Search results

Im thinking of trading my 2013 3320 cab in on a new 3046R cab for the extra PTO power to run a large bush hog. My neighbor has contracted me to maintain his 25 acres and I feel the 3320 is a little underpowered to run a 6' bush hog in the thick stuff. Can you please tell me what my 3320 cab with...

I was out bush hogging today and noticed when I had the 3 point raised all the way up it would slowly drop an inch and then pick right back up into position. It is doing this about every couple of minutes. Is this normal or should I call the dealer...? Thanks guys..

I took my 300CX off today and noticed a slight rub in the side hood paint where the hoses run between the loader arms and hood. does anyone have the same problem and is there a way to fix it ..?....I thought about some heavy duty zip ties but im not sure even that would make it clear....

The dealer called me just before delivery and said there was a problem with my deck. They contacted Deere and they're replacing my 72D because of a cracked weld on the small plate the tire rides off of......It happened when the service guy drove over it to connect it. The dealer let me use the...

Guys I need your advice. I've been mowing my road ditches with my 2320 for over 3 years and I only felt unsafe a couple of times the first year until I got use to it but now Im worried that these same ditches will be scary with the 3320 cab. The ditches range from 15% to 30% angles with my tilt...

can anyone tell me if the loader hoses and the hydro lift for the belly mower are hooked up at the same time or will I loose my curl function connection for the mower lift cylinder to operate with the loader and mower on at the same time...?.......I had the mechanical lift on my 2320 and the...

Well guys..... It made it to the dealers lot and I should take delivery next week.... He's still waiting this week for the 72" auto connect belly mower to come in and the rear work lights and rear wiper....:thumbsup:

I went by the dealers lot today and seen it setting there all shiny.....I called my dealer and he said it came in with the wrong R4 tires because John Deere said they are behind on making the R4's that I wanted and it would be a month wait to get the correct ones.....so I can either settle for...

Im getting closer to getting my 3320 cab in the last of this month and I've looked at all the pics I can find on the internet........Guys if you have pics of your 3000 series cab or open station then I sure would love to see them.....Heck any tractor pics would be nice to see...I have tractor...

can anyone tell me what width the rear will be if I have the dealer change to the wide stance on the rear...?.....and will changing this make a big difference or should I just look into spacers or weights.....?.....thanks guys...... :thumbsup:

Im so excited that im loosing sleep...LOL.......:D I have on order a 3320 cab with 300CX loader, rear frontier GM3060 finish mower with Imatch chain kit and anti scalp kit, radio kit with the new Jensen cd/usb radio, rear wiper, rear work lights and im keeping my frontier bush hog, and Imatch...

I just bought this mower and realized I need to order the front anti scalp kit...... Does anyone know how much it costs and maybe a part number...?...... Thanks......

I just bought this mower to pull behind my soon to be 3320 cab and now my dealer tells me I need a quick hitch kit for it ($219)..........I like the mower but this was an unexpected cost.....can anyone tell me if this is a good price and what it actually does...? ....part number he gave me is...

I know this question has probably been asked before but I cant seem to find it in the search so I thought I would just ask......How tall is the 3320 Cab with R4's ...?.....im trying to make sure it will fit in my garage......I already ordered it but thought I'd ask just to be sure I don't need...

Hi Guys....Im about to trade in my 2320 for a new 3320 cab and loader...im tired of mowing in the heat and dust ...It seems like the older I get the more the dust and grass make my sinus's go crazy...... heres my question.....the dealer is giving me $14,000 for my 2010 JD2320 with 74 hours...

just testing the waters guys.......wondering what a good trade in value would be from the dealer on my 2320.........heres what I would trade...... 2010 2320 with 46 hours, 200cx fel and 62D mmm.........:)

thinking of jumping from a 2320 to a 3320 cab.....Im getting tired of mowing in 100 degree heat and the dust and grass blowing in my face all the time...... can you guys tell me how well the A/C works in these cabs..?:)

heres another pic of a practice weld I did today.....im going to welding school in August but went ahead and bought a mig welder to get the feel for it.... :) ...the bottom weld was just me playing around with the settings...:thumbsup:

Thanks to JB4310 here on TBN for the idea...... I welded a receiver tube to my Imatch quick hitch instead of buying deers attachment and bushings for around $240 ( 3-point hitch tractor receiver hitch )...I have a whole $25 in the receiver tube and paint and it works great...:thumbsup:

well guys I bought the lincoln 140 mig from lowes......im going to go to welding school in august so I thought I'd go ahead and start trying to learn.......heres a pic of some 1x1 1/8" angle iron I welded.....I've only had about an hour of welding experience to date so be nice guys...:laughing...

does anyone have the part number for the reciever hitch ......heres a pic I found.....:)

I have a 2009 chevy express 1500 cargo van that I do service work out of....im looking into getting a trailer (probably a PJ trailer) for my JD 2320 to haul it once in a while in case my family needs help with any work......the trailers im looking at are about 1800 pounds empty ....any help...

how can I tell if my 2320 rear tires are in the wide position already......:) .....

hey guys I just ordered the work lights from my local dealer along with the light brush guards they mount on...does anyone have pics of what they look like installed and can you tell me where they tap into the harness at....thanks :thumbsup:

so the john deere dealer sends out a mechanic to my house to put the independent hydro kit on and he didn't have any instructions to do it...so he tries anyway and ends up messing up the hose that came with the kit(cracked the fitting)...now he has to order the hose and pick the tractor up when...

I noticed that almost every pic I look at of the 62D it has pins through front brackets for moving the deck around with the iMatch or 3 point lower arms.....heres the problem...mine doesn't have the pins or even the brackets for the pins to go through...did JD change the deck for 2010 or did...

well here it is guys...everything in my sig except the Imatch...dealer has it ordered.....:thumbsup:

hey guys...the dealer is building my 2320 and will be bringing it out tomorrow but I had a quick question.....the kid that's putting it together showed me the front brush guard and how it folds down to have room to pop the hood....I noticed that it only folds down a quarter way before it...

ordered the 2320 with the loader and I think it comes with a 49" bucket....is there really a big difference in going to the 53".....I haven't taken delivery yet so I could still change to the 53" bucket...I think my dealer has both sizes on his lot.....but is it worth it guys...? and do yall...

Im too excited to sleep...:laughing:....the dealer said my 2320 is at his lot with the 62D....the frontier 48" bush hog will be here later today and the 200cx loader will be here tomorrow along with the imatch.....should take delivery friday....so the specs will be JD2320, 200cxFEL, 62D...

went to the dealer to drive my 2320 (waiting on loader and 62D to come in) and I notice when I kill the motor the whole front end shakes when it dies...is this just the nature of a diesel tractor or should I be worried.....remember guys this is my first tractor so don't laugh.....:D

will the 2320 handle a 5 footer or do I need to get the 4 footer....the dealer is telling me not to get the king kutter from tsc because the (his)frontiers are heavier made....someone point me in the right direction please...lol :thumbsup:

I ordered the 2320, 200cx FEL , and the 54D but from what I read here its (54D) tight to edge with and some are advising to go with the 62D because it sticks out farther to get in tight around trees and things....does anyone have a pic of the 54D or 62D and rear tires... I got time to change the...

I got the local dealer down to what I hope is a good price......the JD 2320, 200cx loader, and the 54D deck all for 15,800....I told him to go ahead and order it....this will be my first tractor so any info would help ....thanks :thumbsup: