lets discuss preps for disasters

   / lets discuss preps for disasters #471  
Our neighbor has a newer Ford Focus. He wanted to put some fuel from a plastic gas can into it, but he couldn't figure out how since it doesn't have a gas cap. He finally figured out there is a funnel included with the car in the spare tire area that you shove into the filler and it opens the fuel filler in case you need to do just that.
 
   / lets discuss preps for disasters #472  
My F150 came with a funnel to use with a gas can.

It doesn't have a gas cap, just a door.
 
   / lets discuss preps for disasters #474  
Spent the day moving fuel from 55gal drum storage to my large tanks (300gal gas, 275gal diesel), and refilling from the local farm co-op with fresh fuel. The oldest gasoline was from Dec/2012, and it was $3.23 when it went in the drum, refilled today with $1.84. I use PRI-G in my gasoline, and it does fine.

Now both my big tanks are full, got 10-55gal drums of diesel and 5 of gasoline, and 2 of kerosene in storage.
 
   / lets discuss preps for disasters #475  
Spent the day moving fuel from 55gal drum storage to my large tanks (300gal gas, 275gal diesel), and refilling from the local farm co-op with fresh fuel. The oldest gasoline was from Dec/2012, and it was $3.23 when it went in the drum, refilled today with $1.84. I use PRI-G in my gasoline, and it does fine.

Now both my big tanks are full, got 10-55gal drums of diesel and 5 of gasoline, and 2 of kerosene in storage.

Now That's the way to do it!!
 
   / lets discuss preps for disasters #476  
Anybody been paying attention to the "junk" going on lately? I figured this thread would be be busy again ....

Anyone ever used a freeze dryer? I keep hearing ads for them on the radio ... a casual google search shows they are $$$$.

GAO Report: US Still Not Prepared for Possible EMP Attack
 
   / lets discuss preps for disasters #478  
   / lets discuss preps for disasters
  • Thread Starter
#479  
I have stepped up my self sufficiency in reloading materials, and am now just about ready to get into casting lead. By this time next month maybee I'll be getting a lead furnace and the rest of my molds. have a few pieces in already.
 
   / lets discuss preps for disasters #480  
I have stepped up my self sufficiency in reloading materials, and am now just about ready to get into casting lead. By this time next month maybee I'll be getting a lead furnace and the rest of my molds. have a few pieces in already.

Did that a number of years ago. Next you'll be researching Harbor Freight Powder coating or Hi-Tek epoxy to encapsulate the bullets to prevent leading etc. :)
 

Tractor & Equipment Auctions

2017 GENIE GTH-636 TELESCOPIC FORKLIFT (A51242)
2017 GENIE GTH-636...
LOT LOCATIONS (A51219)
LOT LOCATIONS (A51219)
2017 Schulte FX107 84in Rotary Cutter Attachment (A50322)
2017 Schulte FX107...
2016 JLG 3248RS 32ft Electric Scissor Lift (A50322)
2016 JLG 3248RS...
2023 Case IH 4412F 12 Row 30 In. Row Spacing Folding Corn Head (A50657)
2023 Case IH 4412F...
HUSKY 135 PSI AIR COMPRESSOR (A50854)
HUSKY 135 PSI AIR...
 
Top