Oil Recirculation in closed loop system

   / Oil Recirculation in closed loop system #91  
What you are saying is I believe correct when YOU are pushing on the end of the rod and the valve is closed because YOU are doing the work and not the pump. You are the mechanical force I was mentioning earlier. But when the pump is supplying pressure via the valve, then you are the force to be overcome. And I hate to hurt your ego but unless you have a very long lever and a good fixed fulcrum, the pump/cylinder is moving you.

Ken

Don't make fun of my skinny arms!
 
   / Oil Recirculation in closed loop system #92  
MossRoad

If you push the left rod in, the right rod extends.

The above is correct as the pump is filling both cyl and pushing old fluid to tank.

Turn the steering the other way and the flow reverses.
 
   / Oil Recirculation in closed loop system #93  
OK, I think I've got it...

The two full sides are tied together and the two empty sides are tied together.

Why didn't anyone say that before?

:laughing:
 
   / Oil Recirculation in closed loop system #94  
Orange is pressure, green is tank. Turn the wheel and they reverse. Right? I think I finally get it. :cool2:

Steering9.jpg
423776d1430964448-oil-recirculation-closed-loop-system-steering9-jpg
 
   / Oil Recirculation in closed loop system #95  
God help me if the legalize pot in Indiana....
 
   / Oil Recirculation in closed loop system #96  
ok, David, now lets see you animate that... and add the steering control valve for good measure...
 
   / Oil Recirculation in closed loop system #98  
Orange is pressure, green is tank. Turn the wheel and they reverse. Right? I think I finally get it. :cool2: <img src="http://www.tractorbynet.com/forums/files/power-trac/423776-oil-recirculation-closed-loop-system-steering9-jpg"/>

So the fluid returning to tank is determined by the steering control valve position, ie whether turning left or right? This thread has been a great read.
 
   / Oil Recirculation in closed loop system #99  
Whew, I am glad that mystery is over.

I thought I was going to have go back to the Holiday Inn and get more sleep.
 
   / Oil Recirculation in closed loop system #100  
Yes, that's the point.

So the fluid returning to tank is determined by the steering control valve position, ie whether turning left or right? This thread has been a great read.
 

Tractor & Equipment Auctions

2019 HONDA PIONEER 5 1000 UTV (A50459)
2019 HONDA PIONEER...
Unused 2025 40ft. Texas Pride FT835524KGN 13 Ton T/A Gooseneck Flatbed Trailer (A49346)
Unused 2025 40ft...
Yale 50LX Cushion Tire Forklift (A49461)
Yale 50LX Cushion...
2014 Ford F550 4x4 Bucket Truck with Versalift SST40 - 45FT Working Height (A51039)
2014 Ford F550 4x4...
2017 JOHN DEERE 624K-II WHEEL LOADER (A51242)
2017 JOHN DEERE...
2006 GMC C7500 DUMP TRUCK (A51406)
2006 GMC C7500...
 
Top