Search results

OK, will do. Once the winter ends, the time to get involved with a project like this diminishes as we are then outside farming.

The President of Mitsubishi Ag, is now over all of MAM. Mitsubishi owns 66% and Mahindra 33% Mitsubishi runs MAM, And, MITSUBISHI AGRICULTURAL MACHINERY https://www.mam.co.jp/english/company/company.php Mahindra was not around in 1945 in Ag, only in the steel & automobiles as...

Nice. And you are in my area too. We've had so little sn*w this year. Everyone to the south is getting slammed. -13F this morning too. ugh.

Does the RK37sc have a cleanable hydraulic filter or spin-in? Chances are, it needs to be cleaned and reused or a new spin-on filter. When using a spin-on always go for the TALLEST possible that will fit. Too small means, you will be changing it more often. Taller means, more surface...

Yanmar is up to 30% ownership of Solis now. I believe it's a win-win. Having Kukje and Yanmar global engine parts, people can find parts easier. Either Ag, heavy-machine, or Marine, one can acquire parts. Mitsubishi now owns Mahindra. Mahindra dealerships have popped up all around the...

Maybe one of these Solis too? Sonalika (Solis) Tractors holds about 11.7%[7][8] market share of the Indian tractor industry. Sonalika Group owns a 70% stake in the company while Japanese diesel engine manufacturer, Yanmar hold 30% stake stating in 2005 .[9] It was selected for the 'Champions...

I know the Log Life coolants out there today are more like water and do not have the slippery feeling between your fingers like the older coolants did. One of the failures is bearing wear mentioned at the link. Prior, I had listed those other coolants. If they are not slippery enough, then...

Depending on when the engine was made in what era, Some engines have the ID near the top, like this 3T75HL

I wonder if your machine's original engine was replaced. Near the starter should be the engine ID plate. The 3T75HA-S could be a true mountable replacement engine. In the Yanmar YM tractor series, YM250 UK and EU model. 3T75HA In the Yanmar Gray Market tractors, YM1810 3T75H...

If it breaks down, you have no Right-To-Repair it. :ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO:

Organics hold more moisture, if it's frozen it will be harder than soil.

Not certain what tractor in your listing is doing the plow work. If it's the JD970, you can use the typical PVC pipe with a long slit in it like many of us do for gravel driveways. We just rip a thin slit with a circular saw and press it onto any blade, The Nordic company takes regular PVC...

Our temps have gotten down to single digits. This past Friday we had a weird 53F as the high. The only thing to break the ground were the rippers late in the afternoon, and that was after several passes. You got to have BEEFY shanks, else the cheap ones will snap apart. - 1st pass 1-inch...

The manual is on the YTOG for free. Bummer. I could of saved you plenty of $$$. YANMAR T-LE ENGINE SERVICE MANUAL 2T72HLE 2T75HLE 2T90LE 3T72HLE 3T75HLE 3T80LE 3T90LE.pdf The LE only means the engine is used in a stationary application like a power generator or mounted on a trailer for...

You are very crafty, I like it.

PB and Gateway did somethings well in advance compared to other brands that offered the same stuff. I recall both companies on the desktops were the first out with those front cover full media port connections. Then as those two companies faded away, Dell made it common. As of today, PB is...

And most of us geeks with tractors have ones with NO-TECH. Who wants a machine with a computer, only for it to fail into limp-mode or worse. Then you have no Right-To-Repair other than the dealer. So, us geeks, having to live with tech for years, know the right answer, no tech means easy...

oh it has the beefy engine too, 4TNA78T with a turbo.

Before the PC and smaller than a mainframe systems came to be, Prime Computer Prime Computer - Wikipedia Used by so many companies for 3D legacy CAD back in the day. Ford Motor Co was the #1 user along with Aerospace and Marine. Not IBM OS nor Unix nor Linux nor PLC nor Assembly, the...

I have a contact within Valvoline. For old engine cooling systems, this is the information shared. The contact did mention the Prestone product has good corrosion protection as well. As for how the coolant change intervals are to be done, this would vary on the material makeup within the...

Older machines typically ran on the old green color formulas. The new Long Life coolants have LESS corrosion protection. The only coolants we have today to work in old engines with the full corrosion protection like the old formulas are, For Heavy Duty Diesel, only their G05 formula ...

