New garage time!

   / New garage time! #991  
I'm getting a bit of vertigo looking at some of the pictures.
 
   / New garage time!
  • Thread Starter
#995  
You would not get me up on that roof. Heights and I don't get along. Jon

What's worse is when the pump jacks are half way up and I'm on the roof so I have to slide down to get there.

Loafers are in now. :)

I usually wear loafers when working anywhere off the ground, the sandals aren't very secure.
 
   / New garage time! #996  
What's worse is when the pump jacks are half way up and I'm on the roof so I have to slide down to get there.

You have your own fireman's pole. LOL Jon
 
Last edited:
   / New garage time!
  • Thread Starter
#997  
Needed to use my vice, but needed a place to clamp my vice. So I built a workbench. Steel is much less forgiving than wood. One leg was a little short. I figured it would settle, but even with me sitting on it, no go. It was heavy, Standing it up was a challenge but actually flipping it took about everything I had.

mA1NC6u.jpg


FxCwPSH.jpg


IpVVzZt.jpg


tF7G9hn.jpg


aQEFH3J.jpg


Pa8bFMy.jpg


RiuDgvX.jpg
 
   / New garage time! #998  
Might be some variation in the concrete also. Easy fix is square piece of flat steel slid under the short leg and welded. Double stack if needed.
 
   / New garage time! #999  
Nice job !! You always have the ability to get things done on the fly !! I have the same welder. Do you use the Argon gas with it or just use the plain wire ?
 

Tractor & Equipment Auctions

(2) METAL & WOOD STORAGE RACKS (A52708)
(2) METAL & WOOD...
15' WICK BAR W/ ALUMINUM MOUNTS (A52708)
15' WICK BAR W/...
2015 Ford Focus Sedan (A56859)
2015 Ford Focus...
Volvo EC220DL (A57148)
Volvo EC220DL (A57148)
Truck Metal Cargo Storage Box (A55787)
Truck Metal Cargo...
Topcon RL-H4C Laser w/Tripod & Grade Stick (A59076)
Topcon RL-H4C...
 
Top