I have a John Deere 4010 (field tractor), with a gas engine. I am having issues with getting it to run. I MAY have run it out of fuel (I personally don't think I ran it dry, but may have) It...

Greetings I have a 20 year old 4010 compact tractor, reasonably good shape has been serviced regularly. I noticed this past year the FEL doesn't seem as strong, the power steering, once in a...

Will a 120E or a 120R fit on my 4010 Compact Utility Tractor?

Where does white wire with inline fuze connected to silinoid connect to ignition switch

Where does white wire with inline fuse connect to ignition switch

What is the best 24 volt to 12 volt conversion kit for a 1963 Deere 4010 diesel? I intend to use 1 group 31 battery. Mounted by the starter. I need a new battery box anyway.

I'm in the process of tearing down and going through my 4010. I have a long list of items that need attention and while it's apart it will be getting blasted and repainted while apart. I'm to...

I have been working with a friend on his JD 4010 for many weeks to get this tractor running after it has been sitting for five years. We have changed so much on the tractor including the plugs...

I'm wanting to add a factory 3pt hitch to my 1963 john deere 4010 diesel. Looking for sources for a non running 4010 with factory 3pt hitch that is in good shape Also advice on what challenges I...

1963 4010 diesel Starter Solenoid 24 volt system Now the starter is just clicking when you go to start the tractor. It starts if you hit it a 2nd or 3rd time. $ hits of the key is the most it has...

Hi All, I'm new to TBN and this is my first post although I have spent many hours lurking before I decided to register. This forum is a great resource. Thank you all for your contributions! A...

1963 John Deere 4010 Diesel wide front, 24 volt What is this by the ignition switch with the yellow wire going to it? Is this a fuse holder for the lights?

I JUST CHANGED THE TRANSMISSION / hYDRAULIC fluid in the 1963 John Deere 4010 Diesel Syncro transmission. I used a John Deere filter and cleaned the screen behind the square plug. When I...

I am Looking for torque specs 1963 John Deere 4010 oil plug and filter housing I am terrible about tightening things by feel. In my younger day I would break off 3/8 bolts without ever noticing...

Where do I find a rebuild kit for a 1963 John Deere 4010 Syncro-range shifter? Or do I need to order each part by itself? Where do I find a good schematic with part numbers? Are there any good...

Hi All, I'm a tractor newbie and I know very little about hydraulics. I just had a Dual 3000 put on my 4010 (gas) and the hydraulics are too weak to do much with the loader. The bucket goes up...

The diesel engine won't rev up, stars hard and dies when at idle. I pulled the pump and found the metering valve stuck and there had been water in the fuel. I got the valve unstuck after using...

Hay maker with 1955 oliver and jd 4010 gas....................4010 gas starts in summer........has block heater and still won't start well in winter...any ideas out there? Cranks over good...2...

Has anybody used Pats quick hitch on a JD 4010 or similar tractor? I just bought a Hardee ditchbank cutter and its not set up to accept a standard quick hitch. Its awfully tight in there to hook...

My front loader and my 3 point hitch will not lift as heavy a load as it used to; I hear a strain like a clutch slipping, etc. Any ideas as what to check? This is my first tractor and this one...

I am working on a 4010 with steering issues. The steering valve plate cracked. After replacing the plate, and "butterflys" the tractor has no steering. Need help on the next steps before I pull...

I had my dealer quote loader mounts for my 4010 (410 loader) and it was a little over 600 bucks, does this sound right? Are there good places to look for used ones? I realize once they are on a...

After moving a zillion tons of snow yesterday (Sat) after Blizzard. Parked my JD 4010 compact in its unheated shed. Temp. went down to 9 degrees. This AM (Sun) turning the ignition key produced a...

I have a 4010 that sat for about 10 years. the only thing wrong with it at the time was the points and the plugs. When I finally got around to it, i had to have the carb and tank cleaned. the fuel...

have cleaned and changed filter all lines and pumps .understand there is aflow regulator or selinoid looking for any suggestions dont want to just by parts any help would be appreciated. thanks

I had a hydraulic leak on my 4010 between the control levers and under the steering wheel counsel and next to the gearbox. I loosened several hydraulic lines, including one small 12 inch long line...

I am purchasing a Fasse Valve with a elect switch today I need help with installation does it need a bracket and what does it look like because im a woman sometimes im sold stuff i really dont...

I have a tractor my great grandfather bought new in December of 1960. I am not sure if it was a 1960 or a 1961 model but it is a JD 4010 gas. It had set for about 10 years before i started...

Howdy, We are looking at buying an LP JD 4010, but would want to find a wide front end for it as well as an ROP or cab before doing so. Any help you folks could give in locating those items would...

Injection pump repair. Has anyone done this?

Just had a local mechanic install my 2 spool prince valve on my 1962 John Deere 4010. After a week of being home and not even an hr of use when trying to raise the loader without any weight it...

Hello I am new to this site. and I am hoping that someone can help me out. I just bought a 2004 john deere 4010 compact at an auction. I replaced fuel shutoff solenoid and it still didn't start, i...

What type of antifreeze should I put in my John Deere (early 60's model) 4010

Just curious as to what this is for on my 4010. I've looked all over the Internet with no luck. It appears that something threads onto this part that I have attached pictures of. Any help would be...

my dad and i picked up a ('62 i think) 4010 diesel for a good price to fix up and maybe sell, its more or less all original, but well used. my dad thinks this one is rare because it has from the...

Hello.. My Dad said he would sell the 1962 John Deere 4010D which he has dad since 1963.. I said that I would like first bid on the tractor and he said OK.. So I donot own it yet. I first...

Well I finally found a John Deere tractor that was in my budget, runs good, and in pretty good condition. I'm going to pick up this 4010 tomorrow if I can get off work at a decent time. My...

Just bought a JD 4010 Compact Tractor and have figured out most controls. But is the 4wd a full time feature if not how do you shift in and out of 4wd?

Looking for a good used John Deere 4010 in the central US. Interested in condition more than price.

Please fill me in on this unit. I'm about to take a look at it asking Price is 11,500. With, Finish 5', FEl, harrow, auger. 200hrs. should drive out to look at it 2moro.

I found 2005 JD4010 HST, FEL, 48"fm,PHD,BB asking $10,800 what do you think? it has 180hrs :o? ;)? :mad:?

I have a John Deere 4010 with a Roosa-Master Injection Pump. This pump has the governer built into the unit and the governer has broken apart and plugged the return line. After I clean out the...

The JD dealer just picked up my tractor a few minutes ago. Saturday morning I was running the 4' KK tiller and enjoying a fine morning of seat time. All was well until everything but the engine...

Hello, Is $10K a good price for a 4010, 47" snowblower, and 54" mower? The tractor has 70 hours on it. Not sure if it is a hydro. I'm asking for a friend. Thanks

I'm going to put up a shed for my soon to arrive 4010, but I don't know how long to make it. Could someone give me the approximate length of the 4010 with a fel and box blade? Does not have to...

I saw my first 4010 next to a 2305 at the local big JD ag dealer. I was quite impressed with the 4010, seemed more "industrial" less residential in size, tires, loader, tiller, at least how that...

Which is better B7510, JD2210, JD4010 or CK20?

They delivered my JD 4010 with 410 loader and LX4 cutter this afternoon. The guy showed me most things and answered all my questions. Then I went back and tossed some mulch with the loader...

John Deere 4010 54\" front blade I have not been able to attach the 54" front blade to the hanger that came with my 4010 tractor. I have two attachments a 54" mid mount mower and a 54" front...

The 4010 has 14 HP at the PTO. Is that enough HP to use a brush hog on 3 ft. high weeds and 1 inch sampling while mowing on hilly land ?

I know I do not have the most hours on,I have had my John Deere 4400 for 3 years and I have 650 hous on mine,mine has not been without some problems but I am quite happy overall. How many hours do...

I've been watching the board for a few months now, and really appreciate the help I've received so far. I've got about 4 acres of easy mowing and have been looking at both the JD4010 as well as...

I've been reading TBN for the past couple of months and I am impressed by the amount of useful information that is contained here. Like so many others before me I have finally convinced my wife...

I have narrowed it down to these. They are the "same" price around here and just can't make up my mind. I am getting it with a FEL and MMM. The JD dealer is pushing the 4010 but I like the size of...

My local JD dealer just ordered my new 4010. Should be here in 3 weeks. He told me that I would have no problem using the 4ft Howse cutter with the 14hp PTO on the 4010. But, after reading some...

I wonder if John Deere will ever offer a factory installed cab for the 4010 series with A/C like Kubota offers for there compacts ?

I have driven several JD model compacts and like the 4010 and 4110 for size and price. I have priced the following configurations from a local dealer. The configuration is as follows: 4010 -...

Any 4010 owners out there that can share their comments on the power of this new JD?

I recently purchased a JD 4010 with a 60" MMM. The rockshaft lever drops the mower all the way to the wheels. The manual says for best mowing results to make sure the wheels don't touch. How do...

As I explore all the possibilities for a possible upgrade to a CUT from my 445 this next Fall, I'm curious about the experiences of owners of the new 4010 model. While the specs seem to portray a...

I'm going to buy a John Deere 4010 with HST and FEL or a Kubota B7500 with HST and FEL. I know they are both good quality machines and both dealers are in my home town. I would like to know the...

Rumors are flying here and on CTB about the new JD 4010 series. Supposedly it will be available sometime between this fall and next summer. Reports from leaking dealers say that there will be 75...

I can't get a spark of any kind from the coil on this 4010 Propane tractor. I've changed the coil, condesor, points, wires and even been advised to add a 12v to 9v reducer (ceramic device) in the...