CADplans
Elite Member
I had the 7 foot landscape rake on the 650 after moving leaves a couple weeks ago,,,
so, I just "plowed' with the rake!! :thumbsup:
The rake did a great job of moving the snow,,, without moving hardly any gravel,,,
Snow Equipment Owning/Operating Pictures of your snow weapons
- Thread starter Timber
- Start date
- Views: 2330600
I had the 7 foot landscape rake on the 650 after moving leaves a couple weeks ago,,,
so, I just "plowed' with the rake!! :thumbsup:
The rake did a great job of moving the snow,,, without moving hardly any gravel,,,
CADplans
Elite Member
After plowing the driveway,,, I traded the John Deere for T W O snow plows,,,
Did I get a good deal?
Did I get a good deal?
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,616
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Doesn't get any better than that...
Pixguy
Super Star Member
I agree but tractors don't need money for college.
BrokeFarmerJohn
Veteran Member
- Joined
- Oct 7, 2016
- Messages
- 2,235
- Location
- Columbus Ohio
- Tractor
- 2017 Mahindra 5555, John Blue G-1000, Massey Ferguson 98, John Deere GP
I agree but tractors don't need money for college.
Idk my 4320 has its headlights pointed towards tractor college
Digital Design and Graphic Design Courses Sydney & Melbourne | Tractor(R)
It won't idle down about it.
Piston
Elite Member
Yeah, put the ROPS up so when you go under those snow-laden branches the ROPS will shake snow off and down your neck.. or just the branch will hit you in the back of the head..
Unless I had a FEL on or working on slopes in the woods, the ROPS would be down. I'm a safety nut too..
Don't you go using that common sense there boy!
(ROPS is useless if your not wearing your seatbelt "all the time" anyhow)
Cadplans, that's a great photo!
nikdfish
Veteran Member
We woke up to this view this morning (near Roxboro NC).
No pics of the tractor used, but had the 3038e out today with a rubber wiper edged 6' back blade doing the development private road from our place out to the county road (about 1/3 mile).
It was still snowing so the road was getting recovered as I worked (the middle was cleared before doing the margins), but the more snow moved, the less that will get packed into ice by traffic ...
After today I am pretty sure I am going to be picking up a set of chains for the loaded rear R4's. I have been looking at TireChains.com and considering either the "reinforced net" or the "twisted square" style. Any thoughts? Should I be worried about damaging the asphalt roadway (not in the best condition)?
Nick
No pics of the tractor used, but had the 3038e out today with a rubber wiper edged 6' back blade doing the development private road from our place out to the county road (about 1/3 mile).
It was still snowing so the road was getting recovered as I worked (the middle was cleared before doing the margins), but the more snow moved, the less that will get packed into ice by traffic ...
After today I am pretty sure I am going to be picking up a set of chains for the loaded rear R4's. I have been looking at TireChains.com and considering either the "reinforced net" or the "twisted square" style. Any thoughts? Should I be worried about damaging the asphalt roadway (not in the best condition)?
Nick
Creamer
Elite Member
Of course they will do damage to asphalt. Do like I do - use momentum versus power to plow snow - it is much faster and a lot more fun. The diamond treads I have on the back have no idea what traction is in snow so I just use a lot of rpms. Road gear and an angled blade rolls the snow out real well - a little more speed gets the snow moving better. Plus it is a lot more fun.
My tractor came with the house and with a set of chains - they have never been put on in the 23 years I have owned it. I have too much fun without - why go to the work of putting chains on to remove the joy?
CADplans
Elite Member
At least we got the boy in the green sleeves out working this year,,,
last year,, all he did was look out the window,,,
Can his mom get a great pic,,, or what??
We have dozens of pics like that,, she just seems to have an "eye" for taking pics,,
both pics were taken with a phone,,,
Creamer
Elite Member
I have never tried my landscape rake for this. I will have to sometime.
Pixguy
Super Star Member
Piston
Elite Member
We woke up to this view this morning (near Roxboro NC).
No pics of the tractor used, but had the 3038e out today with a rubber wiper edged 6' back blade doing the development private road from our place out to the county road (about 1/3 mile).
It was still snowing so the road was getting recovered as I worked (the middle was cleared before doing the margins), but the more snow moved, the less that will get packed into ice by traffic ...
