Search results

Yup, on the roller assembly. Yup on the gearbox too. You're welcome... Dave

I spoke to one of the guys at Seppi, they said that they don't have the old roller anymore and have a new design, they have incorporated to work with the older mowers. I am not clear on how to check the level of gear oil to make sure it is correctly filled. When I look into the gear box I am...

Wow, you are getting after it! here are a couple photos of the SMW hammer. After market from Clean Cutter Tiller Blades. item name MAZ07. Here is a picture of the SMW hammer front and back.

Thanks Doug, my hammers are SMW(short neck) size not SMO(long neck) On the back of the hammers it is cast into them mine has the SMW casting. I have attached a screenshot for the nuts and bolts. The 90 is the length in mm in inches it is equal to 3.54330709 inches--not from Seppi just curious...

I'm definitely watching this as you bring the mower back into service! Can you tell me what hammers you have -SMW? also how long are the bolts that hold the hammers. Mine were welded on and I had to cut them to get them off. I am thinking around 3.5 to 4 inches hoping you can verify that...

Thank you for your reply, I am in contact with Seppi, and they are getting me set up with what I need!

Hi Doug, if you don't mind can you say what they are asking for the SMO 200? TIA--Dave

Here is a number for Seppi M in america---

I have an SMO 250 that looks like this mower only it is a little larger. I have ran mine with a New Holland T-2410 55hp total. It would rum the mower no problems. I always thought the tractor a little lite for this mower. I now have a tym t-700 and am getting the mower ready to run on the...

Thanks for your help!

Hey thanks for that do you have a contact number? I found them today and will call them later today. Thanks again!

Hi I am hoping someone can point me in the right direction. I have a Seppi offset orchard mulcher that takes the SMW hammers and am looking to replace them and the bolts and nuts that hold them in place. I have bought from flail Master in the past but they are out of business and was hoping...

Hey Cloverhill, hope you don't mind me asking but what is ANR?

Just curious--how many hours are you getting out of 11-12 gallons of fuel?

Just wanted to jump back in here to say that I have put about 120 hours on this tractor from the middle of September 2023 until now. It is a beast of a tractor, Compared to my t2410 new holland (which was a very nice tractor too.) Getting ready for planting vegetables this season. Plenty of...

I had a 2007 T-2410 that I recently sold. It was a Shibaura tractor with a New Holland name plate on it. It was a very nice tractor. Never any trouble in the 700 plus hours I put on it. To answer your question, I think that it was in or around 2009-I could be wrong but think I am pretty close.

This may be helpful to you. Dave

All this stuff is fear based. If they (the gov't.) can get you in fear then "they" can get you to act in a predictable way. (take this vaccine and that vaccine-don't forget the booster) You can always tell when a politician is lying--their lips are moving. There is coming a time when people...

Thanks Chris, I looked at the 2565 it was decent but also looked at a one owner TYM T-700 with 636 hours vs. 1200 plus hours on the Mahindra 2565. I bought the T-700 both are TYM tractors one with a John Deere engine and the Mahindra had the Mahindra motor. So far so good the T-700 is a beast...

I didn't realize how long ago this was posted!

I think you're going to love this! I was out scrounging some wood at my neighbors house after a wind storm and the tree service had one of these Avants. It was very maneuverable and could lift large stems that he cut and piled up.

Congratulations would love to see some pictures when you get it!

I would look at Split-Fire made in Canada, I have their wood splitter and the materials and workmanship are very good. They make a wood chipper and ship with very reasonable rates. If I were in the market I would look at their products. Customer service is very good as well.

that's a nice-looking tractor!

You make some really good points and seem to be very knowledgeable about the manufacturing process. Is there any way that a prospective buyer can tell which components are made with better materials? If we are using price as a guide, could we not be led astray? In this current climate it seems...

I bought a stump bucket from Cleaveland Equipment it really does a nice job. A very quality piece of equipment at a decent price delivered to my door. Jeff Von Lehmden 4001 Towpath Road Broadview Heights, OH 44147 Phone: (440) 627-6366 Email: jeff@cleveland-equipment.com Website...

I have that same motor in my T-700 my light comes on and then goes off but doesn't seem to help or aid in the starting of the engine. I replaced the glow plug and it still didn't matter it was a rough starting son of a gun. I bought an engine block heater for it and now it is a totally...

I am wondering if the dealer has a unit on their grounds that they can get the part from. Just a random thought. Also I want to say that I feel for you and your father. My father went home in July of this year. I don't say this to garner any sympathy but to say that you have your dad right...

Phone number is in the screenshot, here is a link--- Farm Equipment For Sale | www.rosseelsonline.com

I posted this in another thread and then I found this thread and thought I would post it here. Should have seen the look on the guys face that was driving down the road when I was coming up it. Turned out it was my neighbor and we both had a chuckle.

Here are a some more pics of the stumps I tore out yesterday and then grabbed with the grapple to put on the burn pile. I will be making a short video of a tear out in the near future.

That's a nice RB-Bison makes some nice equipment in my opinion.

Just curious what rear blade you have. That's a stout rear blade. Do you have 3-way hydraulics on it? (Offset, angle, and tilt?)

Michigan, he has a guy that will haul them too.

Here are some low hour tractors you can look at he has more on his sight-good luck in your search...

Thanks for the pointers! I should have 50ft or so of logging chain to use so should be able to keep the stums at bay.

Yes sir, I am getting some use out of it. Lots more to do and winter is coming. Looking forward to being warm this winter. Thanks for the reply!

I like the idea of pulling them over instead of pushing them! I will give it a try with the blanket on the chain of course. Thanks for the idea.

I don't wanna know lol. I wouldn't borrow it, I would be too worried that I would break it-even if I couldn't break it.

I like the idea of leaving a bigger stump-more leverage! It definitely puts stress on the loader. I am going to try and make a video tearing out a set of stumps so I can see what's going on up front. I for sure don't want to mess the loader up.

Keweenaw County Yooper That Ford is looking good!

I have a big brush pile that I am going to burn I will start in the morning and as it burns I will drop the stumps on the pile when I am done burning I will till the ash into into the ground. I am going to get 40-60 yards of compost and I will work that into the same area. I will be growing...

So, I had a couple minutes today and tore a large stump out that I started to work on a couple days ago. I am going to try to video the next stump I tear out. Here are some pics cause I know you guys like pics. It doesn't take long and everything is wet.

I wanted to post that I have put 42 hours on the clock in the last 26 days I have more stumps to tear out It would be a better option just not sure how much I would use one-probably find a lot more uses for one once you have one. The log in the pick was a one mile round trip. The 2 mile...

I wanted to post a quick update. I have put 37 hours on the clock in the last 25 days I have more stumps to tear out and more logs to cut u and fetch with this TYM T-700. Here is a pic of a log I grabbed yesterday Approximately 1 mile round trip and I made 6 trips.

Hi, I just wanted to jump in here today and show a picture of a log that I grabbed yesterday-I could lift it but could not curl it. It took 6 trips to grab all the logs and a good sized stump. I have more storm damage to grab but need to bring a chainsaw with me so I can cut to a good length...

I saw this video and I thought of you. Hope you don't mind that I put it in this thread but didn't know how else you would see it. Hope you like it!

here is a short clip of my Slit-Fire log splitter it will split up to 36 inch lengths and I have split 40 inch red oak diameter by 30 inch length. It lifted the block just fine but was very hard to manipulate once on the splitter-Now, when I get logs that size, I just cut them in two for ease...

Hi, I want to stop in and give an update on my new to me TYM T-700. I have put 21 hours on the clock in the last 12 days it has run my 8.5' Matthews company flail mower, cleaned up 26 trees from the storm damage we had back on the 24th of August using my chainsaw and the grapple bucket., most...

One of the TYM youtuber's has a video on how to change those setting-Tractor Time With Tony--I think--If it wasn't Tony then it was Hamilton Farms youtube channel.

Yes, I just finished the thread and I am glad that the OP was able to start over with a minor beating on his wallet.

I feel for you. If you can prove that the hour meter did not work when they recorded its hours you will be in a better position than if you cannot prove it was working at the time of recording its hours. Other than that it will be your word against theirs. Next do they have a known history of...

