TODAYS SEAT TIME

   / TODAYS SEAT TIME #11,431  
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
What the heck is that a 2x4 with a bolt cutter on the end......................
 
   / TODAYS SEAT TIME #11,432  
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
What the heck is that a 2x4 with a bolt cutter on the end......................

polesaw with heavy duty 12' extension
 
   / TODAYS SEAT TIME #11,434  
The link shows he attached the 2x4 to his grapple.

I made my old HF engine hoist into a FEL mobile hoist, then put the pole saw on that. Lots of reach, works good.
 

Attachments

  • jib6.jpg
    jib6.jpg
    873.3 KB · Views: 183
  • jib7.jpg
    jib7.jpg
    1.2 MB · Views: 195
   / TODAYS SEAT TIME #11,435  
The link shows he attached the 2x4 to his grapple.

I made my old HF engine hoist into a FEL mobile hoist, then put the pole saw on that. Lots of reach, works good.

Great minds think alike. My 4x4 pole quickly slides off, then use grapple for clean up.
20200720_150701.jpg
 
   / TODAYS SEAT TIME #11,439  
   / TODAYS SEAT TIME #11,440  
:thumbsup: Quite clever but what happens if the saw gets pinched 15' up on a tree, is that where the wife comes in............

Saw held on with bungee cord, 4x4 by gravity, only $100 saw - leave it in the woods and check after each windstorm. I'd probably snap pole if half if truth were known.
 

Tractor & Equipment Auctions

2003 SUZUKI VINSON 500 ATV QUAD RUNNER (A51247)
2003 SUZUKI VINSON...
PENDING SELLER CONFIRMATION  READ BEFORE BIDDING (A53472)
PENDING SELLER...
2011 Autocar ACX64 Xpeditor coe t/a refuse (A52384)
2011 Autocar ACX64...
HYD PUMP & TANK SET (A51248)
HYD PUMP & TANK...
2012 T650 BOBCAT SKID STEER (A51246)
2012 T650 BOBCAT...
UNUSED CHERY INDUSTRIAL SINGLE GARAGE METAL SHED (A51248)
UNUSED CHERY...
 
Top