Search results

No slip clutch on the mower and the shear bolt is not broken. Hydrostatic drive on the tractor.

It is a hydrostatic transmission. The engine does not bog down, just the bush hog.

I was mowing grass with a 5 foot light duty King Kutter brush hog using a 40 horsepower NH tractor. It cut well in areas I had cut earlier this Spring but when it got into 2 foot tall grass (not that thick) it caused the blade to nearly stop but enough it did not cut at all. The mower has...

I think you would have more time, money and troubles trying to get it back up and running.

Richmond, IN

My brother went to buy some 2x4s 8 feet long. Recently $9, now almost $13 and they are No. 2s. Premium were not much higher. A small glass shower door, nearly $800. I really so not see how anyone can afford to build a new home right now, wiring etc. is also terrible in price.

Those were tears of happiness I hope.

I would suspect they might do that so the drop off is not as steep but one never knows.

Violet Implement in Delphos, Ohio is a Mahindra dealer as I recall. Near Lima, Ohio. Unsure if that is too far for you.

I would like to hear what you find out about the mini splits. Also considering the same.

I have lost a few over the years also.

I have been waiting about 2 months for an O ring for mine. Glad I am not a full time farmer either needing to harvest or plant.

You might see what your manual/dealer says about adding some fluid to the tires.

I would agree with the 6 feet recommendation. If you have many rocks do not get too light of deck or it will suffer. I was happier with my heavy duty unit than my light unit.

I am surprised more builders do not use steel studs. They are in our area priced less than wood. Are more uniform than wood.

well done

Will do.

These are some of the photos of the building. Hope this helps explain this a bit.

The plan is to have it livable. That would mean adding plumbing, electricity and heat and cooling. I was concerned enough about the big hunk of flooring concrete getting cold without insulation and the county inspector is worried about frost heave so he wants it insulated or...

The slab was poured about twenty five years ago.

Looks tractor close to me.

I have gotten parts from them a time or two.

You seem pretty handy. That would be more of a project than I would be capable of doing. Hope it all works out well for you, interested in seeing your progress and repairs.

I think I got mine back in the early 90s for that tractor which I still have. I think Yanmar had quick selling them them but one could still access them through the factory. I do not have the manual here but if there was a specific part I could try to look up the part number etc.

Unfortunately the oil pan and other parts have not come in yet. Glad I am not a full time farmer and it was in the middle of planting or harvest. This much down time would not be welcome. I suspect the parts have to come from Korea or wherever. I don't think they are stuck in the...

The building is at the top of a hill so all drainage is away from the building. When built put a ThouroghGlaze type sealant on it. Plan to reseal with a new product and then put down heavy plastic or Goodyear heavy rubber roofing under the joists. I think that will address the issue but...

I read where Frank Lloyd Wright had concerns with frost heave way back when. Part of his plan was good drainage and large roof overhangs to keep the moisture away. I have two feet overhangs on the length on one side and 13 feet on the other as there is a lean to there. The good news is...

I admire that you two were able to as much of the work yourself but sometimes with the roof and other projects it is good to have the pros come in with their specialized equipment and training. Years ago I helped do standing seam roof on barns, slate repairs on old homes etc. There...

The shop was able to chase the threads and put the blades and stump jumper back on. They attached it with a jam nut this time. The direction of travel is correct. Hope that helps this time.

Good to hear.

The volunteer trees seem to do better than the planted one. Never lost a tree that I planted at my home in town but no rabbits to nibble on them, I could water them on occasion and no competition with grass etc. I just have to be satisfied with what I have. Should have had a tree...

That is about the time I had my trees planted. Came from a nursery in MI, I think VanPines. 2500 each of white oak, red oak and walnut. 1000 white pines and 500 or so of a variety of trees. Plastic tubes that looked like upside down ice cream cones on 10 per cent of the trees. A...

I have such a device but found it slow, also a tooth type bar on my front end loader. I can try that also.

I was surprised you were given a sign off on this and for that I would try to get it in writing to be safe. Often if it is wet, they often call it a wetland, and if it is over 1 acre they get touchy if it is drained in some manner. The neighbors called in on my father when he worked on a...

I planted thousands of small white and red oaks about 25 years ago. For the most part an abject failure but that aside, for the ones that made it they are probably 15 feet tall or more but bases generally under 6 inches. The problem is some persistent weed trees have grown up very near...

I mentioned a heli coil but they said the pan is too thin for a heli coil to work effectively.

I have a Mahindra 4510 tractor. The oil pan has two drain bolts. One is stripped. The shop said they could not find an oversize repair bolt and as such had me order a new oil pan at over $300. I would have thought there would have been some other available cure. From memory I think...

I have a 3 pt 6 foot wide heavy duty Bush Hog brand rotary mower. It was a Township mower until they got a new one. This has happened 3 times in 6 years after about 50 hours of mowing each time. The nut holding the stump jumper and blade on comes loose and the stump jumper and blade...

Thanks for that information

How difficult/expensive to convert a 3 phase propane generator to single phase for home use? Would the transfer switch need to be changed also?

My cousin has a 1 cylinder Yanmar diesel tractor. Probably 40 years old. It is 2 wheel drive with front and rear wheel weights, a mower, a grader blade and a 3 point hitch rototiller. He said it is 11 or 12 horsepower. He thought the number was a 112 or 121. It is out in the...

Generac Guardian whole house generator. A friend has one he is not going to use anymore. Have interest but it is about 15 years old and I think it is a sold lifter unit and not the newer hydraulic lifter type. For the little they run how often and how much of a hassle is it to adjust...

I need to install HVAC in a 2 story building. At this time the walls and floors are pretty much open. My only real options are propane or electric for the most part. Have read some about the mini splits and comb heat pumps. Some of the combo heat pumps say they are quite...

Considering putting 2x6 joists over a 7 inch thick concrete slab. Over that 3/4 plywood and 3/4 inch T&G hardwood flooring. Anyone have any experience with loose fill Perlite as insulation over the concrete and between the joists? Compare this to loose fill EPS or a combo of...

I have a two story building sitting on a 26x36 monolitic slab built this way. All top soil removed, maybe 14 to 16 inches. Then compacted the soil. They about 9 inches of clean gravel added and compacted. Then moisture barrier of plastic. Then rebar and mesh and 7 inches...

I talked with a fellow that has done some CRP planting for me. He bought a new, 2020 New Holland cab tractor, said 4 wheel drive but perhaps MFWD, and a loader. $45,000. I would not have thought that possible. Glad he was able to secure such a good deal IMO from a NH dealer...

I have a wet area in a path near the river at the my farm. When it is really dry one can get a tractor across it. Not dry enough yesterday and got stuck. After cutting a tree to give more room I was able to get out after about 30 minutes. Ruts 16 inches deep and the mud is a black goo...

I was mowing with my Bush Hog brand mower with my Mahindra 4510 and then all of a sudden I was not. The red dash light that is on when the PTO is engaged was off and the PTO shaft was not turning. That tractor has a series of 3 lever/switches/knobs to fully engage the PTO. They were all...

I have a heavy duty Bush Hog brand 6 foot brush hog. This Spring I mowed down quite a few saplings and thorn trees etc. Most under an 1 inch in diameter, some up to 3 inches or so. It worked well. Today when I took it out it would barely cut 6 or 8 inch high grass. When it got...

I have a Mahindra 4510. Just recently when I want to stop the engine it will not, I have to pull the Stop T handle to get it to turn off. Any thoughts, it is really not a problem doing that but rather it worked the way it used to. Just a comment, a mouse could have been in the...

A neighbor has a L1670 for sale. It has been serviced every Fall by the Kubota dealer. Looks clean. Used to mow a 5 acre lawn, purchased new. Probably nearly 15 years old. Anything special to loo for, pros and cons and general price on such a unit? thanks

A fellow has a Kubota G2000 4 wheel steering, HST with a 54 inch mower deck and 977 hours. Unknown age, condition not abused it appears but has definitely been used. Anything one should know about the same, price, things good and what to look out for etc. to decide on...

My Mahindra 4510 started to get warm, not hot. I brought it back to the barn. Raised the hood and saw fluid all over the engine compartment. Radiator was down about 1.5 quarts on a 8 quart system. Oil was down about 2 quarts on a 8 quart system. The oil pan bolts etc...

