Search results

Bought this used and when I looked at the blades after using it for 100 hours I noticed that 2 blades had a couple inch notch in the middle at one end of the blade. The third blade was all steel like I would expect. Is this right? If I need blades I think the part number is Kubota K5647-97540...

When I bought my L3200 I found this forum to be invaluable in taking care of my new orange baby. I just bought a used Kubota RCK60P-28Z zero turn mower. I think I got a good deal...diesel engine only 680 hours - new fluids, filters and blades. I wonder if anyone can direct me to a similar Kubota...

So I normally attach a drag harrow to my RCR1860 rotary cutter when cutting the pasture to help break up the horse manure piles. Anyway, yesterday without thinking I backed up over the drag harrow with the cutter turning. Of course, the harrow was broken into about 10 pieces but my bigger...

I'm burying a small black poly irrigation water line about 12" deep. I had a fellow with a skid steer do some other work and he just attached what looked like an 18" or so spike to his loader and made the narrow trench I needed. I now find I have to extend that line. Do they make something...

So occasionally my L3200 would lose power. I had posted on this issue a while ago and have taken all the advice I've gotten from here and put it to good use. By that I mean, I've: Changed out the fuel filter blown out all the fuel lines dumped my diesel in case it was bad Added an algaecide in...

Given I am trying to maximize the weight I can lift with my new forks (or a bucket, for that matter), I know I need to counterbalance with weight on the 3PH. I have loaded rear tires , but no weights to put on other than a bushhog or other 3P implement. I was thinking about filling up my 60 gal...

Does anyone know what the correct washers are for an L3200HST 4WD oil plug? The part # is 6C090-58960 but I would like to buy them local (my dealer is an hour away). These are the flat copper washers. I assume everything on a Kubota is metric so my guess is that they are an M12 that you could...

This looks like a great idea...I'm tired of wrestling with my 3-point attachments so I'm going to order a set today. My question is what does the $25 stabilizer bar do? Any comments on this system would be appreciated.

On my L3200 HST I start the engine with the clutch engaged as normal and the PTO switch off (not spinning). When I let the clutch out the PTO engages and starts spinning even though I do not have it set to do that. There are two contacts below the PTO switch that are making contact/not making...

I was running my RCR1860 today and when I went to push the clutch in and disengage the PTO it did not stop (although it seemed to slow down). This happened multiple times. In fact, when I stood up the seat interlock did not engage and the PTO kept running. It looks like there is some kind of...

I'm new to tractoring but I think I picked a good one last year (with a lot of people's guidance) in a new Kubota L3200 HST 4WD for my 20 acre horse farm that is supposed to be our retirement abode. ;) Early this year it came time for the first 50 hour maintenance. I've done routine maintenance...

I'm new to tractoring but I think I picked a good one last year (with a lot of people's guidance) in a new kubota L3200 HST 4WD for my 20 acre horse farm that is supposed to be our retirement abode. ;) Early this year it came time for the first 50 hour maintenance. I've done routine maintenance...

I'm new to tractoring but I think I picked a good one last year (with a lot of people's guidance) in a new Kubota L3200 HST 4WD for my 20 acre horse farm that is supposed to be our retirement abode. ;) Early this year it came time for the first 50 hour maintenance. I've done routine maintenance...

I'm new to tractoring but I think I picked a good one last year (with a lot of people's guidance) in a new Kubota L3200 HST 4WD for my 20 acre horse farm that is supposed to be our retirement abode. ;) Early this year it came time for the first 50 hour maintenance. I've done routine maintenance...

I'm new to tractoring but I think I picked a good one last year (with a lot of people's guidance) in a new Kubota L3200 HST 4WD for my 20 acre horse farm that is supposed to be our retirement abode. ;) Early this year it came time for the first 50 hour maintenance. I've done routine...

