So i find myself in need of a grapple when i clear brush. I probably doesn’t need to curl the bucket and grab at the same time. Is the diverter valve kit and the grapple all i need? What is the benefits vs a 3rd function kit? The price doesnt seem to be too much more. In shopping a grapple, is there any difference in either compatibility with either 3rd or diverter valve kit? Thanks.
Diverter valve
- Thread starter Smf834
- Start date
- Views: 5175
kennyd
Advertiser
Diverters are generally easier to install on most machines since it stays on the loader and only an electrical connection goes between the loader and tractor. Both diverters and a true 3rd function will work great for grapple use.
I believe there is a OEM 3rd function option for your L2501, if that's available that would probably be your best choice.
I believe there is a OEM 3rd function option for your L2501, if that's available that would probably be your best choice.
BukitCase
Elite Member
- Joined
- Feb 17, 2012
- Messages
- 2,753
- Location
- Albany OR
- Tractor
- Case 580B, Long 460, Allis-Chalmers 160
"diverter valve is either on or off"
Not necessarily - a 12 volt diverter can "divert" the output of the bucket CURL circuit, which comes from the FEATHERABLE loader control... Steve
Not necessarily - a 12 volt diverter can "divert" the output of the bucket CURL circuit, which comes from the FEATHERABLE loader control... Steve
stumblinhorse
Platinum Member
- Joined
- Jul 15, 2022
- Messages
- 644
- Location
- Grand County, Colorado
- Tractor
- Case Farmall 75C, Kubota L3130
I thought it was the opposite. A diverted allows you to feather the loader control. 3rd function like a rear remote is on or off and can only be feathered by quick cycle of the control. I have a diverter and I can feather it with the joystick of my loader.
newbury
Super Star Member
- Joined
- Jan 8, 2009
- Messages
- 14,014
- Location
- From Vt, in Va, retiring to MS
- Tractor
- Kubota's - B7610, M4700
The cheap way to go is a pair of clamp on forks for your bucket and a rope. I slide the forks in to or under my brush pile then wrap the rope over. Sometimes I've used chain. Cost me about $120 10 years ago.
You need to decide how much you want to spend.
m7040
Elite Member
- Joined
- Sep 15, 2006
- Messages
- 3,572
- Location
- Frederick maryland
- Tractor
- Kubota M7040, MF 203 industrial, ZD331, RTV 1100 , Kubota Minix excavator, Unimog 404
I have the Thumb that I installed myself. Works well
Thumb grapple 24"
PREORDER - Grapples made as ordered, one week wait for unpainted, an additional week to get powder coated(gloss black) out of house, plus shipping timePlease contact us for unpainted (-$20) or custom
www.greens-machine.com
Does it need 3rd function valve or diverter is sufficient?
