mllud
Gold Member
- Joined
- Oct 4, 2019
- Messages
- 302
- Location
- Missourian
- Tractor
- Massey Ferguson / New Holland 3010/ Ford 3550 Backhoe
That looks good. If you carried your vertical sides spaced out as you have it only as it goes up if you carried the contour around matching the shape of the hood. The sides could have a soft radius as the hood does curving back . And the top cross piece could be welded on the same plane of the hood. If 3" higher but carrying the angle as the top of the hood.
Pay no attention if you have already cut that will look great. You're making it yours!
Pay no attention if you have already cut that will look great. You're making it yours!
Last edited: