Search results

Thank you for all of this....great advice It would be spring of 25

Not sure if this is the right forum...planning to move soon, have tractor and a number of implements with it. Easier to sell as a package or item by item??? I was hoping to find someone looking for a package deal but that may be too much to ask for. Any advice appreciated.

Im basically cutting a hay field, lots of thick weeds etc...no brush I think it is way too heavy for a finish mower... how about the old fashioned sickle bar

Id say you hit the nail on the head... you said it all. THANK YOU that is exactly what is happening.

deck is level and not flucuating.... i think im expecting too much out of it. I was thinking flail mower as i know they do a cleaner cut. THANKS FOR ALL of this

Yes sir...i did that when i mounted the mower to the tractor on a nice flat surface.... it lifts and drops down perfectly even.

Any suggestions as to what manufacturer has the best rotary cutter?? I have a Kodiak 5' heavy duty cutter and no matter what i do, i cannot get a full width clean low cut. One have looks good, the other half looks all stringy and leaves hay standing. I have changed blades, made sure only...

as a matter of fact i did twist that torsion bar....heated it up and got it as straight as i could. Might need another looksee thanks for that

great explanation...thanks much

hi folks, gravelman back with update on B2650 Kubota 2016 model. If you recall it started shutting down instantly when i applied the brake and SET THE BRAKE hold lever. I took the cowl off the dash, there is a safety switch that the brake hold lever engages... as soon as that happens the 5...

ok on all this...it is off by just a little bit...might just leave it alone, i could make things worse.

ok on all these...as always..THANK YOU ALL

on my Kubota B2650 the bucket is not sitting flat...one side up very slightly Im thinking bucket arms could have been twisted with too much pressure on one side.. Is there a little secret out there to fix...maybe try lifting the other way?? Or do i have to remove the pistons, bucket etc and...

update... my tractor has Operator Presence Control system (OPC) in other words safety shut offs. Anyhow, that 5 amp fuse was blown for that system....and it blew after applying the parking brake. Have not gone looking yet for where a wire is being scuffed or what is causing the fuse to go...

Yes, i will, reporting on these things helps us all. As we all know, there will be a "next time" too.

Battery is fine...all lights , heater, ac work fine. I checked the connections, all clean and tight. Im convinced it is electrical and a breaker or fuse.

i came to a dead end as i am not a mechanic...i have a service company coming this week. Fingers crossed. I also don't think it can be towed??? Maybe a short pull on a flatbed if they need to bring it to the shop Thanks for all the suggestions and you are right...i have had very few...

ok on that... i got no dashboard lights or indicators... that has never happened before

all switches seem to be fine....no cut wires, no pto on, hd in neutral etc. i have had safety switch problems in the past but the dash board sill lit up , dash board does NOT light up now. Just the little red light for ignition and glow plug if i move to that. I hear no clicking, nothing...

WILL DO THAT...thanks... and will report back

battery connections are tight, good thought tho

My Kubota B2650, 2016 year suddenly shut down while driving along. Still have ignition redlight and glow plug light on dash, nothing else lights up I checked fuses and as many connections as ii could see/reach, all look ok. Will not turn over either. Any suggestions?? No i am not a...

all good info and i thank you.

understood...thanks for all that. My blades are NOT flat...and cannot possibly be installed incorrectly , they would not rotate at all

it would be way too much work to sharpen the other side... no picture..but just imagine a blade with sharp side and then just the opposite.

ok will do that

im looking for someone local that might have a mower they could use these on. Thanks for the tip too..

after market... no number match..

on my particular mower it is impossible to install blades upside down... safety feature. The blades are not flat.

You did not read my post carefully , the sharpening is just the opposite of the blades i took off... It is impossible to put the blades on upside down....thanks Workinonit....you get it.

Ok here is a new on on me... got a new set of blades for my Kodiak 5 foot brush hog... without giving it a second thought, pulled off the old blades and installed new one. Went to cut and they did NOt cut. Compared the new with the old and the new blade had the sharpened side just the...

where would be the best place to buy a new wheel and R-4 tire for my 2016 B2650 Kubota 7-12 ??? thanks

ok on that...thanks everyone.

They are R 4's

all set...tire pressure was below. I know it is not corrosive liquid and i agree..i hate that stuff...give me a weight box thank you all

Hi folks, gravelman here, i have a 2016 Kubota 2650 i notice the fluid in the rear tires seems to be leaking out at rims edge, not alot but now and then. I thought one tire was getting soft but it is not down. Is this something i need to be concerned about??? I hope the ballast is not...

ok on all this..THANKS ALL OF U rear tires are NOT loaded

ok will do...thank you very much

one more question for you all, owner wants to put snow chains on Branson 1905H, there is not too much clearance between tire and framework. Does anyone know of a spacer that may be available to push out wheel and inch or two. Thanks much I tried to contact dealer in NH, no luck yet.

hi folks, gravelman here, i have a friend with a Branson 1905H tractor, small machine , like subcompact. He wants to put snow chains on and there is not too much clearance Does anyone know if they make a spacer that could be used to push out the wheel an inch or so?? thanks much

That is a great idea...THANK YOU VERY MUCH

i saw a Branson 1905h tractor, the rear wheel bolt pattern is 3 bolts into the wheel frame and two studs sticking out of the wheel frame. Does anyone know why that is??? never saw that before. Also, has anyone used those wire rope snow chains on turf tires?? just wondering how they work.

ok on this..i will check both..thank you

i have a set of St Pierre roller snow chains on turf tires...a small tractor. They continue to twist and will not stay in place. Tighteners are used but they are designed to roll so getting them too tight is not good. Any suggestions or others that may have encountered this thanks much

thank you

that sounds great...im not a welder or fabricator so im really intererested in a bucket all ready to go thanks tho, great idea

gravelman here...i have a Kubota B2650.. 5 foot bucket. Im wanting a wider bucket for snow removal, NO DIRT WORK. Maybe 6 foot or 7, no bigger. Quick attach , any recommendations out there ? thanks

yes, you can replace the cutting edge easily

THAT is an excellent question... you are totally correct. almost all of them are the same. you can get bearings at an auto parts store.

ok great idea..thanks much

Im trying to sell a heavy duty Inland SA73 snowblower and some people tell me parts are not available. Whites Farm Supply in NY has parts for same. Also, most of thes snowblowers are very very indentical. If anyone knows of another parts outlet id appreciate it. thanks

that helps immensely.... im guessing it is on the heavy side of 700lbs...very rugged heavy machine. I had it on a Mahindra.. 55 hp machine

im just wondering how much the blower weighs... it has nothing to do with my tractor.

Hi folks...gravelman here, can someone please tell me the weight of an Inland SA 73 snowblower, has hydraulic chute control. thanks

ok now i am getting a better picture...i could not imagine that much so fast. Also, everything is so packed under the tank it is difficult to see much less get at things..arrrrrrrrrrrrrrrhhhhhhhh

No new news yet but i would think if it was a return line there would be just a small amount of leakage??? This leak i have is quite large, almost running out as soon as i start engine. Will know more next week

all very helpful and much appreciated. yes, it is a B2650 thank you

Ok i will look into that THANK YOU VERY MUCH

ok im not familiar with "return line" what role does that play?? keep in mind, im no mechanic but WILLING TO LISTEN

Hi all, gravelman here.. my Kubota 2650, 2016 year is leaking fuel somewhere under the tank. ONLY when running. Cannot find the source despite close inspection. Took to repair shop. It is a significant leak also. Anyone out there with some possibilities?? Don't know when they can get...

Ok on that THANKS

ok i get it... i must admit i never gave it much thought as it worked ok for me. thanks for that.

On another note...when i do decide to downsize, is it best to sell my tractor with all the attachments as a package or individual pieces better???

im curious, why did you have problems with their controls...??? they seem pretty straightforward

yes, i am amazed at what i have done with the 2650 well engineered machine.

ok thanks...the B2650 hst i have had was wonderful... thanks.

Hi folks..gravelman here. Im thinking of downsizing from my Kubota 2650 cab tractor to a Kubota bx2680 Looks like a real solid little machine and i don't plan on being out in the rain and snow anymore. Anyone out there own one and if so , how is it????

ok will take a look, thanks

ok thanks for that

that is for sure....

Ok im going to try the brazing approach even tho i have little experience. thanks for that tip, will heat it up good

Ok on that

Ok on that...and i thank you, had not thought of that.

i can't complain too much, first time i broke something and i have used it hard. I will say the little B2650 is an awesome machine for medium duty work etc.

Yes, i worked for a township with all Cat equipment...the bills for parts and service would choke you.

i thank you all for these suggestions...im not good at thinking outside the box. Im sure i can patch it up. JB weld for starters. I the tailpipe caught a large limb and bent the pipe, snapped the holder and cracked the muffler. this is what happens when you use a little Kubota like a Cat...

i did buy the pipe from Messicks...i held off on the muffler...$400

Hi folks...gravelman here. I have a 2016 Kubota B2650hstc. i broke the tail pipe off the holding bracket to the frame and also cracked the muffler where the pipe goes in. I HOPE i can do a little welding. I priced out the two parts.......$600+ which is ridiculous. Any suggestions on...

Ok on this and i thank you...will keep you posted

excellent suggestion....will get back to you THANKS

you can hear the engine working like it is trying to pump oil but the pump itself is not louder than normal. Also, the rollout and rollback of bucket and third valve function are fine

yes, i did disconnect and clean all couplers, did not make a difference.

Hi folks, gravelman here. I have a Kubota 2650, 2016 year. Cab tractor hst. I was grappling brush for several hours...suddenl lift arms would not lift.. very very slowly but not fast enough to operate. The grapple and roll out, roll in all fine. Hydraulic level fine, all...

i will do that....thanks very much

trying to hook up a woods 4 ft rotary cutter to a Mahindra sub compact... the top link is 10" and does not pick up the mower like it should...is there a smaller cat 1 out there? i think that would do the trick? never ran into this problem before. any advice much appreciated.

ok on this... thanks

I do things like that now an then...don't ever let anyone tell you they don't. Thanks for the advice. Im going to try and figure how to get a wrench up in there an tighten it up

Thank you all... good stuff. I found the safety switch for the hst peddle had loosened up and was not in alighment with the hardware that activates it... so close but not detected till i got help watching things move. There are two nuts under there that are hard to tighten because access is...

hi folks..those that were following my story of Kubota not starting..thank you all for your recommendations. I was always told...look for the simplest problem first.. well, i never do that :unsure: The nut that holds the safety switch on the bracket for the hst peddle came loose...the...

hi folks..those that were following my story of Kubota not starting..thank you all for your recommendations. I was always told...look for the simplest problem first.. well, i never do that :unsure: The nut that holds the safety switch on the bracket for the hst peddle came loose...the...

10-4 checking all those no luck yet

Thank you all for this info an pictures... i have already dealt with the peddle issue and replaced all worn parts two months ago. Im positive it is not that....this time.

Ok on all this..will double check I once had safety switch problem on the hst peddle...i did check that and it seems to be in neutral unless it faulted. Thanks for these suggestions and i will report back...

Hi folks..gravelman My 2650 will not start..actually the starter will not engage. Been working fine all am, went to crank , nothing...checked as many connections as i could or know of...no fuses blown. juice to everything else on machine. Any ideas out there??? thanks much have to...

ok on both...thanks much

thanks.

leonz can you send me a link to that JD mowere...290 cannot find anything on it.. thanks

i have reason to believe you are correct... but i will also check into that JD mower too...thanks everyone

Whoa...that leaves me out big time... thanks for that

So how much are they?????

Now that is one awesome machine....too much for my little tractor but looks like a great product

Ok i will take a look..not sure if my Kubota is big enough for that...thanks

i hear you all...guess i should just stick with the bh.... my mowing is somewhat rough in places, not for a finish mower.

No in fact i have had several different types of brush hogs with the same result. Operator error:confused:

yes,i overlap all the time. i believe you are right about the speed...im impatient.

yes in fact brand new blades and still get a unfinished look. I usually go over some parts more than once. Maybe im driving too fast

Ok on that..don't care about golf course look but brush hog leaves uncut areas and not a clean cut look... and i understand it is not supposed to... thanks

ok on that, thanks much maybe some dealer would let me try one out..

Hi folks...what do you recommend for a mower that is rugged enough to cut a field, high grass. I have a brush hog but it never cuts clean and neat as it is not designed for that. ive seen sickle bars enough and flail mowers. Are the 3 blade finish type mowers capable of mowing thick grass...

will do..understood.... thanks much do you have more snow than the Tug Hill in upstate NY during the winter??? They really get blasted

Ok on that also...i must admit ive been in some rough fields and the blades have taken a beating...i was afraid they would get off balance.

