King Kutter Quality

[dragoneggs]

I'm not sure how KK is responsible for you buying a used blade that could have been bent when you bought it. Just saying.:confused3: or if it's welded on wrong heck of a time to complain now.

Agreed... not much if any recourse, but it is still piss poor quality. I still think bringing it to the manufacturer's attention is the right thing to. As I said earlier, if I was the manufacturer, I would want to know. Bad PR can hurt.

 

[DK35vince]

dog-gone-it, I keep forgetting! IF it didn't happen on TBN, then it didn't happen!!

MY bad!

SR

Never said it didn't happen.
But its certainly not a wide spread common issue.

 

[1M05]

if it's welded on wrong heck of a time to complain now.

If it's welded on wrong, which it is, the issue is not the timing of the customer complaint. The issue is your company has a problem that needs to be fixed.

 

[4get gto]

If it's welded on wrong, which it is, the issue is not the timing of the customer complaint. The issue is your company has a problem that needs to be fixed.

I know what you're saying. I see where the bottom brace is crooked but not seeing the top one being off ? Whether that's making it out of level I'm not sure.

 

[buckeyefarmer]

Not KK, but a TSC 35hp rated blade used on my 20hp massey. My fault for pushing on one end. I have no need for a blade anymore, but i keep it.

 

[1M05]

Whether that's making it out of level I'm not sure.

Unfortunately, I am.

 

[buckeyefarmer]

Heres the pic...

 

[Peter 315]

View attachment 536938
Heres the pic...

Good job

 

[Slowpoke Slim]

If it's welded on wrong, which it is, the issue is not the timing of the customer complaint. The issue is your company has a problem that needs to be fixed.

And the "problem" was probably fixed years, maybe even decades ago. That employee is probably long gone by now. Heck, I doubt they could even remember his name by now.

I agree with adjusting the 3pt and being done with it, but I guess if it just eats away at you, keeping you from sleeping at night, then go ahead and cut it off and reweld it.

 

[1M05]

go ahead and cut it off and reweld it.

Thanks, I was worried you wouldn't let me.