Search results

Purchased this a few weeks back preowned and do not have the manuals to the tractor. In the last week the tractor (Max 22 HST) has started leaking at the quick connect connections located at the control lever of the front end loader. I have tightened everything, but the light leaking still...

Need to do some light dirt work around our place, only 3 acres and could do it by hand, but at age 65 I have learned to work smarter not harder. I have come across a 2014 MAX22 HST with a FEL and 4' box blade sporting 35 hours on the meter. From the photos it looks new, with the exception of...

Little quick history and then I hope someone can help me out with how to correct this problem As stated it is a Cub M50S with the Kohler 23 motor. It was running fine but I noticed the last time I parked it in the garage it was leaving an oil trail behind it and a small puddle once parked. So...

I need to replace the keyed Ignition Switch on my 4005 tractor, this would be the same switch as used on most Mahindra tractors. The local dealer does not have this in stock. Has any ever replaced this switch with one of the basic car ignition switches from your local auto parts store? Or...

I just picked up a Befco Brand flail mower, it is 72". Can anyone tell me on the quality ladder where Befco products rank? High, Low, or middle of the road? Any information appreciated. thanks Jon

Came across a Mahindra tractor that has been sitting in a barn for the last 3 years. It is a 4005DI, 40 HP with 203 hours on the meter. Comes with 3 years worth of dirt, dust and a dead battery. We jumped it off and it fired right up, runs good. I have dealt a price of $5,500, what do you...

Does anyone have a cross reference number for the fuel filter and maybe the hydrolic filter for the 3505 tractors to what the Wix filter replacement would be? Thanks in advance, Jon

Tell me I don't need it. In truth I guess I know it. But if you could pick up a new Jinma 284LE for less than $5,000 would it not be worth the money? I had a little 22HP Jinma and it was a good tractor, however I replaced it with a Mahindra 35HP with 2 wheel drive. I am very, very pleased...

Found this while crusing Ebay the other nite. It is an old body style 35 HP 2WD Mahindra. This is kind of........ correction is a bare bones tractor, but runs sweet as a sewing machine (or at least mine does). Anyway, I have no connection to this auction other than placing a few bids on it...

My E350 DI didn't come with a canopy, I came across these on Ebay and was wondering if the price looked about right, or better than right. Has anyone had any dealings with this company or imput? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=11756&item=3870756177&rd=1&ssPageName=WDVW...

This is not meant as a classified ad here in the discussion side of the site. My question is, with Ebay fees ever rising, where are some other sites or areas of good exposure to list for selling a tractor? Or is Ebay the way to go? I have checked into the Classified section on this site, but...

Finally made it to Baton Rouge, LA to pick up the Mahindra E350 DI, that I bought. Well worth the 1,000 mile round trip. These are such impressive sweet little tractors. Basic, strong, well built, sweet sounding machines. Now if it would only quit raining here in Texas long enough to put her...

Picking up another tractor this weekend. Will be selling my Jinma 204 with FEL. The FEL is not a Koyker, but is one of the Chinese loaders. The tractor is in great condition with 152 hours on it. What do you think in real world US Dollars I can expect for her. I am located in the DFW area of...

Is there no limit to what Jinma builds and what the tractors are designed to do. Check out this snowblower attachment offered on Ebay. Not much use here in Texas but it may be of interest to some of you more to the north. Says no reserve and started at $1.00...

This seems to be the little tractor that could. Everything I have thrown at it, it tackles. Can a 204 move round bales of hay and then stack them two high on a flatbed trailer. You bet it can. Check it out http://community.webshots.com/user/jonrjen

Post deleted by jonrjen

Been very pleased with my little 204 Jinma. But I came across a deal and just have to give it a try. A 35 HP, two year old Mahindra 2WD. It came with a 5' King Kutter deck, 5' tandem disc, 5' Mohawk box blade, rear boom pole, post hole digger and a 18' pipe rail trailer for $7500. Tractor...

I am getting ready to purchase a Mahindra E-350 DI tractor. It has 100 hours on it runs and looks great, also comes with a 5' shredding deck, 5'box blade, 5' tandem disc, rear boom pole, post hole digger and an 18' pipe top rail trailer. Target price $7500. Good deal or?

Where is a good place to purchase a tire tube for the front tire of a 204 Jinma, 6.00X12. Any price guide line ideas? Any idea how tough it is going to be to get the tire off the rim? Thanks

Internal over-running clutch Can someone explain how this set up works? Is this like a live PTO, ground driven PTO, a two stage PTO? Can it be used for the purpose of use of a Post Hole Digger? Thanks in advance.

I know it is not a Chinese tractor, but I have owned it for a number of years. Way back before the gray market trend ever started. I figured not many of you may have ever seen a work horse beast like this, so I thought I would share what she looked like before she moves on to a new owner...

This person deals alot on Ebay, does anyone know anything about him or have had dealings with them?

On the 284 4x4 Jinma, with the shuttle shift, I know you loose the creeper grearing, but how may different gears do you have? Does it become a 6 speed or a 9 speed? Thanks

Ok, as a few of you know, I have been on the fence about trading up from my little Jinma 204 to a Jinma 284. A number of you told me I most likely wouldn't notice any difference in the power, there for the cost difference wouldn't be worth the cash difference. Also no one seemed to know if the...

OK, I know somewhere, buried deep beyond the search function I preformed, someone has posted the NAPA parts numbers for the oil, fuel filters ot fit the 204 Jennie. Can someone show me the way? Thanks in advance Jon

This is by far the best forum on Chinese Tractors I have found, But are there any others out in cyberland that are worth looking into? I am sure there must be another good source of information worth reading if only for the knowledge point of view. Care to share any?

What would be the largest PTO finish mower be that a 204 could handle? I have seen them in the 5', 6' and 7' range. Also for those of you who have or do use them, do they do a nice job? Does it look as if it were mowed with a lawn tractor or mowing deck? Thanks Jon

Ok, can someone or a few of you answer a few questions for me? Seems the more I read, the more confused I become. I have a Jinma 204, 2 cyl. As I read through the post I am aware that most of the tractors in this area are for the most part Jinmas that have been rebadged with other names. Yet...

I currently have a Jinma 204 with a FEL, I have been pleased with it so far. I am wondering if it would be worth upgrading and purchase a Jinma 284. Can anyone tell me if the power difference is noticeable? Will my FEL off of the 204 transfer to a 284? Are the frames the same or is the 284...