Morning. Im in a pickle. I have a Massey Ferguson 1030 Compact tractor with major massive engine problems. I bought it two years ago and it was running really well. The engine seized, threw a rod...

I have a nose coming from the transmission area of my MF 1030. It continues even when the transmission is in neutral. Throw out bearing??

I have a 1984 Massey ferguson 1030 compact tractor, I believe it is a hindmoto, with a cracked block. Does anyone know if any other engine will fit in

I have a 1984 Massey ferguson 1030 compact tractor, I believe it is a hindmoto, with a cracked block. Does anyone know if any other engine will fit in this tractor?

When tractor is running can't engage pto , shut it off engage it and works fine. Any advice ?

Like many others, looks like my shifter boot let rain water into the tranny for many years, and I had the dreaded white oil, and recently lost hydraulic pressure. I'm sure it had water in there...

Someone selling a MF 1030 engine o toyosha 3 cyl 26hp? I need one for my tractor, anyone in anywhere Im interested Or what other engine can fit? Thanks

Someone selling a MF 1030 engine o toyosha 3 cyl 26hp? I need one for my tractor, anyone in anywhere Im interested Or what other engine can fit? Thanks

My understanding is the transmission fluid also runs the hydraulics on the Massey Ferguson 1030. We need to top it off or maybe change all of it with the filter. I'd appreciate it if anyone...

What's good TBN? I been reading posts and scouring craigslist for months trying to find a tractor to bush hog approx. 4 acres of pasture land. Well I recently contacted my local TYM dealer to...

I have a 1992 Deutz-Allas 5230 which is a clone Massey Ferguson 1030. We, not me, lost the radiator cap due to not putting it on all the way I guess. Anyway it is a 31Hp, 3cylinder diesel and as...

I just got a 1987 MF 1030 FWA and have a few questions as I am going about servicing the machine and becoming familiar with it. 1. I got a manual with the tractor that shows it is supposed to...

I just acquired a Massey Ferguson 1030 4wd. She is in need of some TLC but I think is going to be a nice little tractor. The model number on the tag only says MF1030. I know there are some 1030-L...

i have replaced some gears how do you time the crankshaft on a massey ferguson tractor 1030

I am trying desperately to find some massey ferguson 1030 4wd front axle parts. I need the upper and lower king pin bushings for this tractor. The dealers have told me that they can get the king...

I have a 1984 Massey ferguson 1030 compact tractor, I believe it is a hindmoto, with a cracked block. Does anyone know if any other engine will fit in this tractor?

I have a 1987 MF 1030 with a blown Toyosha 3 cyl diesel engine. What other diesel engine can I get that will bolt up?

I have a good 1987 MF 1030L I am going to part out CHEAP. It spun a bearing and I am not going to spend anymore money to repair. It has good sheet metal, pumps, etc. It was running fine and...

I am looking at an 87 MF 1030 4X4 with a FEL and 1700 hours this tractor is some distance from me and I won't be able to inspect it personally...everythign is supposed to work with no leaks and...

hI all i posted on gray market also... Lookimg for engine parts for Toyosha 3cly diesel 23hp 1.4L. May have a spun crank. Any help, maybe overseas contact? Thanks matt

Hi all, just got a broken MF 1030, looking for engine parts?? Anyone have contacts or info on the Toyosha 3 cyl 1.4L 23hp? Maybe over seas.

I posted also in the massey section but have not got any feedback as of yet so here it goes. I am looking at a used 1030 2wd seems to be in good shape overall, would not hurt to have a paint job...

I am looking for a Front End Loader for my MF-1030. Does anyone have any experience with aftermarket FEL's for this machine? There are a few Chinese loaders available but my MF dealer said that...

I am looking at a used 1030 2wd with a little over 3000 hours, my questions are they good tractors? who made them some company in Japan I think? What do you think the life expectince is of a 93...

Hello: My MF 1030 seems to have the left rear brake sticking. I have turned the adjustable brake rod under the tractor all the way out and even disconnected that brake from the pedal and still the...

Would any one happen to know where I could get a radiator for a MF 1030. It's the early 142 3-Cylnder diesel. S/N 00312. My local dealer always has one word for every part when I need it...

I am looking at purchasing a tractor in the next few weeks. I have about 10 acres of pasture to mow (infrequent here in Colorado), and a gravel drive to plow in the winter, scrape in the summer...

I am looking at buying my first tractor, a used MF 1030 with a loader. I was wondering what experience others have had with this model. I have about 10acres to brush hog and will also be using...

Current Symptoms: No Tach/Hour meter Three-point lift not operating FEL not operating I was using the FEL to pull t-posts to move a fence line. Tractor had been running fine, and...

I'm looking at an MF 1030; 4WD, bucket loader, 3PTH, 28HP, with a 6 or 7ft yard rake, about 1600hrs. Probably 1989 model. Private sale. Owner was asking $6,900. I'm offering $6,200. Does this...

My 1030 is stuck in Second Gear! Any ideas on how to get the shift lever back to neutral? Thanks for any input! Jeff

My buddy is looking at a used low hour(500) MF 1030 collar shift?, 2wd, turf tired tractor. He asked for my opinion but I have experience with JD's only, I found a little information online but...

\'86 MF 1030 I'm not a tractor owner-yet but I'm looking at a '86 MF 1030 with 670 hours on the meter. I need to mow over 2 bumpy acres of grass/weeds in Southern Maryland and it takes forever on...

I need a main shaft and a few gears for my MF 1030. Standard trans (non synchro). All leads appreciated. thanks. Chris in NE Florida

1) I was wondering on left side where the clutch pedal is what does that yellow decal state? (looks like something about adjusting or something?) 2) Need info on clutch/clutch pedal adjustment...

I was wondering a source of some wider tires wheels for 9.5x22 any ideas? or spacing them out 3-4" seems to be a std 6 bolt pattern are all the tractor rims 6 bolt the same?

I just recently purchased a MF 1030, and tried to look up the serial # on machinerylink.com, but could not find it. The # is 40577, but the closest I could find on that site was 40377. Could...

I have found a MF 1030 on an up coming auction. Advertised to be 3 cyl Diesel, 4wd, 1834 hrs, w/ 1016 loader. Don't know the year. Who made the engine? How much HP is this unit? Is this a lot...