The PTO lever on the TC40D will not move so the PTO will not engage/function. I checked and there are no sticks/debris or stones restricting movement. This is my brother's tractor and it has been outside for 5 years and the PTO not used for several. I did spray some penetrating...

I have a Mahindra 4510 built in 2004. Not that old of a machine. Someone posted that the company will no longer supply parts. Is that all parts, major engine parts, filters etc? If that is correct is there an alternate source for parts? Not that I generally need a lot but it...

My brother has a New Holland/Ford TC 40 D diesel hydrostatic tractor with a loader and an aftermarket Curtis cab. It has 2200 hours. He is thinking about selling it. Unsure of a fair price. Any ideas would be appreciated. In western Indiana if that makes any difference. Thanks

I have asked this before but here again. I have a 2004 Honda Rubicon ATV. Runs well when cold but if it gets worked harder or warmed up it loses power, growls and squeals and has no power to move especially up even a slight incline. Let it sit for 30 minutes and it is ready to go again...

I want to replace the starter switch on the 4510. I removed two phillip head screws on the dash and the gauge cluster almost releases and pulls out to give me access but the top of the cluster will not release. I cannot see what is holding it in place. Anyone have any experience or ideas...

I have a Mahindra 4510. I want to remove the gauge cluster to access the starter switch. I removed two phillip head screws and the cluster wants to come out except the top edge will not release. Anyone ever have one out or ideas? Thanks

I was operating my 4510 and stopped it. Would not start soon later. It just clicked a bit like a dead battery. As the battery was about 6 years old I got a new one. Installed it and it would still not start. The ground and connections are clean. When the key is on part of the...

I saw a used TR3 rake for sale. I have not called on it. I would use it for gravel lane leveling and perhaps some seed bed preparation in heavy sod. Any comments on those that might have used the same or is there a better alternative? Thoughts are appreciated. I would used it on...

Anyone relocate the fuel filter on the 4510 to the back to protect it from sapling damage or actually build a shield to protect it in the factory location?

I have a chance to get some concrete that is 1 foot square, with 4 pieces of 5/8 rebar in it. It would span 7 feet over a drive way to let water under. Any idea what those concrete pieces would carry in weight. There would be 9 of them but the tires would ride on just two of them.

I have a 2004 Honda Rubicon. It has a D1, D2 and ESP transmission speed. I do not drive it fast but I have steep hills. What is the best range to use. Also if I pull a disc or cultipacker behind it what range should it be in. thanks

My dealer has a sale on a number of 50 horse Kiotos. All are new with loaders. He has a DK 5010 4 wheel drive with hydrostatic for $21,500, an open tractor. He has an NX5010 with a cab and loader and hydro for $33,500. Geared tractor are $1000 less and the cab is about $7000 over...

Wondering was a cab Case Model CX70 4wd tractor with 1800 hours on it might be worth. Not sure of the year. Thanks

I have a Bush Hog brand model 306 brush cutter. It has the slip clutch. The PTO shaft has a female and male and they will not fit together fully. They only engage about 3 or 4 inches. That makes it too long to fit to the PTO stub on the tractor and even if it did I feel it would be...

I had a bolt come out of my bush hog and one blade came off. The threads are pretty mangled. I have a replacement. Any trick to replacing it by myself. I think I can get the new in and started, unsure how much torque I will need to tighten it down and how to hold the blade to do...

I can get a Woods B106 rotary mower. It is a Cat 2 set up. My Mahindra 4510 is a 45 horsepower Cat 1 tractor. I know the pins can be switched to go to Cat 1 but will the pto shaft be different and will the spacing be too wide for my Cat 1 3point attachment points. Any thoughts or is...

I am considering getting a Woods B106 rotary mower, a six foot cut. I have a Cat 1 45 horsepower tractor. The seller thought it was a Cat 2 mower. Does anyone know for sure? I could change the pins but I think the spacing off the 3 point attachment points would be too wide for my Cat...

I have a heavily cracked/broken stump jumper on my Bush Hog brand Model 502 rotary mower. It is a 5 footer. The replacement part would cost more than I paid for the mower used. Anyone know where there is a company carrying a used one or other ideas. If I cannot find one I will...

I ordered a part on Monday AM for a three point hitch damaged item. The dealer said he would have it sent directly to my house. It arrived Thursday AM. I doubt they had it in stock so I was happy with the speed. I welded the old part just in case there could be a delay. Keeping...

My Mahindra 4510 air conditioner did not cool. A dealership got it to work, recharged it as I understand. Worked well for several months and back to the same problem. Is there a way to inject a dye or a process to see where the leak occurs so this will not happen again? Thanks

I have a Mahindra 4510. The fuel filter is low on the right side of the engine and when bush hogging saplings etc they have hit the filter and damaged it twice. The connections are only pressed in and then leak. There does not seem to be a real way to shield it. ] I saw a...

I have used various type lynch pins over the years. None work too well, in the thick stuff they have come loose and that has caused more than a share of problems. The best are a circular round wire type. One spreads the coil apart and spirals it around. I however do not know the...

My 2005 Honda Rubicon runs fine when it is cold. When it gets warm it loses power. Sometimes the fan comes on and sometimes not, more often not. I think if the fan operated correctly it would not get warm. The radiator is not clogged, good antifreeze etc. I do not think any...

I have a 10 foot wide gravel lane about 2000 feet long. I have 33 and 45 horsepower tractors with 3 points, both 4 wheel drive. What is a good brand name and particular atttachment to level and keep my lane flat etc. I have front end loaders on both tractors also. Thanks

I have a 100 foot nylon tow strap. It is "flat", about 1.5 inches across. It has a small loop on each end. I would like to use it to pull out some logs in a ravine with my 45 hp tractor. I do not want to tear it up. What ideas on what I should use on the one loop end that would...

The left lower side grill on my Mahindra 4510 came loose, fell under the bush hog and got chopped up. Does anyone know where a used and/or new one might be located? I am in western Ohio. Thanks

My brother has a Case 450 bulldozer with an enclosed cab. He wants to purchase a trailer to haul it but cannot find the weight listed in the manual. Does anyone know what it might be? Thank you.

I have a 10 foot wide lane over 1700 feet long that will eventually be over 2000 feet. I have a 33 and 45 horsepower Cat 1 tractor. Would a box blade or angle blade or whatever be the best for light grading and maintaining the lane etc. Any comments, suggestions, reasons would be...

I had planted about 60 acres in the Pheasants/Quails Forever type seeding and 3 acres of pollinators (wildflowers). Some planted in the fall of 2012, some in Feb 2013. Not seeing much yet, I was told it will be June before I see most germinate. Anyone had any experience with these...

I have to put in a 2000 foot, ten feet wide lane. The gravel and trucking could run about $10,000. Is there any decent substitute? If a black top road was ground off would the asphalt give a decent base? Washer run etc. The top soil will be bulldozed out and I would like to...

I have a Mahindra 4510 tractor, 45 horse with MFWD. I am told that it is a rebadged TYM. Does anyone know the equivalent TYM it is? Thanks

I have a Mahindra 4510. It has been said it is a TYM bebadged for sale by Mahindra. Any idea what it would be in a TYM equivalent tractor. It is a cab 45 horse, MWFD tractor with a loader. Thanks

I purchased a used Kawasaki Mule 2510 4wd UTV. The specs call for 22-11 -10 tires on both the front and rear. All tires are Dunlaps, the front are that size and about 60%. The rears are new but 23-11-10. Any problem with this? I do not ride on the road or fast and the only...

I have a Mahindra 4510. The 4 wheel drive lever, although forward in 4wd, does not seem to be engaging the 4wd so it remains in 2wd. Any thoughts on the same before I take it to the repair shop? Thanks

I have a manual front wheel assist Mahindra 4510 tractor. About 45 hp. When I am in 4 wheel drive going down a hill it wants to "freewheel" and gain so much speed the brakes will not hold it and I have to put the front end loader bucket down to slow it down so it does not get out of...

I have a Mahidra 4510. The air conditioning coolant is full, dye was added and there are no leaks. The AC blows cold and the fan works but not strong. With that as a background the cab gets about 20 degrees warmer than the outside air temperature even with the AC on high. This past...

I have a Kawasaki Mule 2510 4 wheel drive. It makes a loud clang and almost lurches when it does. It almost sounds like it will break a gear off of somewhere. Any ideas. I once thought it was the bed was loose but that is not the case. The noise comes and goes but I would like to...

My brother was told his recently acquired used 260 skid loader has a high and low flow hydraulics. He needs to use it with high flow. It there a lever and location to change this? Thanks

I am posting this in several JD sites here for assistance. My brother has a 260 skidloader and was told it has high and low flow hydraulics. He needs high flow, is there a lever to change/adjust the same? Thanks

My brother has a JD 260 skid loader he got recently. He was told it has high and low flow hydraulics. If that is the case he cannot locate any lever to put it in one or the other. What he needs to oprerate needs the high flow. Any ideas/suggestions for him? Thanks

I have a Kawasaki Mule 2510 4wd UTV. It makes a loud bang at times when one is gaining speed, although still very slow. The first time it did that I thought I broke an axle or wheel. It was that loud and almost a sound like metal breaking. I actually stopped to see if there was anything...

I have a Mahindra 4510. I think TYM makes it for Mahindra. It has a TYM ignition key and the engine is made in Korea. Does anyone know what TYM is comparable to the 4510? thanks

I want to remove the doors off my 4510. It looks like I can remove a c clip and the dowel in the hinge and they will come off except for the hydraulic shock on the door. Can the ball be popped out of the socket or should the machine screw/nut that attaches it be removed. Thanks

I had my tractor worked on about an hour away. When I used it, it appears the temperature gauge was not hooked up. I do not want to reload it, an hour each way. I found two disconnected male connections but no female connections. Also two plastic covered coil springs that seem to go...

Comments about the John Deere 4520 and 400 x loader. Any cons/pros thoughts on the same. A neighbor has one for sale and was wondering if that series was as well liked/made as some of the slightly higher horsepower models. Thanks

I have a 4510. Where is it built, the engine and the front end loader and the tractor itself? thanks

My Mahindra's power steering is out because of an orbital steering valve. Anyone know of anyplace that can rebuild/repair the same. I have been advised a new unit is $600 plus labor. Just inquiring. A low hour tractor needing a clutch, pressure plate and this but then I do not know how...

I have water getting into the oil. Trying to find out from the prior owner if it ever got hot. Will be checking for head warpage. It was apart because a valve stuck and bent a push rod. That is corrected and then the leakage was discovered. It is an aftermarket head gasket. Anyone...

My power steering is not working. Does anyone know if they sell a kit to repair the pump or box? Thanks

There are some old parts manuals on ebay for sale. I know nothing about the seller, just thought some might be interested.

I have a Honda Rubicon that when it warms up loses power, has a growling noise and has difficulty getting up a hill because of the power reduction. Any ideas or thoughts. Thanks

There is a 336d for sale in Penn on ebay with no reserve. High hours and it may be tired. I think that company will also deliver around Chicago for extra. Maybe what some are looking for.

I got a good deal on over 100 sheets of 2.5 inch foam to put on the roof of my pole barn. Good if I can get it attached. If I could find 3 1/2 inch cap nails I could nail it to the nailers. I could make my own "caps" out of thin plywood and use regular nails or any special type of...

My 2004 Mahindra 4510, cab 4 wheel drive cab tractor recently barely had enough power to get up the hill while mowing. Actually the engine has plenty of power so I think it could be the clutch. It only has 1070 hours on it but I bought it used at around 900. I have not tried to adjust...

I just got a used 2510 4x4. Anything special to watch for, service etc. I also need to get a service/repair/parts manual. Anyplace special to get those from? Thanks

I have a Honda Rubicon ATV. When it warms up it loses power when attempting to climb a hill. It does reasonably well after that on the flat. I also noticed that the radiator fans are not coming on. Could that be a fuse, an electrical line disconnected, thermostat? Could the problem be...

I need to get a few parts for my Mahindra 4510. I live in Celina, Ohio. What are the nearest Mahindra parts dealers between there and Columbus? Thanks

I broke the fuel filter bowl. I could not find in my manuals the procedure to bleed the line after it is fixed. Also how much torque is the flange given when tightening?

