New garage time!

   / New garage time! #991  
I'm getting a bit of vertigo looking at some of the pictures.
 
   / New garage time!
  • Thread Starter
#995  
You would not get me up on that roof. Heights and I don't get along. Jon

What's worse is when the pump jacks are half way up and I'm on the roof so I have to slide down to get there.

Loafers are in now. :)

I usually wear loafers when working anywhere off the ground, the sandals aren't very secure.
 
   / New garage time! #996  
What's worse is when the pump jacks are half way up and I'm on the roof so I have to slide down to get there.

You have your own fireman's pole. LOL Jon
 
Last edited:
   / New garage time!
  • Thread Starter
#997  
Needed to use my vice, but needed a place to clamp my vice. So I built a workbench. Steel is much less forgiving than wood. One leg was a little short. I figured it would settle, but even with me sitting on it, no go. It was heavy, Standing it up was a challenge but actually flipping it took about everything I had.

mA1NC6u.jpg


FxCwPSH.jpg


IpVVzZt.jpg


tF7G9hn.jpg


aQEFH3J.jpg


Pa8bFMy.jpg


RiuDgvX.jpg
 
   / New garage time! #998  
Might be some variation in the concrete also. Easy fix is square piece of flat steel slid under the short leg and welded. Double stack if needed.
 
   / New garage time! #999  
Nice job !! You always have the ability to get things done on the fly !! I have the same welder. Do you use the Argon gas with it or just use the plain wire ?
 

Tractor & Equipment Auctions

2019 DODGE RAM LARAMIE 5500 FLATBED (A58214)
2019 DODGE RAM...
2005 Volvo VNL Truck, VIN # 4V4N19TGX5N374968 (A57453)
2005 Volvo VNL...
PALLET OF TILE (A58374)
PALLET OF TILE...
2003 Big Tex 10PI 16ft. T/A Pipe Top Utility Trailer (A55973)
2003 Big Tex 10PI...
LOT: Kimball Midwest 4-Drawer Hardware Cabinet w/Contents & Stand (A59076)
LOT: Kimball...
2022 Polaris Ranger Utility Cart (A55787)
2022 Polaris...
 
Top