After today I am pretty sure I am going to be picking up a set of chains for the loaded rear R4's. I have been looking at TireChains.com and considering either the "reinforced net" or the "twisted square" style. Any thoughts? Should I be worried about damaging the asphalt roadway (not in the best condition)?
Nick
What do you use for a runner edge?
I use ladder chains and have never noticed any damage or scrape marks on the pavement (I do a lot of on road driving on my dead end street) but then again I take it easy and baby the tractor, I don't spin my tires on pavement.
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,616
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Watching that boy look out the window brings back the heartbreak that I had when that age.. and just had to watch and envy.
But now, I'm grown up (old) and have my own toys that now just wait in envy for some more snow.
But every chance I get, I give the "boy" a chance to participate.. and the shovel action on the deck was a treat to see.
But now, I'm grown up (old) and have my own toys that now just wait in envy for some more snow.
But every chance I get, I give the "boy" a chance to participate.. and the shovel action on the deck was a treat to see.
kevinjd
Bronze Member
Here's a couple of pictures of doing a driveway. The video won't load, will keep trying. 
Piston
Elite Member
Now that's a blower Kevin!!! VERY nice setup!
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 24,646
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
I'd go with two link or four link ladder chains. Four links are cheaper, but a bumpier ride...two links are smoother, but quite heavy. Any chain can damage asphalt, but ladder types are less likely.
Before you buy chains...consider if you really need them. If your pictures show a typical North Carolina winter, then by all means, get the chains.
Net style chains are awesome. They offer great lateral stability. They are easier to put on than regular chains. They also have built in tensioners.We woke up to this view this morning (near Roxboro NC).
No pics of the tractor used, but had the 3038e out today with a rubber wiper edged 6' back blade doing the development private road from our place out to the county road (about 1/3 mile).
It was still snowing so the road was getting recovered as I worked (the middle was cleared before doing the margins), but the more snow moved, the less that will get packed into ice by traffic ...
After today I am pretty sure I am going to be picking up a set of chains for the loaded rear R4's. I have been looking at TireChains.com and considering either the "reinforced net" or the "twisted square" style. Any thoughts? Should I be worried about damaging the asphalt roadway (not in the best condition)?
Nick
Just spin the tires (excessively) and you will be fine. If you feel it starting to spin let up on the pedal.
nikdfish
Veteran Member
Thanks for the comments guys! Gave it some thought & cost/benefit examination and decided that: (a) my need is pretty sporadic; (b) I was getting by, if slowly, without getting stuck with the R4's and (c) the majority of traction issues were front/back rather than lateral slip. That suggested the standard ladder configuration (4 link) was probably the right choice for a bit of improvement on ice & the least likely to damage asphalt of the options out there. I ordered a set + tensioners from TireChains.com & they should be in this week.
Nick
Nick
powerscol
Veteran Member
Yeah, put the ROPS up so when you go under those snow-laden branches the ROPS will shake snow off and down your neck.. or just the branch will hit you in the back of the head..
Unless I had a FEL on or working on slopes in the woods, the ROPS would be down. I'm a safety nut too..
I had to chuckle at this. First time I used my tractor in my field along the edges I lost count of all the branches that whacked me, Our came the cutters and a lot of trimming. I got pretty good standing on the seat and fenders - not safe, but worked. Now I can go anywhere on the property with the ROPS up - even through the barn door even when I forgot to raise it enough
powerscol
Veteran Member
We woke up to this view this morning (near Roxboro NC).
No pics of the tractor used, but had the 3038e out today with a rubber wiper edged 6' back blade doing the development private road from our place out to the county road (about 1/3 mile).
It was still snowing so the road was getting recovered as I worked (the middle was cleared before doing the margins), but the more snow moved, the less that will get packed into ice by traffic ...
After today I am pretty sure I am going to be picking up a set of chains for the loaded rear R4's. I have been looking at TireChains.com and considering either the "reinforced net" or the "twisted square" style. Any thoughts? Should I be worried about damaging the asphalt roadway (not in the best condition)?
Nick
Also check out Quality chain - their prices were better that the other folks for the Trygg set I needed, There are also rubber chains out there (section of reinforced rubber across the tread) - ladder style. I have no idea if they work or how durable they are, but they are supposed to be pavement friendly.
Hope this helps.
Here are some similar links:
