Its finally coming time where I'm going to buy a grapple for my tractor, I always planned to buy an EA 72" wicked root grapple with dual lids, it appears I waited to long to do this now. Any...

Switched out my JD quick attach to skid steer. That way, I can use all attachments for either loader or tractor. Also, didn't like the small flimsy oem bucket, so I bought a CNH Dirt & Foundry...

Lost the top spindle bearing on the right side knuckle drive. Not happy with JD parts on this. Super expensive and main axle drive gear not available. Not available from Spicer either. After two...

My son in law has our old 4320 and after the pto is engaged and the implement is lowered to the ground, the pto power slows down and stops. He has been told it could be the solenoid, any others...

I need help Was brush hogging and a large branch hit one of the hydraulic lines shouting off tractor. I removed the branch but now will not start. A tiny. Bit of fuild escaped Turns over but...

Was working on a burn pile yesterday when I popped a hose on my grapple, not a major gusher but a pin hole. Worked on the pile a little longer with the grapple working properly but noticed the fel...

I have an '09 John Deere 4320 with the 400cx loader. It has 3k hours on it. I had trouble with the right hand mount, uncoupling with heavy use. After looking at the wear of the mount and mast I...

Hope you don’t mind me inquiring here but I have a neighbor friend who’s looking to sell the 4320 she has after her husband passed. (He was a former Flying Tiger pilot whom I’ve had the privilege...

The PTO is slipping enough to where the brush hog blades are stopping in normal pasture grass so my search for a fix is in motion. First part I want to rip apart is the PTO Valve body. Has anyone...

Hi all, I have an opportunity to make an offer on a 2011 John Deere 4320. It has about 1200 hours and looks like a nice tractor. I was curious where this tractor stands with the emissions...

I have a jd 4320 with a 400x loader. I致e only had the tractor for a few months so I don稚 have a good baseline however any other tractor I have ever used if you can lift something with the...

I looked in my fuse box and the slot where the air ride seat fuse is supposed to go is hot but no fuse. Is there wire run back towards the seat for this? I have an open station tractor and I am...

I plan to add a solenoid operated valve on the rear of my 4320 compact and found this wire connector that is capped and would like to use it. Can someone tell me what it is for. It is on fuse 05...

I'm looking to add some LED lights to my new to me 4320 compact. I see there are two wires at the base of the ROPS that appear to be for "work lights". they are powered when the switch is all...

I'm picking up my new to me JD 4320 this weekend and want to start planning how I want to do my hydraulic upgrades. I will be using a lane shark on it and with that you have to plumb the return...

I'm in the process of buying a 2011 JD 4320, it has the power beyond kit for the back hoe but doesn't have any rear remotes. First I want to be able to have a grapple and also run a lane shark...

Someone I kind of know is selling a jd 4320 hst compact open station with roughly 300 hours and I believe around a 2011 model. It has a backhoe and some other attachments with it. First is...

Can anyone provide info on what is involved to add the LVB25959 MID PTO kit to a 2008 4320? Thanks very much

I am looking to put turf tires on my 4320 with cab and was wondering what the largest size is that I can go with on the rear. I have seen these with 44 x 18 x 20, but they look a little small. I...

I am looking to put turf tires on my 4320 with cab and was wondering what the largest size is that I can go with on the rear. I have seen these with 44 x 18 x 20, but they look a little small. I...

I have a 2013 JD 4320 with a 400cx and the loader control lever seems loose as it wiggles around a lot. The loader otherwise seems to operate normally. Is there an adjustment for this? I see there...

I moved my JD448 backhoe from a 3520 to a 4320 and looking for a new or used backhoe mounting plate kit, part # LVB25568 to mount a 448 to 4320. If anyone has a set they would like to sell please...

My 05 JD 4320 cab did not come with any manuals or literature of any kind, so I will be hunting for a owners manual and a repair manual, I figured I can buy one at the local dealer but I thought I...

I can't really find a accurate weight of the 2005 John Deere 4320 hydro cab with a loader and R4 industrial tires.

So I made up my mind the other day to buy a new Mahindra 1533 lol, but a 2005 JD 4320 cab tractor popped up with 800 hours. So if you have a review on a 4320 please share because I can't find a...

Was mowing yesterday and started loosing fluid, that appears to be coming from under the instrument panel may be related to power steering. How do I get a closer look at it and what might it be...

I have a 2007 John Deere 4320. When I turn the key to the run position, the dash does not power up normally. The only lights that come on are the indicator light for the glow plugs and the...

A 2009 JD 4320 tractor I looked at yesterday has err code 4 on the display. The code description is related to engine speed-No signal at engine speed input. I would like to know if anyone has...

I just picked up a used 2013 4320 with cab, 180 loader and 485 backhoe with 180 hours on it. I have a couple of questions about the loader and rear remotes that were installed. About the rear...

Ok, so my original post was how do I get the suction screen filter elbow loose from the hydraulic line? Found advice elsewhere - duct tape on vise grips applied to large line - worked back and...

I have a couple of projects: 1) Try to loosen up the throttle lever a little. It is very hard to push and pull. 2) Install a monitor and backup cameras, one to watch for traffic behind me when I'm...

Bobcat CT450 on TractorData John Deere 4320 on TractorData Spec-wise, looks pretty close. The JD 4320 has a 400CX loader and more 3pt lift (2500lbs vs 1870lbs). However, if the Bobcat CT450...

Does anybody have a coolant leak on their John Deere 4320, 4520 and or 4720 compact tractor? I have had a leak, some where on my 4320, for about as long as have owned the tractor, which is 9...

This past June I traded up to a John Deere 4320 from a 3320 and just learned that there is not enough room in the standard rear wheel position for the road chains that came with the new tractor...

Hello All, New here to the forum. I have had one tractor most of my life a 1988 Ford 1920 4wd with bush hog loader that I used at 12 years old to mow a 10 acre piece of land and i am now 30. I...

Hello all, I am located in the Hudson Valley region of New York. I am looking for either a 4320 or 4520. I am currently working with my dealer to transfer one to his dealership but i am afraid...

Back in 2007, we bought a JD 4320 for a current property we own. Life changed, and we ended up moving to 5 acres on the edge of town, so the tractor gets used for an occasional project, but has...

I posted this in the john deere owning/operating section but since I am relatively new to posting on this site I didn't know where would be the best place to ask for this type advice. I have a...

The left front axle seal on my 4320 is seeping a bit and I would like to know if anyone has done this repair and if so was it much of a job? I guess I should purchase a repair manual as the...

Hello: I posted this earlier in another, probably incorrect forum, and I'm stuck: I put the fel on my 5 year old 4320 this spring, and the SCV control stick does not try to re-center from left...

My 4320 transmission is surging up and down. When a greater load is put on the hydraulics either by driving up a hill or lifting my bucket the engine revs up and down. I changed the Tansmision...

My uncle thinks he wants the John Deere 4320 hydro. Any opinions out there? Thanks. Dave

Hello to All, I have a 2006 Deere 4320, 48HP Tractor with a 400CX loader on it. Bought it new, has 1204 hours on it now. Since day 1, the bucket has had a delay with the hydraulics. Lets say you...

jd 4320; looking for a mid duty 6' rotary cutter. It seems for strength and durability, the MX6 and Bush hog sq 172 are reasonable choices. I am not a mechanical guy and I am interested in...

Hello all, I have found a 2007 jd 4320, 400x fel, 448 backhoe, 265 hours. 99% R 4 tires. A nice clean machine with just some minor cosmetic issues. They are asking $35,500 for the machine. I would...

Hello: Has anyone changed their trans/hydraulic fluid on a Deere 43x0 series e-Hydro? 2006 model - the book says remove the elbow on the suction side between the trans and the pipe to the...

Hello, I'm changing trans fluid on my 2006 e-Hydro Deere 4320, but I cannot remove the 'elbow' between the transmission and the pipe to the oil filter. (400 hrs, it doesn't get a lot of use but...

Good Morning, I currently run a JD 5105 2 wheel drive and am looking to upgrade. I have looked at 3320's, 4105's new and am seriously looking at a 4320 used 2006 with 1300 hours. It has a...

For the past couple of weeks my tractor has approached 3/4 high temp to high temp and error code came on. I'd shut the tractor off and let the tractor cool down and the temp gauge went back down...

I just bought the engine coolant heater kit (RE235938) and trans heater parts (AR94493,AR95434,R34557,R43302). Of course, they came with no instructions. I see folks on this forum say they've...

Hey guys, a few days ago I posted wondering if a 4320 was big enough for my needs. It seems as though everybody I talk to says it is plenty big enough. The reason I asked in the first place was...

Hey everyone, I recently picked up a 4320 . Always wanted one of these old tractors. It needs a little work cosmetically but it is mechanically sound. I attached some pictures, I was wondering...

Just added hydraulic fluid and new filter but still will not lift over 750 lbs

Hello, my 4320 keeps on flashing a error code 67 upon start up. tried to look it up but no luck does anyone know what it is and how to clear it? thanks

I am looking at these two machines for our hobby farm. its about 46 acres, 35 of which are clear... were going to be bush hogging, skidding logs, running a grapple and feeding round bales...

I have an opportunity to obtain the BH in these pictures (not able to get the tractor). How difficult will it be to adapt it to a 2008 JD 4320?

Just drove a 4320 I really liked, but it had 2 issues I've got questions on: 1) The brakes gave a really weird kickback sensation when I pushed on them. Basically, when I pushed the brake pedal...

Received quotes on these two tractors I am considering purchasing for our land. John Deere 4320 MFWD DOM Cut Tractor with eHydro R4 Industrial, Dual Mid & Single rear SCV, engine block heater for...

Hi all- there already seems to be an interest here with security- the farm ext to me lost a brand new tractor. I am interested in at least trying to disable mine. We are very rural and the thieves...

We purchase from Jim at Quality Equipment in Roxboro NC, he was extremely helpful and is a no pressure salesmen. Very knowledgeable on all the tractors and implements. His pricing was inline with...

Need advise on pricing (Canadian) for the above mentioned tractors. I recently priced a 4320 and got a price of $32336 CDN plus tax (no cab, 400x loader ). I found online pricing for a 4105 for...

I am looking to sell my 2006 4320. It has been a great unit, but I am in need of a cab tractor due to severe hay allergies. It has 308 hours, filled R4s, 400x loader, vertical exhaust, 3rd SCV...

Saw one on a trailer next to me when I was fueling up the pickup yesterday. It looked cosmetically restored so it was rather nice looking. The person pulling the trailer was inside paying for his...

I have been experiencing a intermittened problem with starting. When the key is turned to the on position, (not to start ) the dash board should go through a self test procedure. All the lights on...

Hi all. I have a JD 4320 and over torqued one of the 4 bolts holding the post which the loader attaches to. It's an M16 bolt with course threads. I've looked for Heli-coil kits for this and...

I know that this issue has been discussed in the past, but I just thought that I'd share my experience. I've got a 4320 that I've had for about 1 year and 8 months. I've noticed some corrosion on...

My JD 4320 makes a loud grinding noise at random times when in C-3 or 4. When the "forward" pedal is to the floor. i have to COMPLETELY stop in order for the grinding to stop. It only happens when...

Got the oil and filter to do the first service on my 5 month old JD 4320 w/o cab. I was surprised to find the oil filter on my tractor from the factory is RE518977 because the Owner's Manual...

HI All, I have a JD 4320 with only 40 hours on it. I recently checked the Hydraulic fluild level and it was on the A on the ADD line on the dip stick. So I am low on fluild. I have never...

In short, I am selling my old Ford 1900 to my neighbor after I bought JD 4320 last year. I need info on the following: 1. I would like to attach my old Bradco backhoe, where do I get (or get info...

Hi, I have a 2005 4320 and I am adding a Fasse diverter valve to my third hyrdraulics. I need a 12 Volt power source back there to operate the switch. I noticed a wire stubbed out right behind...

Hello to all. I'm looking to buy a new JD 4320 eHydro open station with R4 tires and am looking for opinions on what would be a good/fair deal. I've checked with one dealer and he is giving 12%...

My dealer called me today to set up an appointment to replace the computer on my 4320. He said that John Deere approved the replacement. It's not a recall, but rather a product improvement and...

Hi Guys, Long time lurker, first time caller. This is a great forum and I just wanted to introduce myself. I live in Houston Texas and have 13acres near Hocklet that I am going to build a house...

I want to order a hydraulic top link for my 4320, but I'm a few hours away from my tractor. Does anyone know what the minimum and maximum lengths on the OEM top link are? I was looking at a...

my tractor is a cab type and i opened the rear window and heard some rattling noise sounds like a ring of steel on a pc of pipe maybe a nut is falling off or ????? where can i get a blowup of...

Does any one have the implement limitations for rotary cutters on this model? I can't seem to find it in the online manual? We are seriously considering this model, but have not decided which 6'...

I've read and read, and I think we've pretty much narrowed our tractor choice down to one of these 2. I've yet to get a price quote back home from the JD dealer, we're parked in our RV in...

I'm thinking about purchasing a Woods HBL84-2 rear blade and was wondering if anyone has had any experience with them. It's rated for up to 75 hp, mine's 48. It's also rated for Cat. 1 & 2, so I'm...

I am in the process of trying to purchase a John Deere 4320 and would like to get a Farmi Winch. The question is, will the Farmi JL351P be adequate. My use will not be commercial. This tractor...

I have a JD 4320 and looking for recommendations for a non-hydraulic Rollover Box Scraper. Does not appear that JD offers it. Would appreciate any input of actual users of such an implement...

Any thoughts would be appreciated. Does the JD use newer technology?

Although the local Kubota dealer has not impressed me, I wanted to make a fair comparison between the Deere 4320 and the Kubota tractor, and have the following questions for the board: 1. Laying...

Although the local Kubota dealer has not impressed me, I wanted to make a fair comparison between the 4320 and the Kubota tractor, and have the following questions for the board: 1. Laying aside...

genbuy-ML-880200-ML- Thread deals with 2 brands, JD and Kubota

Anyone have a 4320 and hear a whining noise coming from the power steering? I don't know if it's one of the hydraulic pumps working extra hard or what. I just got it in August so it's a bit...

Has anybody had actual experience and can anybody offer any tips of what to expect concerning the installation of the optional transmission oil heater element for extreme cold weather starting on...

Okay, here's another idea. I'd appreciate any input or advice. I started out looking at a JD990, bumped up to Kubota 5030HST, JD 4720HST, TC45DA choices. I'd love to get a 4720, but I can jump...

buyjd-ML-781038-ML- JD specific post moved to JD forum

This is follow-up on a thread in the Kubota forum which when I initially posted I was planning on a Kubota but after some additional research I have started to seriously consider a JD so have...

Hello, I'm about to pull the trigger on a complete JD package. I would appreciate some feedback on the following price I received on this package... 4320 4WD Ehydro, R4, Dual Mid & Single rear...

I've been all around the block, made a full circle back to these two tractor manufacturers. Obviously the 4320 being a bit larger and more powerful, 4120 is closer in ponies, my thinking of having...

I've been all around the block, made a full circle back to these two tractor manufacturers. Obviously the 4320 being a bit larger and more powerful, 4120 is closer in ponies, my thinking of having...

I am about ready to get the stuff together to do my 50 Hr. service. I would like to use Rotella 15-40 as I use this oil in my Ford pickup. I will stick to John Deer oil if there is a reason to but...

Hello everyone, I've been busy getting quotes for a new JD 4320, 4wd, eHydro, 400X FEL. I'm getting real close to being able to make a purchase. My businesses fiscal year ends June 30. I bought...

I went and tried out a new 4320 today. It was real nice. It is so new the salesman didn't even know where any of the controls were yet. They didn't have brochures or anything on it. I am in a...