Birdman1970
Bronze Member
What motor did you use for rotating the chute? How did you mount it?
BX2750D Snowblower chute actuator project
- Thread starter mjribeiro
- Start date
- Views: 23657
What motor did you use for rotating the chute? How did you mount it?
keyman1808
Platinum Member
Here is the one I did.http://www.tractorbynet.com/forums/...ower-operational-questions-3.html#post2640359
I opted for the hydraulic version.
The motor was from surplus center, quick connects from discount hydraulics and the coupler was from Baileynet. The couple was also on surplus center but I couldn't find it at the time. The mount I made myself, Tacked it in place and sent it out for welding. If you would like part numbers PM me and I will send them to you
I opted for the hydraulic version.
The motor was from surplus center, quick connects from discount hydraulics and the coupler was from Baileynet. The couple was also on surplus center but I couldn't find it at the time. The mount I made myself, Tacked it in place and sent it out for welding. If you would like part numbers PM me and I will send them to you
Here is a video of the actuator. We only had 2 inches of snow, but I wanted to test it out. The actuator works great, absolutely no complaints.
Kubota snow blower chute actuator - YouTube
Kubota snow blower chute actuator - YouTube
keyman1808
Platinum Member
That's my next mid as soon as I fix the worm drive on my rotator
Birdman1970
Bronze Member
Absolutely awesome...
Which connector plugs into this socket? This is a really nice clean install.
I like their 90* plug, since it lets the cord hang down without any pressure on the wire. These are definitely not cheap, but for a mountable outlet solution they stay clean and look like they belong. These are standard issue on most touring motorcycles. BMW and other manufactures put them in handy places for heated accessories (gloves, vests, etc) and trickle chargers.
You can find most of their line on ebay with free shipping.
Right Angle Plug - Powerlet Products
bergenfelter
Member
Just finished my install with some of your suggestions built in. Thanks!
http://www.tractorbynet.com/forums/...g/234432-gr2707-snowthrower-install-pics.html
http://www.tractorbynet.com/forums/...g/234432-gr2707-snowthrower-install-pics.html
philm427
New member
BX2750D actuator install update: it's done and it works great in the shop. We're expecting some sort of snow out here Thursday or so, so we'll see how it all works out. Many thanks to all that contributed information and pictures. They were extremely helpful.
