lets discuss preps for disasters

   / lets discuss preps for disasters #471  
Our neighbor has a newer Ford Focus. He wanted to put some fuel from a plastic gas can into it, but he couldn't figure out how since it doesn't have a gas cap. He finally figured out there is a funnel included with the car in the spare tire area that you shove into the filler and it opens the fuel filler in case you need to do just that.
 
   / lets discuss preps for disasters #472  
My F150 came with a funnel to use with a gas can.

It doesn't have a gas cap, just a door.
 
   / lets discuss preps for disasters #474  
Spent the day moving fuel from 55gal drum storage to my large tanks (300gal gas, 275gal diesel), and refilling from the local farm co-op with fresh fuel. The oldest gasoline was from Dec/2012, and it was $3.23 when it went in the drum, refilled today with $1.84. I use PRI-G in my gasoline, and it does fine.

Now both my big tanks are full, got 10-55gal drums of diesel and 5 of gasoline, and 2 of kerosene in storage.
 
   / lets discuss preps for disasters #475  
Spent the day moving fuel from 55gal drum storage to my large tanks (300gal gas, 275gal diesel), and refilling from the local farm co-op with fresh fuel. The oldest gasoline was from Dec/2012, and it was $3.23 when it went in the drum, refilled today with $1.84. I use PRI-G in my gasoline, and it does fine.

Now both my big tanks are full, got 10-55gal drums of diesel and 5 of gasoline, and 2 of kerosene in storage.

Now That's the way to do it!!
 
   / lets discuss preps for disasters #476  
Anybody been paying attention to the "junk" going on lately? I figured this thread would be be busy again ....

Anyone ever used a freeze dryer? I keep hearing ads for them on the radio ... a casual google search shows they are $$$$.

GAO Report: US Still Not Prepared for Possible EMP Attack
 
   / lets discuss preps for disasters #478  
   / lets discuss preps for disasters
  • Thread Starter
#479  
I have stepped up my self sufficiency in reloading materials, and am now just about ready to get into casting lead. By this time next month maybee I'll be getting a lead furnace and the rest of my molds. have a few pieces in already.
 
   / lets discuss preps for disasters #480  
I have stepped up my self sufficiency in reloading materials, and am now just about ready to get into casting lead. By this time next month maybee I'll be getting a lead furnace and the rest of my molds. have a few pieces in already.

Did that a number of years ago. Next you'll be researching Harbor Freight Powder coating or Hi-Tek epoxy to encapsulate the bullets to prevent leading etc. :)
 

Tractor & Equipment Auctions

Ford Super Duty 8ft. Truck Bed (A49346)
Ford Super Duty...
2017 JOHN DEERE  30G (A50854)
2017 JOHN DEERE...
2021 CATERPILLAR 259D3 SKID STEER (A51242)
2021 CATERPILLAR...
2018 PJ 40T/A GOOSENECK TRAILER (A50854)
2018 PJ 40T/A...
TOYOTA 42-6FGCU25 LP SIT DOWN FORKLIFT (A50854)
TOYOTA 42-6FGCU25...
4- 6 DRILL COLLARS (A50854)
4- 6 DRILL COLLARS...
 
Top