it around. It's much easier for me to move the mower to the tractor than the other way around.

 

[quicksandfarmer]

9. If a shear pin style, make a carrier to keep spare shear pins.

Plus whatever tools are needed to change the shear pin.

 

[quicksandfarmer]

Wouldn't it be nice to have a drain on the gear box so the oil could be changed out easily.

Where would you put a drain pan under the gear box? I just use a simple oil extraction pump I got on Amazon.

 

[orangeandgreen]

Adjustable or removable side/rear panel to allow easier discharge of cuttings when in heavy growth, like yearly CRP maintenance. When cutting my native grass CRP in the fall, sometimes the tractor really bogs from the cuttings building up, then they roll out in a big clump.

 

[jmc]

A lot of conspiracy theorists... Again, My only interests is your feedbacks.



I hope so ! Sharing your feedbacks doesn't harm you, on the other hand with this way other companies and my company can hear your voice. Whole point of this thread is this. Nothing else. I will not respond any further theory. I have already explained myself a couple of times. That was the last one. If you are tend to create conspiracy theories, this thread is not the place.

If you don't want to share anything, just don't.

Translation: "If you don't want to share what I want to hear, just don't."

We love it when people parachute in from nowhere and start ordering us around. And we love censorship so that we can be like more advanced countries. Remind us again, what is acceptable and what is not acceptable on YOUR thread?

 

[Rustyiron]

Wouldn't it be nice to have a drain on the gear box so the oil could be changed out easily.

:thumbsup: Thank you Gary!