Thank you so much!

Somewhat related to YANMAR as the Deere machines still use the Yanmar engines or kit tractors sent to the Deere assembly lines. From one of the largest online web publishers of Ag news, www.agdaily.com subscribe today and keep up-to-date . . . For big farms and small homesteads, there is...

We do have a Yanmar section on TBN, Plenty of us Gray Market owners, in fact we out number the domestic owners here. Yanmar And the Yanmar Tractor Owners Group is still alive and well after 35+ years. I bet at one time you were involved with the group. So much has changed and now we are...

New is not better. DEF, limp mode, and the computer gadgets all are EXPENSIVE to fix. Often in the $1,000s of dollars and not having the machine for weeks or several months! Your passed-downed machine is more valuable than a new one.

ditto here for H-F. LOL Likewise with Trader Joes stores being 1hr in either direction away. I can't win.

Well, the Yanmar engines are super easy to work on and very robust for longevity. Parts are easy to obtain globally no matter where you are in the world. Yanmar is heavy in both Ag and Marine. Either dealer for Ag or Marine will carry parts if needed, even 40 years out of production. With...

return back to the store in 3-days. Get the broken 3gal pancake with tank for pennies on the dollar. Now you have spare parts. (y)

You at least need to run it once or twice on propane ONLY. You do not want to do a break-in period during an emergency time. Use the oil that came with the genset for the engine. After about 30mins or so, (read manual) you can shut it down, drain the break-in oil, and then refill with a good...

BF sale had the $29 like yours with the flow regulator built in for only $14. (y) The flow regulator helps to prevent goop spots. When a compressor kicks back on and the spray gun with no regulator goes spurt, it puts a goop gob somewhere. :eek: Or, if you have a flow regulator on the output...

A little safer is an IBC tote. Remove the plastic tank, use the cage as a platform lift on your forks. Also, the IBC cage can be used as a Carry-All.

noooooooo, you don't put hot sauce down there :ROFLMAO:, you add it to the foods you eat. Read the info at the link provided.

I wish I had a Yanmar 2-wheel tractor. There are things I can not do with the compact utility tractor a 2-wheeler can do. For awhile, a company in Portland, OR and another in Wenatchee, WA imported the Yanmar 960 machines in. These turn up at estate sales and auctions on the west coast.

Want to know why BCS time with Yanmar was short lived, it's because of Kohler pulling a fast one. Read the BCS history records in the early 2000s here, the real reasons why the company totally changed, https://www.earthtools.com/pdf/Walk-behind-(ET)-History.pdf

only for mowing with a beast being more capable ???

Make your own garage metal roller picker up,

Hold down tarps outside from the storms, no problem.

ah, someone else knows this low cost trick too. Tie para-cord or ploy-bale-twine to each end, and use it as a shoulder strap ground sweeper. To mount on the mower deck, it would be like this. You would think this thing is wimpy, but think again,

And if you find the COUPON - - - expired example and their Spring BF sale each year,

I have three mounted on my mower, total cost, $12 from Harbor Freight! Works great. Plus I can quick removed to clean them off. They use it for a tool organizer, I use it as a magnet sweep bar. https://www.harborfreight.com/18-in-magnetic-tool-holder-60433.html

Oh, your machine has smaller wheels then. More like a SCUT machine.

Jaap, Glad to help. Is the German manual for the YB20 in PDF to share? Yes, I would like to see how the plow fits on the forks too.

Or just get a Yanmar 2-wheel tractor and still use the BCS attachments. https://www.tractorbynet.com/forums/threads/yanmar-mrt6dx-or-other-models.472902

I monitor the air cooled diesel engine thread too. I have like a zillion manuals for them. Some clones are better than others, but their fit/form/function is lacking a good deal to have miss timing or too much soot or air sucked into with the fuel. Clone gaskets are the worse. LOL Both...

If you ever use a PHD, ALWAYS use the top hole. If not, the attaching area will SNAP off.

This would be a great science fair project to find out how sawdust gets into a motor,

The info is in the Ford 1000 series service manual. Can be found free on the web at tractorforumDOTcom in the Resource Manager section.

Body fungus ills can be cured with organic coconut oil. Take it internally and even smear externally. Then cut back on sugars and grains for 2 weeks. As for prostate, the cure is HOT. As in cayenne hot. :cool: One study, as conducted by the American Association for Cancer Research, reports...

It is illegal to burn tires out my way. The used tires are shred into little flakes and re-purposed. The metal being steel belts, is pulled out with a magnetic field and recycled too.

It may come in one of 3 colors. Yanmar yellow is the most common. It's sibling is the Komatsu PC20 or one of the PCxx machines...

https://www.fabheavyparts.com/products/yanmar-water-pump-129327-42100-12900142005-12800142100-fit-3t75h-lb-3t75hl-tbs-3d84-3tne84-engine-fab-heavy-co

You are asking about this, FWIW, the price is a bit high, even for this old ad. I wouldn't want to see the price today, http://www.newhavenpower.com/BCSProfessional_853D_10HP_Yanmar_Diesel.html

They are free on the YTOG (y)

There are 2 parts manuals available. The original and the updated one in 2009. Should you look for parts from Yanmar, best to use the 2009 edition. If you find a parts tractor from salvage, then either edition should work. YANMAR YM186 PARTS MANUAL 0CT10-G22801.pdf YANMAR YM186 PARTS...

I got the Rigid deal of buy 2X batter and tool free on BF. The box did have a charger. (y) :giggle: I would check to see if HF does the same in the package.

This coincides with @rScotty mentioning about the Yanmar engines, to apply the thinnest sealant on the gasket as possible. And before each stage to torque down, let it rest some before the next sequence of bolt torquing had to be done. Thank you for your valuable input here.

we both arrived at the same time. I never said I arrived later.

Maybe this one? https://www.brentchalmers.com/Manuals/1981GardenWayPonyManualWM.pdf You didn't specify year or if it was the rear tine version either.

Is this the Toro or MTD or the Troy-built. :unsure:

TD shows this, not much info there either. TractorData.com Long 470 tractor engine information Download this PDF and compare, https://www.tractorbynet.com/forums/threads/mitsubishi-satoh-tractor-information-parts-and-support-updated-rev-3-21.440041

Still doesn't say much of anything. What is the engine ID plate state? Is it a K3x or K4x or SLx or Lxxxx series engine???

Not seeing his red flag on the back worries me. :LOL:

It would be a great help knowing what Mitsubishi engine is in your machine. Otherwise, I can't even make a comment here.

I just don't understand why people have no common sense of the term RIGHT OF WAY. The meaning should be drilled into everyone. I had a guy cut me off, he got out mad, saying he was the next person at the 4-way stop, not me. I asked him if there was such a thing as a LEFT OF WAY right for any...

Time flies. LOL JD750 . . .

You should of went by the Yanmar engine service manual. It is very possible to save the block. Especially since the damage is on the very end. This is a positive for you. You can do this just fine with the block on the tractor too. Just mask off the other areas. How to repair a casted...

Its not my neighborhood only, its all across rural America and Canada. Do not ignore the facts out there. Read up on these issues and become aware. You could save young lives.

Lots of child trafficking are with black SUVs and no lights to keep literally hidden on the rural roadways. Their movements are often at night like this. How they know where the road is? They are using night vision devices. Much of the time these people are heavily armed too. If you did...

I've said nothing about a DEALER. I gave the manufacture link of Steiner who made your stump cutter. At that link, call their number. It is the FACTORY, not a dealer. Direct number for Steiner products, Customer Service: (920) 699-2000 You have to poke around the site to find the contact...

My neighbor does to the south of me with a 1980's CASE. No GPS or anything like that. https://aschefarms.wixsite.com/mysite

5,500-lbs capacity https://www.amazon.com/Pallet-Jack-5500-Lb-Capacity-Truck/dp/B018ANY73O

Did you call the phone number on the website then? They will not post s/n and years made on their website. You have to call their customer service or parts department.

There are plenty of people who have converted Cub Cadets into forklifts.

Here is a rebuilt one listed on 20-wheels. A John Deere. My neighbor has an 8N and a small wheel-roller too. Be sure to find a machine that does STONE. Not all can do stone. In the 20-wheels site, do a search on WHEEL ROLLER and see if something is near you. Galion 3 Wheel Asphalt/stone...

This is correct.

I gave you the manufacture link, they would have the full records of what they made. :giggle:

Why not reach out to the company... https://steinerturf.com

What I find interesting is, they use the Dana 60 differential, one of the most widely popular and copied diffs in history. So why so much money for these retro truck frames is beyond me. I mean, even AMC back in the day used them as the cost was so inexpensive to make. Sure it's one of the...

:ROFLMAO: :ROFLMAO: :ROFLMAO: When I read the subject line I first thought, who would want to have one on rail-road tracks.

:( Bummer no RAM nor Rampage frames. Had high hopes, but found nothing. Ouch, the pricing is higher than finding a restored complete truck from the ground up.

I've seem Fords doing the same thing as well.

For a YANMAR, this works just perfectly! https://www.harborfreight.com/15-watt-solar-battery-maintainer-64251.html

What happens when one engine stops and the others are running? You would need to stop and fix things. Even running out of fuel can vary between each machine. Plus very expensive to fuel up all those separate engines. Overall, not a practical solution. This is way better!

Is this with fuel injection or carburetors. My reply was for smaller engines on gasoline and carburetors. Typically for vehicle gas engines pre-2001, the carburetors and throttle bodies do not do so well on 10% ethanol. Frequent cleaning and replacement was common. Those old throttle...

I had a hunch from your earlier post of the bolts not looking so concentric. When installing new helicoils into the 40 year old block, use Loctite 2620. Follow these steps, read them carefully. A clean work area is a must. How to Install a Helicoil That Won’t Retract Talk it over with your...

HA HA HA HA. When can farmers go BACK to reliable tractors and farming! Dump those computerized gadgets of demon-possession. These new tractors have more electrical wire bundles than my early 2000s truck. Tractors need to be following the KISS principles. A useful machine, not some broken...

You perfectly announced the ethanol elephant in the room. You are 100% correct. It's not so much the water being an issue in gasoline, it's the ethanol. Now if we were taking diesel, water is the big no-no. We have 2 stations in the big city with no ethanol. Price is 55-cents more per...

Я бы, как американец на российском тракторном форуме Fermer.ru, больше боялся американского правительства. Модераторы на fermer.ru добрые и отзывчивые. I would be more afraid as an American on the Russian tractor forum of fermer.ru by the American government. The moderators are kind and...

What I don't understand is why the battery with exposed terminals are right between the legs of the operator fully uncovered. I know Yanmar has issues with the safety of the gray market machines, but why did they do this? And yes, no ROPS nor seat-belt. These are Americans in the image, not...

If you are looking at diesel fuel to maintain for periods of time in the tractors or in storage tanks, then Seafoam is the answer. This was it's original use.

Вы правы. Китайские запчасти стоят недорого.Я также на fermer.ru Запчасти Yanmar поставляются из Вьетнама в Китай и Россию.

Looking to see if anyone bought one or had one. Vintage 1992 made. Someone owned this in the USA back in 2012. https://www.mytractorforum.com/threads/yanmar-dozer-y-9d.232582

That's when I hit you with the LED light bar on my roof rack of 33,000 lumens. :p

I took my DWs SUV for ADDED window tinting due to her complaints of LED trucks and other bright LEDs vehicles are running behind her. It has helped her a great deal. The window tinting companies are now making money hand-over-fist and requires a scheduled appointment 1-month in advance due to...

I love that channel. The very reason I got the Rigid angle grinder with the 6Ah battery.

Menards had the Bobcat palm rechargeable LED USB on a Black Friday sale of $1.99 each. Made by KunHe. https://www.amazon.com/KunHe-Flashlight-Lantern-rechargeable-flashlights/dp/B07X7Q586V/ref=asc_df_B07X7Q586V A super buy. I'm so sick of AAA and AA batteries and their cost. Recharging...

Shhhh, but see attached. There are plenty of manuals for your machine on the TractorForum(dot)com.

Easier to run a jumper wire than to program them to come on all the time. I've done this on the RAM 2500. Very effective. Also changed the fogs to LEDs, not the headlamps. I hate the new RAMs and Chevy trucks with LEDs due to blinding on coming vehicles. When a truck is towing, the back...

I recall the 2019 AAA report stating the most hit and accident prone vehicle color is B-L-A-C-K. It's not IF your black vehicle will be in an accident, it's a matter of time when it does.

