Search results

Hey gents, some thoughts? Using my tractor for the first snow of the season... rear mount snow blower 54" and tractor /PTO has more of a prop plane sound, vs the normal high pitch hydraulic pump sound. Only sounds like this when PTO engaged. fluid level is good... Tractor runs...

See my post here.. http://www.tractorbynet.com/forums/attachments/389124-snowblower-chain-routing-puma-54-a.html#post4938877 Thanks for any help guys...

See attached... Is this the correct chain routing w the tensioner. Chain is stretched and I have new chain, but as the tensioner pushes the chain down to increase tension, its hitting the cut out for the chain to pass thru... Its possible for the chain to go up over the tensioner, but...

I've wanted a cab for a long time for winter use, even more once I got a 3 pt snowblower 2 years ago... Really sucks taking a face full of snow when the wind isn't cooperating... Just wanted something to keep the snow off the face? I thought about a piece of plexi glass mounted behind the rops...

So after 7 years my splitter finally gave up . The steal around the wedge welds fatigued and tore. Wasn't too much hassle to pull the slide, and hydraulic cylinder, reweld the wedge. ran out of time to reinstall, but I hope to be back up and running on my next day off.

The fittings on the lift cylinder look like they were about to let loose, so after doing the 300 hr (actually 350hrs) I replaced 4 lines... Had to use vise grips to get a few of them, because the corrosion had worn away the flats for a wrench... Some how everything went smooth... despite...

Anyone know what size the JIC fitting is on the lift pistons... Mine are about done and going to order new from Surplus Center. Dealer aint open right now to ask... See pic.. Thanks

They say its going to be a doozie this winter.... So, I broke down and picked up a 3pt snow blower. I missed out a few years ago on a really good year, then we had no snow and I was glad I hadn't spent the money, but the last 2 years I wish I had... So...After looking for 3 months I found...

Worked the night shift and came home to this.....:mad:. Its not my main shelter for the Bota, but overflow for the lawn tractor and misc crap... I got the frame for $50 and made my own tarp walls and roof etc... It's mounted to PT 2x6x 16 and filled in w 3/4 crushed... I never did secure it...

Well for the first time in 7 years of owning my tractor. My fuel gelled up on me...Mostly in the filter that I could see.. Its actually mid 20's right now but we've had a cold snap with single digits at night... I know its been colder in the past... Maybe some crappy fuel... I have on...

Checking for a friend ..does the 3300 su have an alternator or dyno? Amp rating on the alternator if it has one? Thanks

Log Splitter Valve Question I have a 3 pt splitter, The Powerhorse (from Northern tool)..It splits both directions...The valve handle is a spring center (i believe) I have to hold the the handle thru the complete stroke both directions... This doesn't allow me to grab the next log while...

Just can't enough about my "Thumb" grapple. No more getting off the seat to chain up logs, or having them roll off the forks. With the exception of the hugh section of trunk, that I skidded out with my 3 pt 2" trailer reciever...(in 4 low and all the power she could muster) the rest was from...

So... I finally got around to installing my radio...I decided since I had an extra Sony CD deck (left over from my Jeep project) , might as well put it to use. Also had two speakers from same project.. Picked up a marine waterproof enclosure and an flexi antenna from Ebay for $12, $7 ...Low...

Forgive me TBN, For I have sinned...It has been months since my last post.... Last Nov, I bought a 94 Jeep YJ, and have spent all my time on Jeepforum.com. I hope I can be forgiven... Having recently hauling and splitting wood, I decided it was time to tune back into TBN.... While in the...

Had 20 yards ordered for delevery today, first thing this morning.. well yesterday late afternoon I walked by the bota and the R front was flat!!:(.... Ouch. I recently loaned the tractor to a friend and I think he did some demo work... When I picked the tractor up, the tire had air...Had to...

Seem like a no brainer but still wondering if I should extend my warranty.... another year for $600, same coverage as the original... my B is on ly 2 yrs old with 150 hrs.. Yeah, no brainer...:rolleyes:

Anyone in stall this kit (B7311) the 40 amp alternator upgrade? Put it in yesterday, and I've got no alternator output.. I'm on the 3rd alternator after assuming the problem was there, But still no juice...The wiring harness is straight forward and with the molex plastic connectors there...

I bought the sungaurd sunshade and overall very happy with it and the mounting system, but they want you to strap down the shade if you are towing it, Or load the tractor backwards. Make sense but I figured an more substantial solution was required...Project coming on...:rolleyes: Enxtended...

What is the science behind the ROPS height? None I'm sure... I know alot of bx owners mention they could clear or do clear garage hieghts by an inch or less. Why doesn't Kubot make the rops to clear standard garages. :( As I a B owner (7510) I may be wrong on the abouve statement but...

Thank you for visting..... The less popular sequel to...... " HOW MANY KUBOTAS DO YOU HAVE?" CHA CHING:D

Yup, Was driving into a pile of loam and something let loose under the hood and black smoke poured from the exhaust of my 7510... Limped it in to garage.... Now I need a trailer with a winch AND a rental tractor as I was in the middle of a project.... Not going to move 20 yds of loam by...

