Search results

https://www.agrisupply.com/string-wing-rope-wick-chemical-applicator/p/71934/?utm_source=bing&utm_medium=cpc&utm_campaign=NB_PLA_AllProducts_BING&utm_term=4582352216165189&utm_content=All%20Products These will work for your intended purpose. There is a hand held model also. Buddy of mine used...

Yes aluminum sucks. Hopefully you applied some never seize for the next time or next person.

Glad you found replacements. Ive had luck with stubborn gland nuts by heating the outside of the tube and hitting it around its circumference with a good sized brass hammer. Usually spraying a penetrant in between heating and hammering.

Amen

Do you not have a diesel repair shop nearby that specializes in pumps and injectors. If so they should be able to rebuild yours cheaper than a new set.

I have used two stroke oil before to aid my older diesels. I chose this over atf because it is ashless and designed to be used in a combustion chamber all the things atf isnt.

Treat the area with Pramitol or its equivalent. This will prevent vegetation from growing.

I use to think the same until I started watching motor oil geek. He designed and formulated lubricants plus has a lab. In one of his videos he showed that a motor oil that had the largest wear scar per the gear oil test actually had the least engine wear when an oil analysis was completed. He...

I have used power service for years and no problem. I watch project farm all the time but the wear test he uses was designed to test gear oil and will give false results when used for other lubricants. The motor oil geek explains and proves this in his videos.

Id look into whether GA sold them without restrictions. Whats a little smuggling between friends.

Dont know why it came out messed up. I put six in the pond. I was shocked how well they took care if it.

Sumthin went crazy

I had that stuff in my pond. By late summer it looked like you could walk across it. I purchased [emoji6[emoji640][emoji638]] grass carp and within two years they eradicated it. All my carp have died off and it still has not returned years later. My pond is about a [emoji637]/[emoji640] acre.

Top of curb was what I remember but who knows these days.

https://www.amazon.com/DuPont-Chain-Saver-Self-Cleaning-Lubricant-14-Ounce/dp/B00D3G6FD4/ref=asc_df_B00D3G6FD4?tag=bingshoppinga-20&linkCode=df0&hvadid=79920803409825&hvnetw=o&hvqmt=e&hvbmt=be&hvdev=m&hvlocint=&hvlocphy=94191&hvtargid=pla-4583520382446047&psc=1 I use this where I need a...

Picked up two buckets of oil at RuralKing while its on sale.

I use to have one I pulled behind a B2150. Used it mostly on bare soil but occasionally I took out some humps in sod and I dont remember it plugging up bad.

Another one for the used oil and diesel. Let it sit in the sun after applying. I always use gas engine oil never diesel. Just a bit too sooty for me.

I keep forgetting that Tarter is not the same family owned business it once was. It has been sold to some investment group and things have changed.

Should be able to find what you need here if not just give them a call. They are located one county from me. https://tarterusa.com/manuals-and-guides/#manuals

I was just thinking this needs to be in the HF tool discussion. I have one also.

All my funnels are cleaned after using and placed in a large clear tote. They are always clean and dust free when I need one.

Mine has the Kubota and while not a breeze to do it is doable. Have never worked on one with the Duetz.

I have been thinking of getting the Vevor one for my dad. He is starting to have some joint and mobility problems. I dont want him lifting 5 gal jugs. I can take and get it filled for him.

Its not uncommon on the 63 series for the fuel pickup tube to deteriorate. Another thing that will cause it to fall on its face is the main drive belt slipping. I have a 763G and its been pretty good.

I have this in my tractors fill neck. It helps catch stray bugs and whatever. My fuel goes through a 10 micron filter water separator then a 2 micron final filter from my bulk tank. Cant be too clean.

I swapped out our fluorescents for leds in the church buildings. Everyone loves them. I cut out the ballast and wired them straight. No tombstone replacement needed. A lot of our members wanted to know where to find them and if they came in different lengths and pin configurations. Which they...

Thats a nice set but I found that no matter how many tools ya got it aint the right one. [emoji30] I also have a lot of modified to make it work tools.

Ive changed a few tires with mine also. Works but it is a manual tire changer. Requires some effort. [emoji[emoji[emoji6[emoji640][emoji638]][emoji640][emoji640]][emoji640][emoji[emoji6[emoji640][emoji638]][emoji640][emoji6[emoji640][emoji637]]]] It needs to be anchored firmly and there are a...

No they will cross the state line and bring their crap ideas with them. Secure the states borders. [emoji56]

Yeah they are great. No more gloves needed just to change a cartridge.

https://www.amazon.com/s?k=tools+that+use+dewalt+batteries+water+pump&crid=368G6B9SPC866&sprefix=tools+that+use+dewalt+batteries+water+pump%2Caps%2C200&ref=nb_sb_noss One of these may fill your need and save you some money.