I'm new to tractoring but I think I picked a good one last year (with a lot of people's guidance) in a new Kubota L3200 HST 4WD for my 20 acre horse farm that is supposed to be our retirement abode. ;) Early this year it came time for the first 50 hour maintenance. I've done routine...

I'm new to tractoring but I think I picked a good one last year (with a lot of people's guidance) in a new Kubota L3200 HST 4WD for my 20 acre horse farm that is supposed to be our retirement abode. ;) Early this year it came time for the first 50 hour maintenance. I've done routine...

I wonder if anyone has any experience with these 3 point pallet forks for my L3200: Pallet Forks, Pallet Fork, 3 Point Pallet Forks | Agri Supply, 72511, 3 Pt Palle These are only $160. I realize it is totally different than having a real set of forks on my loader but I'd probably be looking...

I have a LP RCR1860 rotary cutter to go with my L3200 and just realized in doing the 50 hour initial maintenance on the tractor I should have been greasing the cutter much more frequently...duh. In any event I started lubing the grease fittings I saw as described in the manual which is frankly...

On my L3200HST 4WD the manual says to remove the breather plug when greasing the front axle support. The plug is one of the square head bolts and I can't get it out. I seem to recall someone saying that the axle could be under pressure. Is that possible? Or should I just squirt some bolt...

I got the optional internal air filter that goes inside the stock air filter for my L3200. This internal air filter comes standard on the Grand Ls. The answer to this question seems obvious to me but I've learned not to assume... Does the internal air filter go in the same direction as the...

I was going to change mine out and put in a 50-50 mix of Prestone Extended Life coolant. I know my Powerstroke takes a special coolant. Thought I'd better check on my L3200 before I did it.

if there are any crush washers I need for the engine oil, Hydraulic fluid or Front Axle Oil. If so, what type (copper?) and size would I need. It doesn't say anything in the owner's manual. I've got all the parts and then I realized I may have forgotten the crush washers you need to replace...

new to this...I'm trying to take my Land Pride RCR1860 off my L3200. I have the 3 links off but I can't figure out how to take the driveline off the PTO. It has a black shield around it up by the PTO shaft coming from the Kubota. I thought there was a button or something to push to release it...

I'm tired of waiting on Southern States to come kill my weeds. Now that I have a new L3200, I decided to go take the applicator's' test and spray my own Grazon P+D (we have horses) - so I need a sprayer... I would like to get one that runs off the PTO. I understand that the electrical ones can...

now I need to figure out how to use it I'm trying to find information on basic tractor operations. Things like, the best way to fill a bucket and work a pile, how to use a box blade on a gravel driveway, how to get a smooth compacted path using a loader when filling in a ditch, the best way to...

They made a better offer than Barlow's (probably cause there 3 hours closer to me). Before I say yes though, I thought I'd check in... L3200 HST QC Loader LP RCR 1860 cutter Lowery Box Blade Loaded tires Telescopic Stabilizers Delivered (~3 hours one way) Full Fuel tank $19,000 With Lowery...

Made in Boaz, AL, they seem to be the ones the AL Kubota dealers push.

I saw this as part of a package deal with a new L3200HST w/loader and an 18' 7K trailer for $20,100 cash. Can anyone tell me about the quality of these Howse implements and whether this is a good price?

Plan to buy an L3200 before the end of the month. I can get the 66" bucket with the qc for an additional $666. However, I don't see the need and wanted some thoughts. I live in Ga so I don't have to move snow so don't need a snowblower. Also, if I get a 60" bushhog it seems as though a 60"...

Can someone tell me what these two valves do and the difference between these two valves? People are suggesting I get two of these for the back end when I order the L3200. I don't know enough about tractors other than I think they are where you plug in implements on the back end so you don't...

My wife and I are new at all this. We were raised in the city but our daughters got us into horses 20 years ago which has led to us buying 20 acres that we are developing into a horse farm as we move towards retirement. Five acres are in woods, 11 in pasture and the other 4 between the house...