Thank you. Good to know.
What did you do on or to your LS Tractor today?
- Thread starter Diggin It
- Start date
- Views: 483626
Thank you. Good to know.
Thank you. Good to know that there are much cheaper options out there for diverter valves.
sodamo
Super Star Member
- Joined
- May 20, 2004
- Messages
- 18,379
- Location
- Big Island, HI
- Tractor
- Bobcat CT4545 LS XR4140H (Mine) BX2380 (wife’s)
Nothing too serious. Used my forks to move a partial pallet of garden soil
And turned 209 hours
And turned 209 hours
OP
Diggin It
Super Star Member
Dug up some dirt with the shovel on the back. Moved it with the shovel on the front. Guess I was diggin' it comin' and goin'.
Cool hour reading though.
Cool hour reading though.
LS Tractor Owner
Super Member
- Joined
- May 1, 2017
- Messages
- 7,665
- Location
- Edgewood, NM
- Tractor
- LS XG3025 TLB, Previously MT125 TLB, Craftsman GTS6500
:thumbsup::thumbsup:
sodamo
Super Star Member
- Joined
- May 20, 2004
- Messages
- 18,379
- Location
- Big Island, HI
- Tractor
- Bobcat CT4545 LS XR4140H (Mine) BX2380 (wife’s)
Cool. Just might have to keep my eye on mine.
Avenger
Veteran Member
I loaded some old growth logs onto a trailer for a friend. They have been drying for about 5 years or so. Only one log gave the loader any trouble, but still lifted it. Have I mentioned how impressed I am with this tractor?
(sorry for the bad photos, didnt realize they didnt turn out very well)
(sorry for the bad photos, didnt realize they didnt turn out very well)
Avenger
Veteran Member
Here is a better photo
These old trees fell down in a wind storm we had a few years ago. My friend dragged them to this area, put them up on 'blocks' and covered them with tarps for about the last 5 years. His intentions were to use them as support beams on a building, but instead, he is taking them to a mill to be milled down into large support beams for his new (fancy) deck he is building. This was the first load.
These old trees fell down in a wind storm we had a few years ago. My friend dragged them to this area, put them up on 'blocks' and covered them with tarps for about the last 5 years. His intentions were to use them as support beams on a building, but instead, he is taking them to a mill to be milled down into large support beams for his new (fancy) deck he is building. This was the first load.
mred2
Platinum Member
- Joined
- Aug 31, 2018
- Messages
- 888
- Location
- West Alabama, USA
- Tractor
- iseki tl3200, JD 450H dozer, LS XR4150, Genie Z34/22N lift
I have picked them up that big with my grapple, but had to carry them low to the ground. A lot that far forward. Most of my nice logs are pine. You can't even give them away down here. Something about the trees growing so fast that when they get real big, they don't make good lumber. I have some nice oaks, but trying to keep most of them.
Avenger
Veteran Member
I believe these are pine, or maybe Doug Fir. It's hard to tell without the bark. Some sort of evergreen anyway.
Here, they do grow fast, about as fast as they do. But these large, "old growth" trees are rare. Logging in the area limits how big they get. Trees that are too big for the industrial mills get to live longer, and turn into these massive logs when the wind blows them down. The wood does have nice close grain. Should make for some rather stout beams. I think he said he is getting 16"x16"x22' out of them. Good luck finding that at the lumber yard. :laughing:
Here, they do grow fast, about as fast as they do. But these large, "old growth" trees are rare. Logging in the area limits how big they get. Trees that are too big for the industrial mills get to live longer, and turn into these massive logs when the wind blows them down. The wood does have nice close grain. Should make for some rather stout beams. I think he said he is getting 16"x16"x22' out of them. Good luck finding that at the lumber yard. :laughing:
