B3200 FEL Quick Attach on LA352 (B7610/B2410)

[jas67]

I've seen here that the B3200 FEL quick attach can be used on the B2920/B2620 (and B2320?). I'm assuming that the B2920 and B2620 are using the LA354 FEL. I have the LA352 FEL on my B7610, and was going to pay to have a QA of the same design made for it, but was wondering if the B3200 QA would work for me?

What is the loader arm spacing (on center) of the LA354, also, the Pin spacing, and the pin diameter?

I may have to drop by a dealer with my tape measure.

Also, what is the cost of the QA?

Thanks,
Jay

 

[NH-Rob]

jas67,
The b3200 loader is built closer to the tractor than the 7610. Your loader is much wider than mine. When I had the quick attach on my 7510 I got the dealer to order it from ATI I think I paid under $200 for it. It was a quality piece. Look at thier web site for pin on quick hitches.
Rob

 

[jas67]

What is the spacing of your loader arms?

The Woods loader on my B7100 had a spacing of 36", the LA352 on the B7610 is 39"

The other thing that sucks about the LA352 ( and it's syblings, LA302 and LA272) is the low 69" max height. The Woods ony B7100 had a max height of 84"