Ok on that..thanks much

a few rocks...here an there....could probably take em off and grind them but i worry about balance etc.... and besides, it should be very easy to get new ones...i thought

Hi folks..gravelman from So NH i have a Kodiak 60" heavy duty rotary cutter... i am unable to find replacement blades, there are two. This seems very strange to me not finding anyone with blades to fit. I have had it two years and this is my first time replacing blades. Any...

ok on that

Ok on all that. thanks

got em both..thanks very much

i also have a dealer very close and that make a big diff to me....thanks for that. I do believe it is very comparable in price too

This is EXTREMELY HELPFUL...thank you very much

ok on that..i may take a close look...i have not heavy duty work so it just might fit the bill

How does the Simplicity top of the line garden tractor compare to Mahindra, Kubota, JD etc I think the model is called Prestige..you can have a front end loader on it. thanks for any and all guidance

i just purchased a Prince cross over relief valve that i want to mount on my snowplow push frame. did not come with any intstructions. Are there any instruction videos etc for this item??? It is marked C-512 and has the A B C D ports etc. thanks for any an all guidance..

this is a great idea...and i was about to order a blank plate....this is much better...

THANK YOU VERY VERY MUCH

I want to mount a snowplow on a quick attach skid steer plate, have to weld ears to the plate. do i need a valve between the two snowplow angling pistons before ii connect to my third valve on the front on the tractor. i think i have heard it referred to as a "cushion" valve?? Ive seen...

Hi folks...my Kubota 2650 is over 800 hrs..book says Adjust engine valve clearance. How crucial is this and can i go another 100 hrs..?? like thru winter with little use other than snowplowing..??? thanks

I have a Kubota 2650 cab, hst....have used it like a Cat D-8..great machine, loud in the cab tho. I was thinking of trying something different, same size tho... what do folks think about Branson..they look real good. I notice tho no one has extendable lift arm links on the 3 pt hitch except...

hi folks..gravelman here..im thinking of buying a Kodiak 5' HD rotary cutter... any advice or info out there. I need an easy to change blade cutter...getting too old to be climbing under stuff. thanks

gravelman here..pardon me if i asked about this before but..i have a Kubota 2650 600 hrs.. it is a 2016 hydro when i "think" im in neutral and set the brake...get out ofcab, the tractor starts to creep forward..all on its own. Obviously this is extremely dangerous. Any advice on what...

Hi folks...i have a B2650 Kubota...3 years old 650 hrs. Im finding the hydro control is allowing the tractor to suddenly start moving forward without notice. It sometimes does not always go immediately back to neutral and you have to kindof play with it to find neutral. I got out of the...

Hi folks...gravelman here..hope you are all safe and healthy im looking for advice on buying a 5 foot rotary cutter brush hog. I have had JD, Bushhog and Befco.. i have a 4 foot Befco but blades are difficult to change. Im a one person show. So im looking for something that is EASY to...

Hi folks...my Kubota 2650 keep stalling and i believe it is the seat safety switch..i have placed a HEAVY piece of iron under a cushion but still trouble. this is a major pain in the neck. I have removed the seat cushion and tried rearranging things and finding ways to put pressure on it...

Hi guys...and gals.. gravelman here.. my Kubota 2650 is giving me problems starting..it is in the area of the hydro peddle...i can move the peddle all the way forward and then back with no start...if i keep doing that it will catch at a certain spot and start. No longer reliable. do i need...

hi ya..gravelman again.. this time...does anyone have a recommendation for liquid steel use?? i have a very small job, too small for welding. I have used JB weld before but im looking for something you don't have to mix etc. thanks

Hi folks...gravelman here..i have a 2015 Kubota 2650 the hydro peddle is not returning to neutral without bringing it there with the foot... i do not believe it is a lubrication problem as most of the linkage is free etc. I guess there are springs in there ?? before i go to dealer etc...any...

Hi folks..im trying to remove pto shaft from gear box on Befco 4 ' rotary cutter...took out the bolt but the shaft will only slide so far. No lock rings in the way that i can see. What say you...i must be doing something wrong.. it has never been off...maybe frozen but i grease good...i...

hi guys...gravelman here. my mechanic tells me i have a small crack in the muffler where it connect to the manifold. Kubota 2650. I have looked and looked...see nothing and no noise change...how crucial is this.. he said it could be welded. i know small things turn in to big things but...

hi folks...gravelman here..i recently had some work done on my Kubota 2650... when i got the bill there was a note that said.. fan belts need replacing. I looked at them myself and even tho i am not a mechanic..they look fine. No fray, no cracks and all tight. I have 600 hrs on machine...

