Search results

I’d rather not drop the $938 on the new attachment. They make us buy the entire assembly. I’ll go that route if I need to, but I’ll try the chain up recommendation first, then heat, the cut/weld first. Breakout force on the LA 1153 is only a bit over 3000 lbs, so I don’t have much hope on...

While spreading shale when the track loader was down, one side of my tooth bucket jumped off the quick detach. I wasn’t quick enough on the clutch and the force immediately twisted the tube that separates the two side of the quick detach. Reading through the forums it looks like this is...

My explanation of which lights might have been off. I’m looking to replace th entire assembly of the two lights at the top.

While we have the tractor in the bay while the bottom plate is getting wrapped up, I’m going through the list and seeing what else I can get ticked off before the flakes start flying. Going to replace the 4 40watt spots, the 2 on the front and the two on the back the cab. Has anyone made this...

We are getting to the final stages with the assembly for my m7040. Once we get everything tacked together we will be taking it apart to clean up and paint before final assembly. This is a good representation of the various components and material we used. Everything but the bolts came from...

This was before we started. I’m the fat guy with outstretched arms. There is an after picture of the one looking up the hill with the road running through. We’ve got 102 poplars like the one in the picture that are going to fund the timber frame we want to rise. All in steps.

I owed a few pictures from the build.

Hi all. First, I know we hashed over this a while ago. The posts I saved with photobucket pictures are a broken, so I’m starting from scratch again. I got got tractor back in MD and I’ve got a window until the snow starts flying to get some fab work completed. I’m not very good, but have a...

Moving between the hole definitely changes the angle of the blade quite noticeably. On the blacktop I want to 'float' without any additional down pressure. The blade is quite heavy and simply pulling it along should work fine. What I don't want is the effect I get on the bucket when. Putting too...

I've got my m7040 with a Wood 3496, without feet, on the back.in MD for the Winter. Only had the opportunity to use it twice this year to clear snow. I've got a good run of blacktop. My neighbor has gravel. My last go I did only mine and notice I did a pretty good job of scalping a few high...

This is how I'm set up This is Ed's rig after it was delivered. I'll take one when the blower gets here and more action photos.

One of my stock 55w roof utility lights went out last night. Looking for replacements. Had anyone swapped out the stock roof lights on an m5040, m6040, or m7040, for LEDs? Wondering if you had to pull the roof liner to replace the mounting bracket or were you able to use the existing ones for...

My neighbor just bought a B26. We share a 1/4 mile lane. We can have snowy winters, most storms are in the 4-6" range. He told me about a pull behind blower he is looking at. Anyone have experience with these? I just have an 84" bucket and back blade on my m7040. I mostly use my 4wheeler and...

I can shoot this all day long NP...actually traded my Anaconda for it. I'd never go back cause I was doing it wrong lol - All day long =40 rnds then it's time for a new shoulder but all 40 are pretty much in same hole out to 100[emoji16]

Looking for a goose to hull my tractor between TN and MD. With implements and wet I'm just under 10K. The deck overs I've looked at appear a bit beefier than their between the wheel brethren. My bucket is 84" but don't see that as much of a problem. I like the axle placement of a between the...

I've got an M7540 cab with loader and hydraulic back blade with loaded tires. I've never had it on a scale and need to move it 500 miles. Any ideas of my weight range? Need to drag a trailer with me and want to make sure I have enough under it on the way back. Manual sales 5600 lbs dry. Thanks!

Whistling Dixie in TN. I will make something of a temporary shield but I'm hoping one of the fabrication gurus can get a pattern and do some real production grade work....and yes I know it will cost me but so does having the machine down ..... And we haven't even started the had work yet.

I've seen various examples of skid protection other members have fabricated but I don't have those skills. If there is anyone out there that can make me what I need for a m7040 drop me a line. Ripped a filter off today in the woods me need a solution.

Need a 11,000 lb logging winch for my TN property more than I need a 78" snowblower...:)

Only weights about 1000lbs....:)

Runs well on my Kubota m7040, 11gpm flow. Spins gear and throws about 100 feet.

Yup. I do but I can't seem to post it. I can email it if you are interested.

Agh...TY.

Thanks. I was able to post in the 'Classified' section, but I can't post to the private party forum. Oh well, guess something is better than nothing. Thanks for the help.

I can see the 'Post new thread' button for the 'Wanted' ads, but it does not show up for the 'Private Party' ad. What do I need to do to post?

Can't wait to put it to work. It is really set up well. Gonna take some time and practice attaching the bucket to the quick detach but happy I have it.

New to the NH group. I've been looking for a new to me, utility tractor for use on a piece of property we are closing on this week. It is 50 acres of a hollow, with mature hardwood on steep slopes and 10 acres of bottom pasture. A 4030 is available and after looking at the specs, it looks fits...

Looking at winches and weighing out the cost/benefits of manual versus hydrolic. I have the steeps slopes of a hollow and large +24" hardwoods. Leaning toward a Mahindra 6530, 65/57 hp, with EA grapple. Looking at the Hudson 55 series winch. Comments?

Drove down to TN and did a survey of the property and met our guy who is going to knock in our road. The first pic is broinlaw in front of the ave sized timber we will be handling. Second, with big belly, is me in front of the biggest one we found running the boarder fence....it made it this far...

We just got back from the property. The first pic is my Brotherinlaw. This is the age size of the timber. Second one is me. This is the biggest one we found on the property line. Not going to do anything with it, other than let it grow. This first one is the size I will need to handle. Already...

Not looking for a cab tractor, but have a a 7040 in the family with 225 hrs, barn kept, that is part of an estate of a relative. They know I'm looking and are willing to give me a 'great deal.' I'm thinking if I can help them out, give it a try, and if it just won't work use it toward the...

In the process of upgrading my CUT to a utility. Just purchased 50 acres, with a good stand of 24-36" hardwood. I'm going all in and this week we are headed down (it's in TN) to mark the path for the road and mark the initial trees for the house we are building. Still not sure if we are going to...

Hi. Moving from a gun CUT to a real utility piece. Thought I had it figured out until I visited the local Mihandra dealer today. After seeing the mPower 75 in person, I'm feeling pretty convinced rather than used green or orange, new red is on the menu. Can only imagine what the 85 will do. I'm...

Currently have a green 3720. Really like it, but i need more power, just not sure how much. I purchased a nice tract of some pasture, more mature hard wood. Need enough power to skid large 24-36" logs and run a FEL with grapple to load them onto a portable saw mill. Also, need to keep center...