Should you need to remove the ROPS, you will need to first take of BOTH rear fenders. The YM2500 and my YM2610 share the same CP Group-7 ROPS. So does the Deere JD850, JD950, and the like. The same rear wheels on the YM2500 are on the YM2610 and YM2620. They are HEAVY. If you have an...

Menards by us are usually 1/2 the price of HF for buckets.

You have PM.

I have the metric set for the impacts. I've slammed them in the top tier Milwaukee, Dewalt and Rigid guns multiple times over. They keep performing flawlessly!

what ... what ... what !

NICE. I grabbed a 2500-lbs on a BF deal a few years back for $44. Good to see you got a deal very close to mine. I can mount to the back or the front too. Just grab the mounting plate for a few $ more.

B I N G O Thank you Rural King. Round 55W full sealed beam, https://www.ruralking.com/post-mount-55-watt-5-round-light-with-rubber-housing-retail-clam

Ah ha, Good for Rural King. They has the square type for the F/FX, KE, RS, and other series Yanmar Deere machines, 55W halogen too. (y) https://www.ruralking.com/4-x-6-55w-rectangular-post-mounted-utility-ag-light-trapezoid-beam Product Features: Utility/Ag light with heavy duty plastic...

And HF has moved to Dual Fuel too. An awesome move on their part! I prefer propane over gasoline. If the genset was only used on propane, you can go years between a runtime without needing to do regular maintenance runs like gasoline. My last maintenance run was 4 years later on the 9,800W...

@KubotainNH replied in the HF tools that are good, something very close and the price is very reasonable. The only difference is, 55W is now 35W in light output. Still, 35W would cover everything one would need in a rear post mount work light as it's still brighter than a vehicles' reverse...

Oh my, thanks soooooo much! It is similar. just 35W in a 4411 sealed beam. I recall these on old Jeeps and old Japanese import cars of the late 70s into the 80s. And the price is REASONABLE too, just like HF !

@Muhammad Seems Google and StartPage search engines have noticed the database is functional. I recently had to do an inquiry into a Yanmar FX32D with a locked engine and how to tow the tractor correctly and safely out of a field acres out from a highway. The search engines dropped me here...

I went to all 4 stores, nothing. 2hr away to one that does show some stock.

Nope, will not work.

HF has now discontinued the tractor rear work light. 55W H3 Halogen automotive bulb. This was a great buy for anyone from Ford 2N up to modern tractors. Easy rear fender mounting style. It's been replaced by an LED type costing 3X the price. I can not use it due to LEDs tend to spook the...

Do you have the Yanmar/Deere TM1192 Technical Service Manual? The last chapters cover all this. Your image is a match to the Yanmar OE item-11.

Look over these two sections in the YM276 Service Manual.

I think if you build up too much pressure in the Yanmar, it will go off like a Hydrogen bomb. :eek::eek::eek: :LOL: OK, I'm be serious now. After the BLACK goo was drained, did you RINSE out the entire hydraulics with DIESEL? With the diesel in there, work the tractor thru all gears and...

Do you have the, YANMAR YM2210 PARTS MANUAL - EARLY MODEL.pdf and YANMAR YM2210 PARTS MANUAL NPC-9013.pdf to review the parts diagrams? From there, you should be able to rebuild it using the, YANMAR YM276 SERVICE MANUAL 3T84HA.pdf All found on the YTOG for free.

Not reliable for the production years and other details on Gray Market machines.

From the Yanmar official document it is more of a mystery. The YM2500 should follow the YM2610 for production years. Yet, in the Yanmar document, it is not mentioned. The Deere JD850/JD950 and the JD1050 were one of the longer production runs. Here you can see the JD850 made at the same...

Seems to be a discontinued item now. It's a great work light or can be used as the side front headlights on the older Tree Frog YM1300 and YM1500 or YM1700 and YM2000 machines. https://www.harborfreight.com/12-volt-halogen-vehicle-work-light-93904.html Fits inside the grill YM1300 OR...

Be certain to shop-vac all the metal crud out of those cylinders too. Then the carbon removed with a simple cleaning solvent mopped up with a non-abrasive towel or rag. Lastly, a thin coating of lite oil around the edge of the piston to the wall, all the way around. Remington oil (REM oil)...

It leaves you to the most primitive structure then, cinder blocks. Then using masonry paint . . .