My brother has a MF50. His transmission is "stuck" in first gear, the hi-lo works but he cannot get it out of 1st into any other gear. He changed the transmission fluid he said about 1 year ago, the manual said 27 quarts so that is what he put in. He says the manual does not show a dip...

I had my 4510 idling, the air conditioner was on. I was perhaps 50 feet away and suddenly a loud squeal/squal noise came from under the hood. I ran up and shut it down. I expected to see something caught under the belt or it almost seemed that something locked up and a belt was slipping...

Comments, pro and con, on a John Deere 260 skid loader with 2000 hours. Thanks.

Those of you that have the 260 model, pros and cons and any general comments. Looking at one with 2000 hours. Thanks

I do not know if this is the correct location for this but I wanted to say I had some dealings thru jwcinpk and they could not have been better. He and his father were real gentlemen and helped me out a great deal on a part purchase. I just wanted to thank them here and to let others know...

I just replaced the green coolant in my 2004 Mahindra 4510. I replaced it with DexCool, the orange General Motors coolant. I then read the most recent Popular Mechanics magazine and it said one should never use other than the original color as it can be hard on gaskets, water pumps etc. I...

Two questions actually. There is a grease jerk under the rubber floor mat, the front end loader column plate bolts thru the mat such that one cannot lift it far enough to access the jerk. I could use a rubber knife to slit it which would permit enough room to get to the jerk or how do you...

I admit I just took a quick look but I did not see a drain petcock on the radiator of the 4510. Where might it be or do you just loosen the lower radiator hose? My Yanmar has a block water jacket drain. Ideas/suggestions. Thanks

Two questions actually. My 4510 has a grease port under my rubber floor mat. The front end loader column bolts thru the mat and I cannot lift it far enough to access the zerk. It is thick rubber but I can cut it with a rubber knife and that should give enough lift or other ideas. The...

I have a 4510. It wants to run warm/hot when mowing. This especially occurs if any weed/thistle fuzz debris gets in front of the radiator. I have to clean it often and it does not take much for it to get hot. Anybody else have these problems and cures. The fluid is full and good. I...

Could anyone give me the email address, postal address or telephone number of Construction Equipment Parts Store in or near Humboldt, TN. I think he sells out of Ebay as dmoore4. I would like to contact him/the store and have not been able to come up with any of the above. Thanks

Can someone provide an approximate price on a Kubota B7100 4 wheel drive tractor and accessories, to be sold as a unit? The tractor has 750 hours on it, it is a diesel. No ROPS, thought to be a mid 80's tractor. Unsure if grey market or not. The unit was with a business so the paint is...

I have had someone ask me to try to bet some information on their Kubota 4 wheel drive tractor. It is believed to be a mid 80's tractor, about 18 horsepower, no ROPS, it has power steering. At this time they are trying to get a model number etc. It has a new 1846 QT front end loader by...

Does anyone have a used Honda Rubicon module/hour meter for sale and the price for a 2003? Thanks

Hi: Any idea what a very low hour (under 500) MF 40b backhoe would be worth, this is a pre-1980 model with a cab, 2 wd? Thanks Also any idea what it would weigh?

I hope I am not out of line here asking about the JD Gators on the tractor site but was hoping the JD users could help me out. My 23 year old ATV I believe is on its last legs. I am getting older and am considering a Utility Vehicle like the Gator. I have hills and sometimes snow. Tell...

Any idea of the price of a John Deere 510 backhoe, 2 wheel drive. Solid motor and hydraulics? I unfortunately do not have much more information to offer on it. Thanks

I have a Mahindra FEL 114. How does that compare in lifting, construction etc. with their FEL 112? Thanks

I have had spindle breakage problems with my 336d. I have a front end loader but do not load it heavilly, it is the factory loader. Also now a front wheel seal is leaking badly. Any of you have any similar problems or corrections. I just overhauled the motor and clutch so I do not...

I have a 4wd Mahindra 4510 cab tractor. I also have a Woods/Bush Hog 750 3pt hitch backhoe. Will this fit on my tractor and do I need a subframe or will the Woods 3 pt hitch arms handle the same. I think the tractor is about 45 horsepower, Category 1. Thanks