New garage time!

   / New garage time! #991  
I'm getting a bit of vertigo looking at some of the pictures.
 
   / New garage time!
  • Thread Starter
#995  
You would not get me up on that roof. Heights and I don't get along. Jon

What's worse is when the pump jacks are half way up and I'm on the roof so I have to slide down to get there.

Loafers are in now. :)

I usually wear loafers when working anywhere off the ground, the sandals aren't very secure.
 
   / New garage time! #996  
What's worse is when the pump jacks are half way up and I'm on the roof so I have to slide down to get there.

You have your own fireman's pole. LOL Jon
 
Last edited:
   / New garage time!
  • Thread Starter
#997  
Needed to use my vice, but needed a place to clamp my vice. So I built a workbench. Steel is much less forgiving than wood. One leg was a little short. I figured it would settle, but even with me sitting on it, no go. It was heavy, Standing it up was a challenge but actually flipping it took about everything I had.

mA1NC6u.jpg


FxCwPSH.jpg


IpVVzZt.jpg


tF7G9hn.jpg


aQEFH3J.jpg


Pa8bFMy.jpg


RiuDgvX.jpg
 
   / New garage time! #998  
Might be some variation in the concrete also. Easy fix is square piece of flat steel slid under the short leg and welded. Double stack if needed.
 
   / New garage time! #999  
Nice job !! You always have the ability to get things done on the fly !! I have the same welder. Do you use the Argon gas with it or just use the plain wire ?
 

Tractor & Equipment Auctions

CAT 350E2 Haul Truck (A55272)
CAT 350E2 Haul...
2025 Swict 66in Tooth Bucket Skid Steer Attachment (A56857)
2025 Swict 66in...
1996 Isuzu NPR Box Truck, VIN # 4KLB4B1R8TJ000333 (A57453)
1996 Isuzu NPR Box...
STIHL GAS POWERED HAND HELD BLOWER (A58374)
STIHL GAS POWERED...
2019 GALYEAN EQUIPMENT CO. 150BBL STEEL (A58214)
2019 GALYEAN...
2017 Jacobsen 3551 HOURS (A56859)
2017 Jacobsen 3551...
 
Top