If he's retired now in MS, the thin sheds will blow away like dust in the 1st hurricane. The reason why I suggested the shipping container.

If you were going for 8x20 sized sheds, then one of the cost effective ways and still have steel walls is a short sea container. They do have 8x10, but rare in many areas. These are $1,000 to $1,200. When you build your own, the materials and time cost you much more. The 8x20 are the most...

I had to add a clean-out at the end of a 35FT run. This was the kitchen sink. After 2 years of clogs and messing around, we had to remove carefully the pipe out of a finished basement, then realized the pipe vent going up to the roof was clogged by a birds nest that fell in the air vent of the...

A real "semi" emergency. :D

Swing Wide It's a Friggen Trailer.

The industry standard for color matching paint is the RAL number. RAL is used globally. When you walk into the stores to find the base paint can/jug, they squirt the appropriate color dyes in, then on the shaker all of this gets mixed. To get to the right balance, the RAL number is used. It...

Looks like you need to reach out to your local Yanmar dealer.

Do you have any Mitsubishi or general Forklift repair shops in your area? If so, take the wet disk brake in and match it up. Here is the Mitsubishi Forklift setup.

Vintage U-haul and Kubota orange-red and black is the same stuff. I talked with a retired Kubota Gray Market importer. He stated that is all they ever re-painted the Kubota machines with. Buying Kubota orange paint labeled as such is way to pricey. The color codes below for RAL is for...

After a few posts, you can post an image of the plate. We can help you then. Many of the Japan brand tractors even shared parts. David Brown Iseki

Working on the next revision. Adding in the Satoh ST machines. It is grueling since the info is sparse all across the web. I do have some of the engine manuals to aid in those details too. Trying to figure out the David Brown equals as well. hmmm ANYONE who has a Satoh or Mitsubishi...

@Muhammad I also assist with the legacy Satoh-Mitsubishi machines. Right now, I'm looking at the Satoh-David Brown history connection made machines. Primarily the S350 and S550 with the DST90 engine. This member uploaded images of the Satoh S500. I can not locate them on TBN...

I would agree. SOME eState sales are worth it to poke around. I try t avoid the ones in a residential area, mostly furniture and used China. When the place is on an acre or more, then the good stuff is typically found. I picked up a new, never used tractor seat for a mere $15. And it has...

Dang, it is cheap! If the hay guys around here saw that, the bidding would have been a war. So many round bales can fit on that frame of a trailer for delivery use.

My co-worker EE retired up here and moved to Portugal last year. He is near the coast. Strange story, he is an MG car nut. His car came from the UK. spent a few decades here, now it was shipped over there. :D

I hope he has a YM126. It's a very small SCUT and easy to lift. About the size of a Wheel Horse GT.

He could also mean it's a YM2610 or a YM2620 or a YM126 or a YM276. No idea what YM model and type of brakes to provide detailed assistance.

Your bulb is a P15D-3 Stanley socket. or the Deere p/n CH15208 LED https://www.amazon.com/Ruiandsion-P15D-25-3-6V-24V-Motorcycle-Headlight/dp/B08NG6SRB4/ref=sr_1_3 LED https://www.amazon.com/Ruiandsion-P15D-25-3-Motorcycle-Headlight-Replacement/dp/B0C4TC6GGG/ref=sr_1_7 or spend more money...

Check out the link then. There is an image showing dimensions and even folded.

If you want the MOST COMFORTABLE seat in the industry, it is a ProBax Orthopedic https://tempress.com/store/ProBax-Orthopedic-Limited-Edition-Boat-Seat-Charcoal-Yellow-Carbon-p574996255 This is the only one they have with yellow in it. WHY do the NEWER tractor seats fail and not last 40...

Then how about . . . Highly quality PVC faux leather. Made of firm steel plate and High rebound polyurethane foam. All parts of the product have undergone rigorous durability tests. High temperature resistant and water proof. The universal tractor seat including Built-In Operator Presence...

NORTHERN TOOL https://www.northerntool.com/products/k-m-uni-pro-hinged-bucket-seat-yellow-model-8280-47818 https://www.northerntool.com/products/k-m-uni-pro-uni-pro-km-225-bucket-seat-model-8772-6271725 And the High Back type...

