How many Attachments?

[meackerman]

lets see..

3 pt backhoe (rarely use anymore, used it quite a bit at first until I learned why they're not made anymore)
box blade (used quite a bit)
back blade (used quite a bit)
PHD (used quite a bit)
disk harrow (used quite a bit)
chain harrow (hardly used)
cultipacker (meh, maybe if someone actually used the round pen or arena after I got them ready I would use it more)
potato plow (used quite a bit, been repaired a couple times)
tiller (used quite a bit)
carry all (hardly used)
trailer mover (hardly used, but really handy when needed)
FEL pallet forks
FEL brush forks

proly one or two more I'm not thinking of.

There doesn't seem to be much of a used tractor implement market where I'm at (or I'm looking in the wrong places) so everything either came with the tractor or I bought new.

 

[MechanicalGuy]

By cost;

$3800 6 way power 8’ scrape
$2400ish grapple 6’
$2200ish 6’ med duty bush hog
$650 forks
$850 7’ hd box blade

bucket with tooth bar

 

[kenmbz]

I feel under privileged:
FEL
BackHoe,
Plow,
SSQA hitch plate
Aerator
De-thatcher
PTB
Flail on order

 

[czechsonofagun]

blade, rake, carryall, scoop, water barrel carrier with pump, aerator

 

[3gunr]

3 brush hogs 1 finish mower 2 disks one plow one cultipacker, 2 rollers, one spreader, 1 box blade 2 angle blades 1 rear carryall, 2 sprayers, 2 tillers,no girlfreinds but one great wife.

 

[Ck2610]

Box blade
Rear blade
Pallet forks
Three point trailer hitch
Working on 6.5 foot western plow for loader
Ordered a quick hitch.
About three weeks ago,I finally got my tractor so it is a good start or an addiction. Either way makes me happy and no side effects yet.

 

[Complete Turf Care]

All of my equipment is used to make money. I currently have 3 tractors and a skid steer. Some of the attachments are demo units. Let see how many I can remember.

Trimax Snake 10.5' mower
Trimax Striker 6'4" mower
Imants Root pruner
Imants Shockwave
Imants Recycling Dresser
Vredo seeder
All of the above are demo units and I also do contracting work with them.

Turf Time topdresser
8' disk plow
6' disk plow
6' tiller
6' brush hog
8' laser grading blade
Landscape rake
6 yard dump wagon
Sod rolling attachment
3 pt. post hole digger (never used)
6' Agrivator

I'm sure there are more, but that's all I can think of for now.

I also have a Ditch Witch RT40 trenching machine and a Bobcat 322 mini excavator

 

[Williy]

I'm no gotta any now but it they ever get
here will have
backhoe
tiller 60"
fel
brushhog

During ww2 this Italian was on the bridge looking
for German submarines and CIC called and asked
him if that was a uboat out there. He says no it's
nota my boat it no belong to me

willy

 

[Newby first timer]

72" Front Bucket
Front Forks
Front Boom Pole (I Made)
EA 3 pt 72" Box Blade
Backhoe
Backhoe Attachments
Hydro. Thumb with Ripper extensions (I Added)
I fabricated my own Quick Connect.
24"
12" Rock Ripper (I added the Rippers)
10"
9" (i have not fine tuned to fit yet)

There are many other attachments I would like and I will get them as my needs require.

 

[MiserableOldFart]

RFM, chipper/shredder, box blade, Rear blade, PHD, snow blower. Looks like six. Seven if you count clamp on pallet forks for the loader. Eight if you count the 3 point box I put on a TSC frame.. Hope I haven't forgot any, lol.

 

[jjp8182]

Let's see:
1. Stock bucket
2. WR Long 1.885 bucket with toothbar (wanted a larger capacity 72" wide bucket for lighter materials)
3. box blade
4. finish mower
5. Danuser Intimidator
6. single lid EA brush grapple
7. pallet forks
8. sub-soiler
9. spike harrow
10. single-bottom plow
11. disc harrow
12. 2" square bar cultivator

13. carry all (currently on order)

(maybe 14 counting a quick hitch - which was only needed to use a borrowed wood chipper at one point since the pins had been replaced with bolts that'd rusted over)

I think that's everything - didn't really seem like that many until I started listing them out though... (not counting the fork-mounted receiver hitch.... attachments to attachments start to go beyond what I'd call a tractor implement/attachment )

...but there are also several more on the "wish list" for gardening & tree planting/care, plus some more material/debris handling items (e.g. 3pt pallet forks to be combined with a PTO roller pump & ibc tote for watering/irrigation).

 

[Smokeydog]

Not enough. Alway need just one more.

 

[Underdog57]

Looks like 8 or 9 if I count the thumb?

Land Pride RCR 1872 Rotary Cutter, Land Pride RB 3784 Rear Blade w/ hydraulic angle, EA 6' Landscape Rake, Titan 48" Pallet Forks, Titan 3pt Bale Spear, Titan HD Stump Bucket, Woodland Mills WC68 Chipper, Bearcat 70554 Chipper/Shredder, "The Thumb" grapple attachment for bucket & forks

 

[Chainsaw.]

I'm a tractor newb so not many, lets see..
Spring cultivator
Ripper/scarifier
Rear blade
Bucket
Home built Three point hitch attachment that is mostly used for Heading/skinning logs

Soon to come,
Carry all
Chain Harrow
snow blower

Wow, this really does get out of control fast!!

 

[wirlybird]

Let's see!
1. 4 foot brush hog
2. 5 foot brush hog
3. 6 foot finish mower
4. 50 inch flail mower
5. 4 foot box blade
6. 5 foot rear blade
7. 6 foot landscape/rock rake
8. 4 foot tiller
9. 6 foot drag harrow
10. 6 foot rotary harrow

I think that's it!
Looking to get a 5 foot flail but need recommendations.

 

[NIXON]

5ft grapple , Hd bucket W tooth bar ,pallet forks ,5ft brush hog , 7ft rear blade ,8ft landscape rake ,PHD , and just ordered a stump molester from Quick Attach .

 

[TmbrWlkr]

2 rotary cutters
Single blade plow
Roto tiller
3pt chipper
Box blade
Sprayer
Roller
3pt skidding winch
Grapple
pallet forks
Push plate (goes on quick attach mount to protect it in the woods)
60” bucket
Snow plow
Sub soiler


want: york rake

Is this a problem?

 

[bcp]

You need only one implement..........for each tractor. Think of all the time you will save not having to change implements. Each implement can be precisely matched to a tractor.

Bruce

 

[clarksvilleal]

That's all fine and dandy but how many girlfriends do you have? That's where real bragging rights count.

One, and only one, for 50 years and counting! Along with 34 grandchildren (and counting). Do those bragging rights count here ? I hope so.

 

[Sportsman762]

You need only one implement..........for each tractor. Think of all the time you will save not having to change implements. Each implement can be precisely matched to a tractor.

Bruce

I think my one friend has this approach. 8 tractors, its a pain keeping them all up and running.

I think I have 7 attachments. 2 back blades, box blade, flail, rotary cutter, tiller, and a weight.
I want a landscape rake, grapple, and wider bucket.