lets discuss preps for disasters

   / lets discuss preps for disasters #471  
Our neighbor has a newer Ford Focus. He wanted to put some fuel from a plastic gas can into it, but he couldn't figure out how since it doesn't have a gas cap. He finally figured out there is a funnel included with the car in the spare tire area that you shove into the filler and it opens the fuel filler in case you need to do just that.
 
   / lets discuss preps for disasters #472  
My F150 came with a funnel to use with a gas can.

It doesn't have a gas cap, just a door.
 
   / lets discuss preps for disasters #474  
Spent the day moving fuel from 55gal drum storage to my large tanks (300gal gas, 275gal diesel), and refilling from the local farm co-op with fresh fuel. The oldest gasoline was from Dec/2012, and it was $3.23 when it went in the drum, refilled today with $1.84. I use PRI-G in my gasoline, and it does fine.

Now both my big tanks are full, got 10-55gal drums of diesel and 5 of gasoline, and 2 of kerosene in storage.
 
   / lets discuss preps for disasters #475  
Spent the day moving fuel from 55gal drum storage to my large tanks (300gal gas, 275gal diesel), and refilling from the local farm co-op with fresh fuel. The oldest gasoline was from Dec/2012, and it was $3.23 when it went in the drum, refilled today with $1.84. I use PRI-G in my gasoline, and it does fine.

Now both my big tanks are full, got 10-55gal drums of diesel and 5 of gasoline, and 2 of kerosene in storage.

Now That's the way to do it!!
 
   / lets discuss preps for disasters #476  
Anybody been paying attention to the "junk" going on lately? I figured this thread would be be busy again ....

Anyone ever used a freeze dryer? I keep hearing ads for them on the radio ... a casual google search shows they are $$$$.

GAO Report: US Still Not Prepared for Possible EMP Attack
 
   / lets discuss preps for disasters #478  
   / lets discuss preps for disasters
  • Thread Starter
#479  
I have stepped up my self sufficiency in reloading materials, and am now just about ready to get into casting lead. By this time next month maybee I'll be getting a lead furnace and the rest of my molds. have a few pieces in already.
 
   / lets discuss preps for disasters #480  
I have stepped up my self sufficiency in reloading materials, and am now just about ready to get into casting lead. By this time next month maybee I'll be getting a lead furnace and the rest of my molds. have a few pieces in already.

Did that a number of years ago. Next you'll be researching Harbor Freight Powder coating or Hi-Tek epoxy to encapsulate the bullets to prevent leading etc. :)
 

Tractor & Equipment Auctions

2024 New Holland Skid Steer (A52377)
2024 New Holland...
2016 Club Car Carryall 1500 4x4 Utility Cart (A55758)
2016 Club Car...
2017 Kubota M7-151 Premium MFWD Tractor (A55315)
2017 Kubota M7-151...
John Deere 2040 Utility Loader Tractor (A55851)
John Deere 2040...
2011 Toyota Camry Sedan (A56859)
2011 Toyota Camry...
2016 Big Tex 24ft. T/A Flatbed Trailer (A50322)
2016 Big Tex 24ft...
 
Top