Have no idea what you posted. You will need to use a different browser to post. Those strange things took over.

Your JD850 has the same engine as my Yanmar YM2610. Did you look all of this up in the Deere TM1192 Technical Service Manual yet?

I only notice this problem when using a private VPN outside the USA visiting TBN. I would have the Captcha and FF warning of a bad site, do I want to continue. I then check the VPN, yep, it defaulted again to the Netherlands. Flip it to USA and all works again.

I have had issues in the past with the regular FireFox browser on this site and others. This is called the Rapid Release right out of Beta testing. Most people use this and yes, there are still unresolved bugs and errors. Then I switched over to FireFox ESR. From the time of the switch till...

Please give a heads up when you need the assistance cleanup help in the next phase of this project.

Yet, their data does have errors too. I've not found any of the tractor info sites to be spot on for every make and model.

:ROFLMAO: (y) They would try to sell you a sharpening kit. TSC BOSS here is $22 for a 50-lbs bag. Menards BOSS here is $18 for a 50-lbs bag. Also, their BOSS has less chaff debris in it.

Thank you so, so, so, so, much for sharing! If you need manuals or deep questions answered to keep the YM155D going, the YTOG has a large community of owners, parts suppliers, free manuals, and additional resources. Also see attached. It's the only complete YQM doc we have. Not found a...

And off to work I go-o-o-o-o-o-o-o-o-o

Just think, you are saving the environment by not letting a drop of toxic washer fluid leave the reservoir.

Is it possible Yanmar has learned the ropes working with TYM and Rural King stores? And Rural King stores do have tractor repair techs on site too. Will we see TSC offering tractor repairs by certified techs trained by Yanmar at the stores? Rural King Farm stores with RK tractors made jointly...

The new Yanmar engines are already EPA Tier-IV level or better.

I had already posted the wiring diagrams for you. Scroll back in the messages.

19Hwy, 2001 RAM 2500 5.2L/318 Magnum engine. Diff 3.92:1, love the truck but it rusted to never never land.

ok, we'll just have to live with it. LOL Maybe it's the browser on your phone? Try switching to a different one? ... no idea really. I use a computer. I don't like using the phone for internet. Tiny screen and my fingers are way too big for the tiny touch pad to punch out the words. When...

You need to use the forums with a computer. Your phone is doing very strange things here. LOL :ROFLMAO: 🤪:giggle:

Return the light to the eBay seller. Run out to Harbor Freight and get this. Then the install is PAINLESS. https://www.tractorbynet.com/forums/threads/headlamps-from-p15d-25-incandescent-to-halogens.459191/#post-6401831

Plan ideal-1 would work IF you will string more poles across. Do not use two and call it a day like this guy did. I would do 4, here is 3. Masonry is ideal at each end. The best bridges are semi-trailer frames. Cost is sky high. Or find on CraigsList old mobile homes that need...

see the simple wire diagram above. Just cap off the LOW beam wire.

Regardless of the wire color, do you have a volt meter? We can sleuth the hot to run to the switch. Then the switch to the bulb. The ground then goes to the OTHER side of the bulb. Then run the ground to the chassis. That should be it. (y)

Cap off the green wire. Only use HIGH. Is the switch in the shell wired to the light wires to the bulb?

@DarkBlack You own an American brand, not a Japan brand tractor. These older Japan tractors are made to JIS standards, not even close to SAE. The oil ports and flow are much narrower and the diesels engine are not like any other from that time period 40 years ago. I've had diesel mechanics...

And the YM2610 basically has the same schematic. I had translated it into English.

I thought Steve shared my link on how to wire this already? The one wire is HOT and goes to a switch, then the fuse box to the + on the battery. The ground just gets grounded to the fender or run it down to the chassis. This is the schematic for your YM2500. The green marking is an on/off switch.

Hi Travis, Good to see you here on TBN as well. Yes, we have touched on the oil topic here on TBN a bunch of times. Since you are down south, really down south, I bet you can get by with 10W30 all 3 seasons, then SAE30 for the hot summer. The Yanmar OE engine oil is, Pennzoil...

To save time, I already dove into the headlamp switch. In extreme detail. https://www.tractorbynet.com/forums/threads/headlamps-flickering-then-quit-working-finally-solved.470830

Jeep Commander with the 5.7L HEMI. You could see fine over the steering wheel and have the muscle to tow like a RAM 2500.

