Search results

Looking for suggestions on oil filter removal. Gone through 5 oil wrenches on my Ck3510hse trying to remove the motor oil filter. Probably try a good strap wrench next. Anyone know what size cap wrench fits the filter, 93mms x 15 tooth is too loose.

So I ordered my block heater today for my 18 Ck3510hse . How hard does the freeze plug come out and what is the best way. I did order it from my dealer so I hope it goes in good. I did buy a lower hose heater but it doesn't look like it would fit well. The hose is only about 6 " long and not...

Does anyone know what size the lower radiator hose is on my 2018 Ck3510hse . I'm thinking putting in a lower radiator hose heater and I just don't want remove the hose to order the right one. Tractor starts great but runs ruff a on cold days for a couple of minutes. I just want to give it a...

So the other day at work I saw a tailgate slander on the front of bobcat. Talking to the operator he said the just welded a 2" receiver to a quick attach plate. He said it works pretty good. Now I guess I need to find a good used tailgate sander. Has anyone else tried this .

Do you use any kind of compound on the threads of hydraulic hoses , such as Teflon tape or pipe dope.

Has anyone used the titans 3 point ssqa for a snowplow. There are a couple on tube but nothing showing plowing snow. I'm wondering how strong they are, if they are worth buying.

I been wondering if there is a list of backhoes that fit my 2018 ck3510se . I have seen a few kioti backhoe forsale on craigslist and it got me thinking

I have been away for 2 weeks and my daughter call me and said the Cel light came on when starting it up. I got home today and yep the light came on with reduced power, plus it seems that the engine is running rough. This tractor is a new ck3510se with 4.5 hours

Received my new tractor yesterday and have some questions. 1. I found a couple of wires in back by the seat, can these be used for running extra lights. Also what is the max wattage they recommend for the lighting system. 2. What type and size are the hydraulic fittings for the rear remotes. 3...

Well I did it , Saturday I signed papers on a CK 3510 se should have it by Friday

Well after 2 years of various repairs on my tractor a 2001 - 4300 that I bought new. With a lot of thought I decided on replacing it. I decided on a Kioti CK 3510.

Think of trading in my JD 4300 toward a ck3510 or 4010. My question is what would I need installed hydraulics to operate a loader mounted grapple or snowplow. My jd has a 3rd valve.

So I just got my 4300 back together again. This time I had the injectors checked and rebuilt. Now it's blowing what I won't call black but very dirty smoke. I have been told that air in the lines will cause this. What's everyone's thoughts.

Earlier this year the engine on my 4300 was rebuilt. Since the rebuild the engine has started and run pretty good except for when it first starts it has a large cloud of what looks like blue smoke. My oil is still full and looks fine. The anti freeze looks fine too. The engine has less than 50...

hopefully this workers

So a while back I posted my jd 4300 had exhaust coming out the valve cover breathertube. Well I took it to the dealer and they tell me the cylinder walls have scoring on them. They gave me a price to fix it of 16000 , that is correct not a typo. When I get it back I will with help properly...

Does anyone know how to test the compression on a 2001 JD 4300 with a yanmah 3 cylinder diesel engine.

I am thinking of getting a backhoe attachment for my 4300. Besides the JD 47 and 48 what others will fit my tractor.

Is there a way to use the pto for stationery equipment, such as a 3 point splitter with out someone sitting on the seat. My other question is down by my right foot is a three position lever, lock-open book - unlocked. What is this lever for, I have never used it.

So I replaced the thermister on my jd 4300 today. I think John Deere could have come up with a better idea for placement. I ended up extending the wires so I can get to it without moving the fuse box next time. I might be an electrician but my wife use to work for a computer network company so...

I have a 5 ft wide Kubota snowblower on the back of my jd 4300. It seems to blow only about 5 or 10 ft. It seems to me it should blow further than that. I have the pot a full speed , is there something I might be missing

I am thinking of putting a electric winch on the back of my tractor for when I sometimes I get stuck or sometimes pull out a tree. I probably will use a 12000 lb winch, my question is size quick disconnect Anderson plug do I need. I don't plan on leaving it on all the time plus it will make it...

My 2001 , 4300 has been starting hard in the cold weather. If I warm it up after a few minutes it will start right up I am thinking maybe it's time to change out the transmission oil .it's been about 200 hrs sense the last change. I use this tractor more in the fall and winter for firewood and...

I have Benn thinking of adding a log lift to my mtd log splitter. I don't believe I have the room for a hydrologic lift but I have thought about using an engine type lift. I saw one a harbor freight that mounts on the back of a truck with both a hydrologic ram and a cable. I would make my own...

I bought a 3 pt hitch snowblower today and when I got it home I found the driveshaft went on hard . I did get it on after greesing the splines. does anyone have any tricks to installing one. Just so everyone knows this is my first pto driven implement.

Does anyone know the size of the lower Radiator hose on a 2001 jd 4300 it looks like 11/4 . I am planning on putting an in line block heater in the hose. Thank you for your help

Awhile back someone posted a grapple attachment he had made to use on his Fel fork attachment. It looked like they cut up an old loader arm to make it. Does anyone else remember this I can't seem to find it.

So I have a chance to buy a Super Apache 3 pt hitch chipper shredder. It comes with drive shaft and 2 different size screens. It is in pretty good shape and I don't think it has had much wood run through it. The owner is a older guy who ran a small greenhouse operation up untill 5 years ago when...

I bought a troy bilt pony tiller this weekend for 25 dollars. It doesn't run yet. The engine was changed out at some time with a single shaft so no reverse. The compresion is less then 50 so I am thinking it might be junk. It is a Briggs so changing it out can't be to hard if I can find one. It...

So the energy valve detent stopped working correctly so I bought a new Prince valve. I wanted a Prince because they came with better recomandations then the Energy witch by the way has ball bearings in the detent wore out in 5 years. I know people that have had the Prince valves for a lot more...

A friend of mine who works for a forklift company gave me a set of used forks, so I have been thinking of building a fork setup for my JD4300 but I have noticed that most builds on here the bottom is kicked back from the top . Is there a reason for this

I have a 2002 Mtd log splitter 25 ton . My proplem is that the control valve holds good for the return stroke but does not release to neutral when it reaches the end of its return stroke. Has anyone else had this proplem , is it hard to fix the detent valve.

My 2001 John Deere 4300 with sync reverser keeps poping out of 2nd and 3rd gears and it doesn't matter if it is in range A,B,or C . Sometimes the foward / reverse lever will also pop out of gear. does anyone have an idea of whats happening. And how to fix it

Has anyone ever heard of a cordwood saw made by the LaFont corp. I bought one last year and it works great but I am wondering if they ever made any attachments.

Does anyone know of a mower to fit a JD35D excavator , what is better a flail or rotory, how big can we go

I have been working on my FEL snowplow, and have a question for you guys. Some of you make the plow so it is ridged with no free floating up and down movement. Then so of you rig up a chain setup so you get so float out of it , such as if it was on a truck. To give you an Idea my driveway is...

I have a snowplow for my 2001-jd4300 and I would like to hook up the angle rams to my tractor. It looks like it already has the 3rd valve installed except for the lever and the hoses. I can buy the kit from JD for about 350.00 but has anyone built thier own kit to hook up to the exsisting valve.