Hi folks gravelman here...i have a Kubota 2650.. there is the safety switch under the seat that shuts down engine when you take pressure off the seat. It is driving me crazy. I have attempted to find ways of keeping pressure on the switch with no luck. Obviously when you are working the...

Hi folks..gravelman here... im trying to choose between a Mahindra emx 20 hst and a Kubota bx 1880 just using the bucket...maybe a lawn mower later. any and all advice greatly appreciated. It does look like the Mahindra may be the better machine but need to hear from you folks out there...

gravelman here...looking for a subcompact.. 18 -25 hp.. bucket with quick attach if available on small machine. no cab turf tires.. i had a Mahindra max but sold it...should have kept it. Kubota dealer close by.....any advice?? general work around a 5 acres lot...

gravelman here...i need a wheel and tire for a B 2650 Kubota R4 industrial. any suggestions on a parts dealer in the NH area or anywhere for that matter... would like to get it delivered all mounted. thanks folks

hi folks..gravelman from New Hampshire.. i need a new rim and tire for B2650 Kubota R4 tread. any suggestions of a good parts company i can contact. thanks

gravelman here...im looking at a ride on tractor with bucket and lawn mower... how does JD compare with Kubota...im looking at a JD 1023 E with 120 R loader. would like to convert to quick attach hitch also. It looks like that drive over mower is very easy to use etc. Just wondering what...

gravelman here..not sure how small a "tractor" we are allowed to talk about here but i have a 2014 Simplicity ride on mower with a Briggs and Stratton 18 hp engine. It will start and run but only for a short time. I changed fuel filter, same thing. I see a small black plastic item, must be...

ok folks..be patient with me...i am helping a farmer who has a Claas Rollant 46 i have never used one before. It is not new. my bales are coming out too soft and irregular pattern. There is a pressure guage on the machine that i watch and when the needle is in the red...i wrap and...

gravelman here... what manufacturer makes the smallest tractor that can handle a grapple... with quick attach front?? thanks. I know some of the smaller ones are not rugged enough to handle the torque etc but if used carefully... will work.

Hi folks...gravelman here.. i have a 17" deckover trailer...was thinking of building/buying some type of lightweight sideboards..nothing tall , just something to contain loose items if i ever haul something like that... fire wood etc. I could probably make it out of wood, stakes with a rail...

Hi folks..gravelman here... does anyone have a recommendation on quick disconnects etc...i have never used flat faced but im interested. I have been fighting with some of my quick connects and not sure why they have been so difficult to connect. No pressure on lines but im thinking the flat...

hi folks...gravelman here where can i find snow chains for my Kubota 2650 tire size is 23 x 8.50 -14 These are the front obviously. im looking for 2 link for a smoother ride also..im out on pavement alot. thanks for any recommendation.

Hi folks..gravelman here in NH I have a Pequea deckover trailer...17 feet flat, 3 feet beavertail I need to know if anyone has made a support beam for the rear width of the trailer to support something 20 feet or a bit longer. It is 96" wide. Im just trying to figure out a way to...

Hi folks..gravelman from NH my 2650 Kubota is using a 1/4 + quart of hydraulic oil like every two weeks... there are NO leaks. any suggestions besides get it to the dealer while it is still under warranty!!!!!!!!!!!!!!!

Hi folks, gravelman from NH Im buying a deckover trailer with a 3 foot beaver tail Do not move my tractor all that often but haul other things, thus the deckover. Is there a way to convert the 3 foot beaver tail into flat carrying capacity similar to the rest of the trailer?? Even some...

Hi folks..gravelman from NH The small Kubota tractors have turn buckles for adjusting the lift arm swing...they are a pain in the butt. My 2650 has a nice sliding adjuster with pins..very easy to use. Does anyone know of an adjuster that could be used on the small Kubotas or the brand of...

hi folks , gravelman here..i have a Kubota 2650 with a LA534A loader.. twisted the quick attach plates just a little to make things difficult to hook up I finally decide i should pull the pins and replace it, keep it as back up Where is the best , and cheapest to buy a new adaptor Looks...

gravelman here...im looking for a deckover, 16' long..7000 lb range...radial tires, tool box. I was looking at Diamond. I carry Kubota 2650 but also carry parts etc now and then...the deckover is easier to load Any recommendations?? thanks. I only have a GMC Canyon so my towing capacity...

