Best way to split 3'-4' boulder?

[PILOON]

From all I have gathered, Dexpan and probably 5-6 holes will split that nice.
I had a neighbor that even did that with 1/2" holes and plug and feathers, but he had lots of time on hand.*
He'd drill some 5-6 1/2" holes 3/4 thru and insert the plugs and pound with a 5 lb sledge and presto!
Under my cabin I also split with plugs but that was with a 300 cfm compressor, some 15 mins per boulder using 3 plugs/hole per.
I'd vote for dexpan and as big as your hammer drill will handle.
It works, I've seen it.

*shucks he even drilled with a small sledge and star shaped hand bit.

 

[/pine]

Anyone do any sculpting of large or outcropped rock etc.?...I have a neighbor that has some exposed granite that is just perfect for a mini Mt Rushmore type project...

 

[k0ua]

As nice as that boulder looks, I really believe it would sell.

 

[PILOON]

Anyone do any sculpting of large or outcropped rock etc.?...I have a neighbor that has some exposed granite that is just perfect for a mini Mt Rushmore type project...

Little 'mount rushmore' ???

 

[/pine]

Little 'mount rushmore' ???

Just used as an example...If it was on my property I would probably go with local wildlife and game profiles etc...It really is a perfect place for something like that...a natural outcropping along a well traveled community road...could become a landmark that will be there long after the current owner is dust...

 

[CobyRupert]

Here’s 7500 pounds of concrete. I think you’re off by at least double on the weight. View attachment 607004

Wait...you think rock is double 6000 lbs or 1/2 of that? 12,000?

 

[aczlan]

That’s a multi thousand dollar moving job which sets it past a stupid whim purchase for most people but hey there’s a sucker born every minute.

IMO, the target market is someone with a large skid steer or small to medium-sized excavator and a truck/trailer capable of hauling both the slidsteer/excavator and the rock.
For them, it's 20 minutes to load the excavator, plus drive time.

Aaron Z

 

[caver]

SierraBlaster

 

[4570Man]

IMO, the target market is someone with a large skid steer or small to medium-sized excavator and a truck/trailer capable of hauling both the slidsteer/excavator and the rock.
For them, it's 20 minutes to load the excavator, plus drive time.

Aaron Z

Maybe I’m over estimating the size of that rock but I’ve used a 95-2 Kubota a fair amount and own a John Deere 310. I have serious doubts about loading that rock with either one, at least by lifting it. Maybe rolling it up the ramps would be possible but that’s hard on rock and trailer. I delivered a rock to a guy that was a lot smaller than that one maybe a 36-40” circle and he couldn’t lift it off my truck with a skid steer in the 8-9000 pound range.

 

[kthompson]

I agree with aczlan. Person in the landscaping business is good potential buyer.