Boomer 33 ECU

[mlsmith17]

Last summer I had a catastrophic electrical fire on my 2016 NH Boomer 33. Local dealer spent over $10k replacing multiple melted wiring harnesses, battery, and plugs. Unit ran for a while but the regen would not start and eventually it went into limp mode. Took back to dealer who now says the ECU needs replaced. On a good day this is a $2,800 part. However, the part is on backorder and not in stock anywhere, new or used, dealer or aftermarket.

Any ideas on tracking down a replacement ECU? I'm close to making this tractor an expensive yard ornament. Appreciate any assistance.

 

[TBob42]

I've seen a few sites for Breakers of tractors and equipment. Try used tractor parts and then use your model number. It may take a bit of detective work.
Apologies if I'm pointing out the obvious. And used ECM/ECU's are always a crap shoot.

 

[Jackfr]

Last summer I had a catastrophic electrical fire on my 2016 NH Boomer 33. Local dealer spent over $10k replacing multiple melted wiring harnesses, battery, and plugs. Unit ran for a while but the regen would not start and eventually it went into limp mode. Took back to dealer who now says the ECU needs replaced. On a good day this is a $2,800 part. However, the part is on backorder and not in stock anywhere, new or used, dealer or aftermarket.

Any ideas on tracking down a replacement ECU? I'm close to making this tractor an expensive yard ornament. Appreciate any assistance.

Checkout this Thread

New Holland Boomer 37 in DPF Shutdown Mode

I bought my 2015 New Holland Boomer 37 new. Didn't know it when I bought it that it automatically goes in Regeneration mode every four hours of operation. The manual says to stop operating the tractor until regeneration is complete. This takes 1/2 hour. It is a real inconvenience. Nowhere in my...

www.tractorbynet.com

and this youtube

 

[WM75Guy]

Might check with this company.

ECM Board Repair | Titan Systems