I'm not surprised that someone else saw and liked the looks of this tractor. I cut and cleaned up 5 cottonwood trees yesterday that were approximately 80 feet tall each. It took me 5 hours to complete. Prior to getting this tractor and grapple, I cleaned up one ornamental pear tree 50 feet...

I did buy it from Rosseel's.

Good to know! thank you! Thanks for the link I grabbed a can. Dave

Thank you, I am excited to put it to work. I had an open station 55 horsepower New Holland T2410 that was a great tractor, very robust and powerful for its class but lacks the size and weight of this tractor and was not able to move the items that this T700 can move.

I know that it was sold at auction and in the description it said it was a one owner, 623 hour tractor-it has sat outside in a lot for almost two years. The pics look better than it does in real life it is sun faded and needs a good washing and waxing. The cab is very clean and there are no...

no action shots not that advanced- here are a couple--

Hi, I just wanted to post some pictures of my new to me TYM T700

Thank you! Thanks for the manual too! It does have the John Deere engine. I get lots of traction with this tractor and have been impressed with how easily it uproots and pushes over these poplar trees that spring up everywhere. So far I am liking this tractor.

TractorTYMe, thanks, I just bought a t700 with 632 hours and I was curious how he was getting on with his tractor. My new to me tractor should be delivered this Saturday. I'm hopeful that it will work for many more years to come. I will post pictures when I get it. Thanks again.

On my T700 it has on the Range selector 4 ranges LL, L, M, H 16 F, 16 R, I would see if you can find a picture of the Range selector stick in that tractor. Should have 4 ranges! Congrats on an awesome tractor! Really like that Deutz motor.

On my T700 it has on the Range selector 4 ranges LL, L, M, H 16 F, 16 R, I would see if you can find a picture of the Range selector stick in that tractor. If you have 4 ranges first one should be your creeper gear.

Hi I was just checking to see if you still have your TYM T700

Thanks for your reply! Dave

Looking for a larger tractor and found the Mahindra 2565 cab tractor. I can't afford new and don't want to finance if I don't have to. Does anyone have any experience with this tractor model? I have done some research and it seems most are satisfied with their tractor. Do you find this model...

I have been looking at buying another tractor and want to trade my New Holland in. I have been told by 2 dealerships that I would be better off selling my tractor than trading it in.(they offered no price on trade) They were both TYM dealerships. I may list it for sale but more than likely I...

Thanks a lot! I will check them out.

I know this was a short while ago but does this company still have the same pricing on their tractors that are listed on the white boards?

But very educational!

I sold a bobcat to a tractor dealership, he ran the s/n to verify it wasn't stolen. I am not sure if he did or did not-it is what he said he did. If that is true maybe you could have a dealership verify your serial number? Just a thought.

Too much heat. I tuned a 5.9 and 6.7, tuner would shut down engine rpm if exhaust temps went too high. That is how I set the tuner. YMMV

I recently upgraded my hpx for a 2011 xuv 625i. I was well pleased with the hpx but after some trauma to my back followed by several surgeries I need something that rides better I mostly hunt, gather wood and use it in our farming operation. I hunt and field trial beagles. After my last...

Just wanted to thank leonz for his excellent advice cleancutter has what I need and at approx. 22.00 plus shipping. I am well pleased with this so I will order 24 and get the nuts and bolts too as soon as I am able. I bet it is a whole other animal with a bite that actually has teeth. Even as...

I bought a flail mower a couple months ago and the guy I bought it from just came back from vacation and delivered my new to me mower. It has hammers and they appear to be quite worn was wondering if anyone could direct me as where to go for new hammers. I have attached some pics of it. It is...

another pic

I mentioned in my first post that I cut wood with a friend that has a tc 45 and was amazed at the verstility of that 4x4 tractor. After we loaded his truck pulling an 18 ft bri-mar also loaded with wood, we cut across a field and got stuck about halfway across and that 45 hp tractor with ag...

Hi my name is Dave i have been lurking for a while and what started the lurking was when I took a trip to the woods with my buddy and he brought his tc45 4x4 we dropped 8 trees ash and elm. I was amazed at how well a tractor could get around climbing hills in the snow and manuerving about like...