Oh, now I see why you need a new horn button. I love the dash and controls your machine has. Do you need any of the engine manuals?

oh, you avatar only mentioned the Deere D155, so I assumed you just got the YM2002D

Is the YM2002D a new machine for you?

You can reach out to Fredricks for the Yanmar OE part or get this online anywhere for the horn switch. Or get something nicer like the newer Yanmar machines, https://www.amazon.com/Twidec-Momentary-Stainless-Pre-wiring-Modification/dp/B08KSS8TXW/ref=pd_day0_d_sccl_1_6/144-7914853-8591505

Are they the 53 bulbs found in the lamp gauge? Then yes, you can go LED, 53, 182, 363, 1445 LED Replacement Indicator Bulb 12VDC

You can sort-of do that today. - Take a lead-acid battery and drain it - Fill with warm Coke Cola, 80F ideally and then cap it off - Let it sit for about 36 to 48 hours in a warm place - Every now and then, come by and shake it - Drain the Coke out - Fill with distilled or RO water. Shake it...

Could we also tag a thread to multiple models? For example, a BH can fit several models. Likewise a loader. It's all based on the common frame size the OE uses as a platform.

We need the mini wheel loaders. They have Yanmar engines and use the same front end loader buckets. These mini wheel loaders are the size of our compact tractors, not the huge size like Forestry. Some farmers use them to scoop up grains too. Yanmar V1, V2, V3, V4 and V5 match the SCUT to...

For small hard to find parts, yes, Grainger, McMaster-Carr, Mouser, US Plastics, ULINE, etc. Once exhausted, turn to the 3D printing community for help. 3D printing is taking over where dealer-stealers fail to provide. And with the last 4 years of a broken supply chain, it's become more...

Upon looking at the Yanmar section, there are tractors, wheel-loaders, excavators, field planter machines, Yanmar industrial mining equipment, two-wheel tractors and 1 sail boat. LOL In a similar way, the Kubota brand has the same undertaking. There is also the sub-thread for the Yanmar...

Sure drop a PM anytime you have a moment.

BTW, when the database disappeared, I created this thread on TBN for all of the Yanmar vintage machines in the YM series. Wow, what was I thinking, it was a huge undertaking. Took several months to find data, arrange it all and proof read. Nothing else on the internet has this complete...

Is there a way to TAG those to lets say a tractor brand and the tractor series. I know not all tractor brands use a series, just numbers. So if a posting deals with tractor weights for a certain series, people can find the info for all those models. Likewise for lights and common gauges...

Group 24F is taller 750CCA and peak 975CCA. You would need to ensure the cables reach. This is what I have in my YM2610 right now. Ideally, you need to bring the battery back for any warranty issues. The group-65 is very pricey to replace. If outside of warranty, you would need a battery...

oh, as expected, the migration of the old database to the new has all of the messed up tractor models in the Yanmar section. Yanmar models have a 2 or 3 letter prefix to a model. Some omit this. Some of the model names are just YANMARXXXX as a tractor model. This doesn't even exist...

There is also a YM1700B and YM1700BD. There are a few YM1700S machines as well. So, I would expect you to snag all the manuals I had mentioned since it's unknown what you have officially. The 1st generation of the YM1700 looked like this in either Tree Frog green or Apple Red.

ZOINKS, looking at your other videos of the past few days, there are real idiots on your highways out there. WOW. o_O Ha, now I have my brother watching your YT vids on the ham radios. LOL

The YM1700 came in more than 1 flavor. Grab all of the manuals relating to the model. YANMAR YM1700 YM2000 1ST EDITION PARTS MANUAL NPC-9008.pdf YANMAR YM1700 YM2000 PARTS MANUAL.pdf YANMAR YM1700A YM2000AA PARTS MANUAL NPC-9011.pdf and the 2TR engine manual, YANMAR ENGINE 2TR15 2TR16 2TR17...

Wish you were near me to do the laser cleaning. And I noticed the BLUE wrapping to prevent the laser from accidentally vaporizing the wire harness. Seems you got a working knowledge on this. My prior employer has a large vented bay for this type of work. Just make sure you wear a face mask...

All the manuals you would need are easily found on the YTOG for free.