gravelman here...im thinking of trading my Kubota 2650b for a JD 3033 i wanted something a bit smaller but JD does not make a cab for anything smaller than 3033 i dont want an after market cab. any advice, ideas...greatly appreciated

hi folks, gravelman here in NH I have a 2016 Kubota 2650 cab tractor...nice machine EXCEPT the noise in the cab is awful...whiny hydraulics and or transmission...i have to wear ear protection and that should not be in a nice cab tractor...It is driving me to the point of looking for another...

hi folks..gravelman here...i have a friend looking at a Kubota L3901 HST It is only a couple years old.. very low hours. does anyone out there have one?? if so, all advice, opinions very much welcomed. Also described as "electronic throttle" I believe that is when it throttles up...

hi folks..gravelman from NH I have a 48" rotary cutter... 2 acres of field..pretty smooth, few rocks. dont like the looks of the rotary cutter cut...even with sharp blades i still have standing grass here and there...and im not going too fast. Im thinking of finish mower or maybe flail, i...

Good morning all..gravelman in NH I looking to buy a 7000lb gvw equipment trailer...16 foot long. Im thinking full tilt because im getting too old to deal with ramps. i have a Kubota 2650 tractor but i also haul things on pallets for a company so a deck over might be good. I was just...

so im back with my seat sensor problem...Kubota 2650 despite plenty of weight the tractor keeps stalling. Dealer could not find anything wrong.. but it is driving me nuts. is there some way to by pass this or disconnect it all together. I have even put a weight on the seat with seat...

gravelman here... i am looking at a used Kubota...2004 BX1500 D 204 hrs $7500 sounds pretty good...anyone out there with experience with this model??? thanks

I have a Kubota 2650... when my wife drives it, stall happens immediately upon activating the hydro forward or reverse... yes, i told her to put on some weight.. but, seriously, does anyone have that problem?? Im trying to think of ways to override this without disconnecting anything..i...

gravelman here...i have a Kubota 2650 with cab...id like to put a backhoe on it.. im also wondering who has the easiest to install and remove without alot of hassle. I know Kubota has their own but wondering if there are other model backhoes that would fit. thanks

Hi folks...gravelman here in NH I have an older style Fisher snowplow...9 foot wide... i would like to get a 8 footer, i was thinking..(dangerous) would an 8 foot moldboard fit the push frame of the 9 footer??? Im thinking the measurements must be the same ?? just repin it...

Hi folks..gravelman here from chilly NH. i m thinking of buying a small tractor...25 hp with a loader and backhoe. I have a Kubota but would consider John Deere or Mahindra (closeby dealers) Im thinking turf tires, no cab. just wanting to know if anyone out there has an opinion...

I put this on snow removal too..i just bought at erskine 7 foot skid steer mount snowplow...there is no give and take..no oscillation... does not ride on the rough surfaces evenly. has anyone seen any type of adaptor plate for skid steer mount that might allow oscillation thanks

So i bought this new snowplow for my Kubota 2650 skid steer attach.. it is an Erskine 7 footer.. NO OSCILLATIOIN when you turn it full left or right the opposite side digs in.. i know im gonna hear 'buyer beware" but i thought there would be some give an take....i have rough surfaces to...

gravelman here..i have a Kubota 2650 i was going to put a light weight 8 foot plow on it... might be too big, Perhaps 7 footer in the 600 lb range would better.. anyone out there with suggestions ?? i like the Erskine too.

Hi folks...gravelman here. i have a 2016 Kubota B2650 the exhaust makes loader arm and area around it all black...would like to get 90 degree elbow to redirect Do you know where i could find exhaust parts, fittings?? Maybe tractor supply has this stuff , not sure. thanks much

gravelman here..i have a Kubota 2650 looking for a quick attach hydraulic angle snowplow...i believe it could handle up to 7 footer.... any brands suggested?? i like full trip too

I have a small tractor that is registered in NH, i want to be able to go on the road occasionally and homeowners will not cover if it is registered... seems strange to me. Anyone recommend an insurance co that might cover the liabilty angle. Im not contracting out..just want coverage if i...

here is the pictureL2bob@aol.com

I have a brand new K 2650...there is a pigtail hanging in the factory cab...left rear of seat. The book says 12 volt outlet. There is power to it all the time...i have never seen a plug quite like this and would like to find the right connector and add a cigarette lighter plug. Any ideas...

here are a couple pictures..not sure what type of plug this is or if there are adapters to plug in

Hi folks...gravelman here..i just bought a brand new Kubota 2650...beautiful machine. It has a cigar lighter plug on the dash board and also, a pigtail wire behind the seat left side. It has a strange electrical connector and im not sure what it is for??? yes, i will check with the dealer...

