Electric diverter..

[kennyd]

That 9-5117A valve is out of stock.

Shows 24 this morning...9-5117A

 

[DonT-B7500]

I used a relay so that when the switch is open the relay suplies power through the NC contacts, push the button and it goes through the NO contact

 

[jd2305cd]

So Don do you have the A version?

 

[J_J]

Either valve will work as long you apply power correctly.

 

[DonT-B7500]

I guess, mine is actually the Fasse version, it looks identical though, but I need power in both directions. It works like a charm you just have to get used to the re-gen feature of the Kubota FEL valve, when moving to the right you have to go beyond the detent or it works the same as going to the left

 

[jd2305cd]

JJ - I understand that, tyring to get an example of proper setup.

DonT - Sounds like you have the same valve as me, as i'll need power in both direction also, but i would like to use that same Hurst shifter you used, i like the idea of having i built right in.

So could you tell me more about your wiring, with a the relay setup?

Thanks
--Craig

 

[DonT-B7500]

Heres a diagram

 

[kennyd]

Heres a diagram

Great solution Don...that will work perfectly for JD2305-a simple 30 amp auto relay and any momentary switch.

 

[DonT-B7500]

As I said I actually have a toggle and momentary wired in parrallel, i never use the toggle but I would probably still wire it in, you never know what might come up.

 

[dcyrilc]

Relay...

Curl/dump on NC and grapple on NO with the push button for activation.