All I use since I got a lube shuttle gun. No mess, fuss or drips. Admittedly I do not have to grease a lot but if I was doing a lot of equipment again then I would go back to a pail and air pump.

I have all of these and probably a few duplicates. None will work in the confines I have. There isnt much room between the shaft and the coil. I need a 90 degree pair with at least 1 5/16” tip reach. It looks like I am going to unbolt the compressor. Not an easy task to reach the bolts. And...

https://www.walmart.com/ip/PerTronix-Electronic-Ignition-Kit-12-Volt-Negative-Ground-fits-Massey-Ferguson-35-TO20-50-TO35-65-TO30/525813754 My dads neighbor had good luck with this replacement. Higher initial cost but runs better.

All of my cans have these in them. I drilled the hole and used a piece of soft wire with a L bend on one end to hold the stem as I pulled it through the hole. Taped the jaws on my pliers to prevent thread damage while I used them to hold the stem as I tightened the nut. Pulled the wire through...

Its looking like I will have to make one by heating and bending a straight pair. Hopefully the temper will hold.

I have three different ones that take the changeable tips.

No tho tips are too short. Thanks

Yes I have a couple of those also. Tried modifying one of them to work but the assembly is too thick to get in the opening.

Im replacing the clutch assembly on a van without pulling the compressor. All I have left to remove is the coil and due to the hole depth and proximity to the radiator none of my pliers will work. Surely somebody makes one.

I am looking for an external set that resembles this internal pair. Due to clearance issues I need the 90degree bend and the extra long nose. Everybody sells this style in internal but no one it seems has an external variety. Hopefully someone can help me find what I need.

Fully agree. My cousins kid and shack up have two kids. Wont get married because it would cut her benefits. They wanted to show me their newborn the other day. I said sure since Im paying for it. When they asked what I meant I explained that they had GSBs which is government supported babies...

We use the Kroger fuel points. By shopping on fri. I always save $1 on 35 gallons. I have Walmart + because of Straight Talk phone service. I always get .10 a gallon off. Its surprising how so few people take advantage of fuel savings.

Got this ICON set. I need to change out the A/C clutch on the church van.

Im all for saving so I can spend on something thats needed. I have a friend that is just as tight with money as me. We are always trying to outdo each other to get a bargain. My wife keeps asking me when Im going to get a newer truck. To which I reply why. It suits me just fine. I will price...

What you are calling a habit, some of us call a lifestyle. Everything is paid off and can buy what we want. But by todays standards we are poor. Im quite ok with it.

I have used this brand around the chicken coop. Usually space out two or three. They really collect the flies. I will replace them as they get full.

https://www.amazon.com/terminal-vehicle-instrument-spring-BX2201-2/dp/B077QK2KKR/ref=mp_s_a_1_3?adgrpid=1333708167606659&dib=eyJ2IjoiMSJ9.9tGEwP1SWIkqo3-QpaHobKbmIEprOql2ALlANHGQIHU_Oymr024zDnKOj-svg56CcRGXy_wu7_GyerXqqfhZnW9zEAGXI_K0LMbJY9YMFf74uFEjSdL1U0aZFZI0KPTRPkOFTGaokLxCqnn4GAg10z6Us29lz5-...

I got tunnel visioned on getting the bearing then realized I needed bolts that I didnt have. Finally remembered that I had some steel pop rivets. Now I keep bolt assortments on hand.

Did the same except I used steel rivets to reassemble. Bearing was cheap compared to the assembly.

I have a 5.9 in my 94 Ford 700 and its great. But that being said my brother in law had one of the 53 blocks crack on him.

I was raised up that you never dug against the drive motors. Always dug with the idlers towards the bucket.

You may want to watch this.

Grew up watching the fireballs, from lightning, run the high power lines in our backyard. They let homes be built way too close back in the 60s. One of those fireballs jumped to our transformer and followed the line to our house. Neighbors thought we were all dead. It exploded the house where...

My son’s Mule that he has had since grade school. He is building a home just down the road so when he gets home from work he loads up his ladders and heads out. I borrowed it today so I could work on redoing my shooting bench.

Like what you have done.

They are in the woods behind the house. Very few around our yard. Sounds like thousands of bad throw out bearings to me.

I cut about 2 1/2 acres counting both locations. Mine has the Kawasaki engine.

Gas cap for the Stihl and a primer bulb for the Jonsered chainsaws.

We purchased a Husqvarna MZ54 last year. Lowes had one leftover that I got for about $2000 cheaper than a new one. Plus it had a full warranty and a new battery. The reason I got this model was a friend of mine had the same mower for years and his sons did lawn care after school and summers to...

I didn’t have time for a pic but yesterday as I was going to the diner for lunch I met a four wheeler carrying two mobile home axles sideways on the front rack. Luckily there was a bit of a shoulder to go on and I still barely missed him. He wasn’t going slow at all. This was on a secondary...

When we pulled the bed on my sons 08 Superduty I soaked them everyday a week before we pulled it. Broke all of my torx bits. Got more and applied heat from a mapp torch. Broke those bits. Ended up using a cutoff wheel on the heads. The bolts were not rusted. It was the loctite that Ford had used.

One of my sons co workers took his family to the neighbors basement. The storm almost leveled the neighbors house but his was untouched. Thankfully they were all unhurt but shaken up.

London area is reporting multiple fatalities.

We had a deadly tornado strike south of us in London and Somerset Ky. I hope and pray for all those involved. Hopefully none of our members were in that area.

https://www.vevor.com/s/suspension-seat

Love my lube shuttle gun. No drips easy mess free changes. I use the ep moly.

Are you measuring the tread width or the section width on your existing tires. Tread width is usually more narrow than section width which is the widest part of the tire when mounted and inflated.

https://smartsheltersofkentucky.com/ https://centralkystormshelters.com/ https://kentuckystormshelters.com/

My reply was sarcasm[emoji13]

I remember it being a pain to replace. Glad you got it fixed.

You dont believe that some Chinese company is manufacturing cheap knock offs do ya.

While looking around for bargains at a local return goods store I spotted these. Have no idea what they actually cost.

Im sorry. Nothing I can say will help ease the loss you feel. Only time and Gods comfort can do that. Prayers for you and family.

Loved SkettiOs as a kid. It was about the only thing my babysitter could fix and not mess it up. Had a can the other day for the memories. [emoji16]

Apparently AI doesnt share in my lofty goals. Asked it a few other questions that it gave me the same lame answers. Of course Im probably being flagged by the NSA as we speak.

Heres some AI that offers a more personal experience. https://nomi.ai/

The pickup tube on my 763 broke years ago and it was a pain to get out from the age hardened grommet. Got the kit also and replaced it all, then my son replaced all the fuel lines which were starting to deteriorate.

If you were a bit further east in the state I know a lady who could fix you up. She does rescues. She has helped me and others. Usually no charge for a vaccinated and fixed cat.

Co-op had a line fall and ours was out for 9 hours. I have a small HF open frame inverter. My son has been using it on his home construct so it is getting ran and fresh gas so it fired up and never missed a beat. Needed heat for the chicks in the brooder plus tv and wifi.

Reminds me of when Austin Powers was asked if he had protection. [emoji16]

I have the same brand on my stuff. Been satisfied with them so far. [emoji41]

Our county run recycle center takes appliances. You can check to see if you have one available.

Amen

You mean Atlanta parking lot. I would leave on a Fri. morn from Sylvester GA with a load of peanuts headed to KarNut in Detroit or KingNut in Cleveland. With Atlanta and Knoxville traffic I would make little headway.

Nice tractor. Have a soft spot for the older Fords.

USPS is a joke anymore. Even the local postmasters are complaining about it. They are tired of getting ripped everyday due to late mail. Our electric bill gets to us one day before it is due. So I take it to the co op and pay it. When I asked them why our bill was coming from out of state...

Hate to hear of his passing. He always seemed calm in his postings. I remember him from when it was a Kubota forum. He will be missed. Prayers for his family.

The older Cats only used a key to operate a battery disconnect. You could use bent wire, nails or needle nose pliers.

Years ago there was a company that advertised in Rock & Dirt. Their specialty was supplying ignition and cab door lock cylinders for equipment that were keyed different from the OEM. When I had equipment my son had to have a key for every piece of equipment there was. He was in preschool at the...

Bought a stack last fall for my sons house build. $39 a sheet. Kinda pricey.

Same here. The yellow one self destructed. The red n black one has been bulletproof

Dont know if this is anything your looking fir but I meant to post this awhile back.

Sadly its no more but years ago most of my contractors had Nextel push to talk phones. Worked great for us.

I have been meaning to attend the Farm Machinery show in Louisville the last couple of years but didnt. I have high hopes to make it this year. Always something interesting.

My wife has family in Lafayette LA. They sent these pics today.

Sorry to hear about your power outage. Im probably a bit further south of you and ours was out about an hour. Warmed up and the rain melted most of ours. I do usually plow my gravel drive plus a couple of my neighbors when we have enough accumulation.

Goldie couldnt stay awake to see the new tear in. Flash never phased her. When she sleeps its a coma.

Mine will not fit on a my quick hitch without major alterations. So I have to remove my quick hitch to use it. I always wash it after use then spray with a diesel oil mixture, same stuff I treat the trailer deck. No rust after many years.

Sent you a private message.

Bought a chocolate bar at the Dollar Store. It was one of those donating part of the proceeds for a cause. Wife asked me what the cause was and I told her cause I wanted it.