Would Like to upgrade my B 7510 to the 40 amp alternator. I know the dealers sell them but I can also get them on elsewhere, Ebay, etc... Question is....... Is there a whole alternator kit? (ebay just has the alternator) .........just replace the dyno with the new alternator :) .........Use...

I'm inquiring for a friend. so this all I know.. He was on a hill, bucket down hill, but used it to level out the tractor, When using the backhoe he lost all hydraulics on the BH and the HSD. Low level, so he topped of the hydraulics and was able to use the HSD but BH still not operating...

Finally installed my rear remotes and hydraulic top link...Thanks to those who provided direction and helpful pictures... The prince valve was larger than I had planned but worked out ok..Didn't like the grey so I painted black. Torched and welded the bracket myself. 1/4 lines to the front...

After seeing other comments / threads about the seats on the 7510 /7610 and other machines, I traded in my original seat for the upgraded one for the extra $25. WHAT A DIFFERENCE:D No more sliding out, having to keep your left leg extended and footed to keep your butt in the chair, or the...

If you've read my " Hauling the bota" post you know I trailer my bota regularly. That being said, it often easier to pull the trilaier out or park it when I'm done with the tractor. Problem is, I have my grader blade on the 3 pt, and bucket up front. I have a 3 pt 2" receiver mount but...

Looking for some input from those who use a dump trailer to haul thier bota. I just sold my 16' flat bed and replaced it with a Holmes 6 x 12 dump trailer. I haul my 7510 regularly in the winter for snow removal. I use the bucket and the rear blade. Obviously there was no problem fitting...

Bought the Powerhorse 3 point splitter from Northern tool, and although I was a bit skeptical on its performance, for the money it works great:D Ran the tractor at only 1500 rpms and that was enough to keep me busy. With the dual sided splitting ram, there is very little down time. Handled...

Installing my rear remotes on my Kubota 7510 rated for 7gpm total (4.4 gpm remote/3pt, 2.6 gpm power steering) the remotes are feed with 3/8 like the rest of the tractor. What size lines would you recommend for my snow plow blade / front grapple -They will use the same lines. I'm sure 1/4...

Got my new block heater from messicks. What is the solid piece of round stock for? :confused: No mention in the directions... There is a piece of 3/8 x 7/8 long round stock, polished steel in the box. any ideas? The block heater it's self is a pretty straight forwad install, so I can't...

Finally getting around to install rear remotes, going with a prince 2 spool w/ power beyond for my log splitter, but I would like to see how others mounted thier valves. I found a couple of pictures from a thread search, but we all like to share our handy work, so any of your pictures would...

Just dropped the 7510 at the dealership. While moving the snow today I slowly started to hear a metalic grating sound come from the right rear wheel area... At first it sounded like crunching ice under the wheel, so I ignored it for about 20 minutes but as I cleared the parking area it was...

I'm looking to install a set of rear remotes on my Bota 7510 with the following intention of current and future attachments... I have a plow, w/ manual angle. Has two cylinders (one on each side for power angle) with a single inlet and no outlets on each... Is it easier to replace those with...

I have 4 surface types that I need to clear on my property, Asphalt driveway, compacted nit-pak parking area, pea stone parking area, and my rear lawn... Yes, I said lawn.. Just a path to my fire pit and cord wood for heating. I have at my disposal My FEL, 6.5 foot plow mounted to my bucket...

Anybody have the part number for the upgraded 40 amp alternator that will fit the 7510? Any help would be appreciated. Thanks

I'm looking to intall a power beyond / auxillary hydraulic lines on my Kubota 7510. for 2 purposes. 1) to controll the angl of my bucket mounted snow plow, 2) for my 3 point log splitter (has its own valve) Can someone confirm that this TSC valve will do the work. Tractor Supply Company...

After finally finding a decent 6.5 foot plow, 2 1/2 round trip drive to pick it up, and about 2 hours of monkeying around / welding I was able to mount the western plow to my bucket. Thanks to all who offered their pictures. Manual angle...For now... Also mounted work lights and a...

After finally finding a decent 6.5 foot plow, 2 1/2 round trip drive to pick it up, and about 2 hours of monkeying around / welding I was able to mount the western plow to my bucket. Thanks to all who offered their pictures. Manual angle...For now... Also mounted work lights and a...

Anybody using one of these? Thinking of buying one... Seem like a no brainer for switch between implements. Any drawbacks to using one. I usually keep my 2" reciever adapter on the 3 pt to move my trailers, but change to my blade and or a wood splitter often. Any thoughts?

I am looking to install a 3 point log splitter on my kubota 7510. I'm buying a 16 ton with a piston to match the GPM, I have seen the threads on installing a rear valve set, but I do not need the valves as the splitter has its own, I do need to install a high pressure line and a return...

I am looking to install a 3 point log splitter on my 7510. I'm buying a 16 ton with a piston to match the GPM, I have seen the threads on installing a rear valve set, but I do not need the valves as the splitter has its own, I do need to install a high pressure line and a return. where...

installing hydraulic lines for a 3 point log splitter I am looking to install a 3 point log splitter on my 7510. I'm buying a 16 ton with a piston to match the GPM, I have seen the threads on installing a rear valve set, but I do not need the valves as the splitter has its own, I do need...