Anyone try the Holzfforma Fuel/oil container?

   / Anyone try the Holzfforma Fuel/oil container? #1  

Hay Dude

Super Star Member
Joined
Aug 28, 2012
Messages
18,398
Location
3 miles from where the gun was discarded
Tractor
Challenger MT655E, Massey Ferguson 7495, Challenger MT535B, Krone 4x4 XC baler, (2) Kubota ZD331’s, 2020 Ram 5500 Cummins 4x4, IH 7500 4x4 dump truck, Kaufman 35’ tandem 19 ton trailer, Deere CX-15, Pottinger Hay mowers
Unfortunately, my much liked Husqvarna fuel & oil refueling container broke. The auto shut off feature for the fuel side stays stuck open.
I really like this container and have used the heck out of it.
Bought it for like $40 in 2019.
Now they are $150.
I see there are replacement nozzles for other types, but haven’t found for Husq.

Found this

 
   / Anyone try the Holzfforma Fuel/oil container? #2  
I buy two stroke oil in six packs with each bottle just right for my 2 gal plastic gas can. When I run out, one unit of oil is poured in as I load the jug in the truck to fill ALL the gas cans at the station.

Can't get much easier.
 
   / Anyone try the Holzfforma Fuel/oil container?
  • Thread Starter
#3  
uh, you oughta try one of these Husqvarna cans for chain sawing
yes, it is much easier.


 
   / Anyone try the Holzfforma Fuel/oil container? #4  
I see there are replacement nozzles for other types, but haven’t found for Husq.

I found one on Ebay... for $47. The Holzforma looks kinda weird and with how well the Husky works I'd be tempted to choke up on the credit card and buy the replacement spout.
 
   / Anyone try the Holzfforma Fuel/oil container? #5  
I don't saw much (anymore) so I buy 40:1 & 50:1 premix by the gallon and decant onto smaller cans it comes in to take to the job. (Workers usually bring their own saws & mix. Fine with me. :) )

Those quart cans are also nice with other mixes for older ratios (30:1, others, re-labelled) and they don't need to be vented, so a mix remains fresh for years. I usually get two or more fills from a quart, but depending on the saw/tool that could be over two or more seasons. (12", 14", 2x18", 20" saws)
 
   / Anyone try the Holzfforma Fuel/oil container? #6  
   / Anyone try the Holzfforma Fuel/oil container? #7  
I don't saw much (anymore) so I buy 40:1 & 50:1 premix by the gallon and decant onto smaller cans it comes in to take to the job. (Workers usually bring their own saws & mix. Fine with me. :) )

Those quart cans are also nice with other mixes for older ratios (30:1, others, re-labelled) and they don't need to be vented, so a mix remains fresh for years. I usually get two or more fills from a quart, but depending on the saw/tool that could be over two or more seasons. (12", 14", 2x18", 20" saws)
A gallon a day, off the pile, is all these old bones can take... I saw in intervals "by the tank".
 
   / Anyone try the Holzfforma Fuel/oil container? #8  
I buy two stroke oil in six packs with each bottle just right for my 2 gal plastic gas can. When I run out, one unit of oil is poured in as I load the jug in the truck to fill ALL the gas cans at the station.

I add Sta-Bil to each gas can when I bring 'em home. Might go into the bucket truck, Mini-BH, chipper, tiller, golf cart, generator, ZTR, or get mixed for a trimmer, saw, or PHD but I never know where or when I'll pour it.
 
   / Anyone try the Holzfforma Fuel/oil container? #9  
uh, you oughta try one of these Husqvarna cans for chain sawing
yes, it is much easier.


Why so much oil? 1/2 as much as fuel? why carry oil that you will not use until you refill the fuel.

A solution to a problem no one has?
 
   / Anyone try the Holzfforma Fuel/oil container? #10  
I tired of messing with 2-cycle gas and pull-start stuff, now I have Ryobi 40V electric string trimmer and chain saw.
By the time the 4AH battery runs down so am I, so we go to the house for R&R.
I do have a 6AH and 2AH battery in the garage in case I feel feisty and want to cut more.
 

Tractor & Equipment Auctions

2 Air Cannons (A47371)
2 Air Cannons (A47371)
2014 Chevrolet Caprice Sedan (A46684)
2014 Chevrolet...
2006 Ford F-350 4x4 Pickup Truck (A46684)
2006 Ford F-350...
2025 Swict 84in Bucket Skid Steer Attachment (A46683)
2025 Swict 84in...
2016 Ford Taurus AWD Sedan (A48082)
2016 Ford Taurus...
New/Unused 7ft 10 Drawer Stainless Steel Workbench (A48837)
New/Unused 7ft 10...
 
Top