Hi folks...gravelman here...i have a Mahindra Max 25 with a ml202 loader. when i lift am implement with the 3pt hitch the bucket raises up 3 feet and then drops back down... any ideas on how to correct that or what is going on?? thanks much as always people.

Hi folks..i have a 2014 Mahindra max 25...will turn over and blow lots of smoke...will not fire. Im told maybe glow plugs not getting juice but it is not cold for one thing... with a little shot of starting fluid it started right up.. and continued to start after it was warmed up.. not...

Hi folks...gravelman here...i have a Mahindra max 25 no cab I want to replace it with a cab tractor strong enough to use a small grapple. The current machine would not be strong enough to handle a grapple. Also need rear remotes for snowblower chute control. I want to stay in the 25 to 30...

Hi folks...gravelman here...im thinking of getting a 3pt ht pto wood chipper. burning is a pain nowadays. any recommendations. It would be on my Mahindra 55 hp tractor Anything over 6" or so i use for fire wood or fire pit so nothing big would be needed. Thanks much

Hi Folks... i just put up a garage...gravel floor. was wondering what some of you may have used besides concrete, asphalt etc to provide a good solid flooring. I see those mats at Tractor supply.. just wondering...thanks for any advice. Gravelman Westmoreland NH

Hi folks..i posted this on "attachments" but thought this might help me too..im looking for a set of wheels, all steel or steel rims and tires that would fit a John Deere model 52 two bottom trailer mounted plow...1935 vintage... any help or suggestions greatly appreciated. Gravelman...

Merry christmas folks.. gravelman in Westmoreland NH..im looking for a John Deere Model 52 double bottom plow. made in 1937 to 39 Im restoring one i found and the wheels and tires are junk sooo i need new wheels and tires or just plain steel wheels. Thanks for any direction and help

Hi folks...gravelman here...moved to Westmoreland NH... a piece of heaven up here. I am wondering if anyone has thoughts about what kind of 3 pt hitch mounted log splitter i should get ...i have a Massey 36 hp tractor. will only use it occassionally but was trying to avoid a selfcontained...

Hi folks...gravelman from Hopkinton Mass. im trying to decide on a new compact tractor...long story short, im being told Mahindra has the only engine that complies with the emission standards without the regeneration stuff.... i like the sound of that and am nervous about the regeneration...

Hi folks...gravelman here..i want to buy a 50 or 54" rototiller for my tractor. i have a Mahindra Max 25... any suggestions?? will not see alot of use but i dont want piece of junk either... thanks

Hi folks...gravelman from Hopinton Mass. What a winter... i am hoping to sell my 2011 Massey Ferguson 1652 hydro....paid $42k for it and added the front pto and 3 pt hitch. so i could use my front mount 7 ' snowblower...it worked great.... Id liike to get $40 k for it The front mount...

Hi kids...this is gravelman from Hopkinton Ma. i know ride on mowers are not subcompacts but...anyone have a simplicity ride on that is new...cannot put gas in the thing unless you have all day to do it.....not sure what to do. But, im also looking for a John Deere Model A 1950's...

hello everyone...gravelman here from Massachusetts....i am trying to get accross a field that has one wet section, about 12 feet wide....afraid to try it. Is there anything out there that could be laid down...besides plywood , to try and get accross without sinking out of site....yes, i could...

im thinking of buying a subcompact tractor...18 or 22 hp..all wheel drive...belly mower, front end loader Im looking at Kubot and Massey Ferg..... i kinda like the Massey better so far...any advice would be greatly appreciated...

The best way i can describe it is for all of you to go to www.zuidberg.com It is a 3 pt hitch and front mount pto. Cost me about $11,000. but i can tell you it is a very very rugged piece of gear. i will try to include some pictures of my setup but their website describes it best. I plow...

i just installed a front pto and 3 pt hitch on my Massey 1652 called Frontlink...it is awesome no more backing up if i get prolonged snowplowing duties....work for my town. anyone interested let me know and i can share pics etc. Gravelman

I have a Massey Fergeson 1652...am going to install a Frontlink 3 pt hitch and front pto so i can use my snowblower going forward...do alot of it. Does anyone have any experience with this??? Frontlink seemed to have the best deal and equipment.