Search results

After starting my 2350 while it was running, I got out of the seat and the engine stopped. Sitting back on the seat again I could not restart the engine. Looking at the switch under the seat it seems to depress OK but I still can't start the engine. Since I've owned the tractor (about 6 years)...

On another tractor site there is a discussion about the jerking when you pull your foot off the reverse pedal on BX 2350s in particular. I have a 2350 HTS I bought new in 2008. The tractor works well with the exception of the abrupt, to put it mildly, whiplash stop in reverse. A number of...

A few weks ago I posted asking for ways to repair the plastic fender on a 2008 Kubota BX. Thanks to all who replied with suggestions. I found a product called "WELD ON 790 Multi Purpose cement (it's normally used for PVC, CPVC, ABS and Styrene water pipes. The part of the cement I really liked...

I decided to run a test to determine which was the toughest between the plastic fender on the Kubota BX and a particular tree in my yard. It would seem that the tree wins hands down as I have two seperate pieces of broken plastic fender. Each piece is about 6"x8" or so that used to be right...

What is generally prefered on a roto tiller...a slip clutch or shear pin? Thanks for the help! Paul

Guys, I'm right on the edge of buying a Land Pride RTA 10 (forward till) 50" rototiller. It is rated for 17 - 25 HP and weighs 430 lbs. The other option is the RTR (reverse till) with about the same specs. It weighs a little more and is about $200 more, also rated 17 - 25 HP. They are made in...

Hi, There are a couple of used Kubota belly mount mowers for sale in my area. One is off a BX22...the other off a BX24. Anyone know if either one would fit a BX2350? Thanks for your help. Paul

About a month ago I posted about having a leak in the control valve on a new Kubota BX 2350. The tractor has been in and out of the dealer's and they made two trips to my house as they tried to fix the problem. The last time it went in it was there for over three weeks...waiting to get parts...

Hey guys, I could sure use a little feedback here. I'm working out of a workshop manual so I think I have the facts correct. The "control valve" on my 2008 BX 2350 Kubota (95 hrs) is leaking big time. "Control valve" is a fairly vague term in my mind, but it is the valve(s) directly under the...

This is probably not the right forum but I don't know which one to use... so here it is. I have never on this site heard the mention of gophers. I don't know that they are in all parts of the USA but they are here to stay for sure. Probably other parts of the country (and parts of CA as well)...

I just ordered a Pat's QH...should be here soon. A lot of people talk about not even having to leave the tractor seat when hooking up different implements using a QH. How do you not have to get off the seat to hook up the top link? I'm assuming that there is a "QH top link" you can buy...

Hey guys, I have a BX 2350 (75 hrs). I saw some fluid on the ground while I was working and traced it to what I'd call a "valve manifold" for lack of a better term. At the base of the joy stick where the stick enters this "manifold", hydraulic fluid comes pouring out of the top of one of the...

Hey Guys, I'm really confused about what size of roto tiller I should get for my Kubota BX2350. Because of the fact that I have only 23hp does that necessarily confine me to a tiller around 48"? A 48" will barely cover the wheel tracks. Seems to me I've read that some guys go over 48" to say...

I just today received my Markham toothbar. It was just like I was told it would be. Great tool, fits like it should and did not cost an arm and a leg. A fair deal by any measure! If there were more businesses like Markham in this country we might not be in the shape we're in right now...just a...

Hey guys, Has anyone experienced problems with the bearings built into lower link arms? The ones I'm speaking of are the bearings that you put the pins through when attaching an implement at the bottom end. Its the same sort of bearing that is on the implement end of the top link (I think it...

Hey guys, I've been looking for a way to "dig up" some ground. A rototiller as I understand it, while pulverizing the ground, will also leave a compacted layer of dirt as far down as the rototiller goes (8" to 10" or so). After several seasons of rototilling, especially when the ground is a bit...

Hey Guys, A question about the different tooth bars; there are bars that actually have a "slot" in the bar itself, that slips "over" the lip of the bucket. Also there are the kind that are designed to fit down "in" the little lip on the front of the bucket. One design, the slip over the lip...

Has anyone out there had any personal experience using a landscape rake with a BX Series (2350 Kubota is what I have). The problem of course is not HP but rather finding a rake that has the proper geometry to lift high enough with the hydraulics so that I'm able to lift off and clear a pile of...

First off let me thank the guys that responded to my first post I appreciate your time and effort. Since there was so little info on rakes I wonder if a few guys would chime in about them. The main question would be :there must be quality differences between rakes. strength of tines, are they...

I've been looking for a couple of attachments for my BX 2350, a landscape rake and a rototiller. In checking with one dealer so far it has been recommended that I purchase Gearmore in both products. The Model LR20 landscape rake with gauge wheels is $1000.00. The Model B120 tiller is $2080.00...

Hey guys, Been looking for some skid protection for a 2008 Kubota 2350. I contacted Bro Tek and got some pics but I'm still confused as to what I might really need. Bro Tek has a lot of stuff that looks pretty good but what do I need to start out with to at least keep me from sticking stuff...

Hey guys, I getting a new compact tractor (Kubota 2350) and I'm considering a rake attachment. I only have one acre but I'm tired of shovels, hand rakes etc. Question is how fine of a material will an attached rake pick up. Not looking to drag brush but rather little pieces and needles that...

Hello, New guy here. I'm getting a new Kubota 2350 in a week or so. My question is what tires should I get as Kubota offers 3 treads. The "turf" tire is out so it's between the "bar" tread and the "industrial" tread. Most of the use will be on dirt but I'm afraid the "bar" tread will tear the...