I found one of those in a pawn shop this spring. I bought it for my son who is building his house works great. They wanted $125 for it but I talked them into $100

Cant help on the relay but I do watch a bunch of the non english you tube vids. Have you gone into settings on the vid to see if it has auto translate captions.

Maybe this will help

Years ago when I did excavation could easily pump through a 10 micron well below freezing but I did treat my fuel accordingly.

No screen on the pickup. The pump came with a hose and I fabricated a metal pickup tube. First filter is a waterblock and the cartridge is 2 micron. It actually pumps faster than Im ready for. Have overfilled a few times. [emoji849]

Kubota makes them. I cant remember the part #. Im sure they have different part #s depending on your model. Yes the cat had to be nosy.

Put some of this in the trans. Makes it easy to see the oil level. Use it myself.

Yes I am pulling through the filters. Unfortunately the tank has some rust in it so I am protecting the pump. It may degrade the gpm some but that’s no biggie for me.

I also have an old Tokheim. I used it for many years, first on a 55 gal drum then on the 50 gal tank I have now. It was my great uncles so I dont have a clue how old it is. I have since upgraded to this setup. Its outside under a tarp while I modify the tractor shed.

In KY if you have an enforcement question you would call the scales where the officers work out of. Calling the main office only connects you with office staff who will tell you to call the scales in your area. Have a family member that is a supervisor at one of the scales and he says to call...

I was looking for oil filters at a better price but most of the time on ebay and amazon the filter pic would be the wrong color or have slightly different graphics. Not wanting to get fakes I went to Zoro and they were cheaper plus they offer 20% off to me all the time and free shipping at the...

I purchased a gripper that has a built in light. Really makes it easier to locate items then grab them. Cant remember where I got it from.

I have the 80 volt Kobalt tools also. Chainsaw Trimmer Blower. I have two 2 amp and one 2.5 amp batteries. They are starting to show some weakness on the chainsaw but run the other tools just fine. I will probably just rebuild the batteries when they finally die.

I thrive on cheap and free. My tractor shed sides are metal that was removed from a roof. I painted it and its fine.

All I know is the nyloc nuts are as tight as ever and it has been 5 years or better since I changed to them.

Same thing happened on my King Cutter. The lock washers broke and left the gap. Pulled the stump jumper and replaced with grade 8 bolts and lock nuts.

Looks like the pull handle from a grease gun.

We were in Myrtle Beach when Floyd came through. No evacuation because they thought it wasn’t going to hit. At the last minute they declared an evacuation. I had already gassed the truck up and had a spare 5 gallon full in the bed. We left as people lined up at the pumps. It was ugly crawling...

We have the 610 mule and at times under load at full throttle it will starve for fuel. Old fuel pump died and we replaced it. Still the same problem. Ive got an electric pump to try.

Nice cat. Was thinking the same thing. My adopted me Husky pup is going to get spayed thats a $175 bucks. Shes happy here

Had couple of kooks for neighbors that I had to go to court and have the judge tell them I was right over a property line. To make it worse my grandmother had gave them the land where they originally built. They have since passed and their daughter and her husband live here now. Best people in...

My wife loves them but with the hot humid weather we have in this bottom the blight gets them fast. I usually grow the most disease resistant hybrid varieties I can get.

Yes. I like how using two gives the top link room to come up. I was looking at using one tool box but the top link would hit unless I had it way high and then it blocked my view.

I think they are called adjusting clamp bolts. Dont know where to source.

Have you checked that your cord is not damaged and that the wire connections are tight. 240 motors will not run at full power if one hot leg is damaged or loose but still allowing voltage to flow. The damaged or loose connection will get hot quickly.

Saw a burnt dozer at the sawmill yesterday. Told the owner that I hoped he bought it for parts. He said it was his sons. They were logging a piece of property that the timber was sold at auction separate from the property. Well apparently the new owners have been trying every legal tactic they...

Sa this in the latest Farm Show paper I got.

Years ago Steve Barlow sold them when he was a Massey dealer also. He only carries Kubota now but he may be able to help. Hes located in Somerset https://barlowequipment.com/ Wes worked for him during that time and has since opened his own dealership of Mahindra and Massey. He may also be able...

We got 3.25 inches last night. The ground was powder dry. Even with that amount there is no mud.

Yeah and Im like what the hell do I know about clothes. [emoji848]

Its not unusual for people that have never had a reaction to stings to suddenly have severe reactions. My son raised bees and getting stung was no big deal till one day it was. He now has an epipen. Glad you’re ok.

Boom, dipper and curl.

$3100 dollars worth of LVLs and I joist. Probably should have posted this in things being hauled wrong [emoji849]

[emoji1303]we got faith in ya.

The proxbid ads are still making a mess of the phone app.

Every ar build except one that my son and self have done used their lowers. Never a problem.

She does nice work. Years ago during the time of the CB craze there was a bedridden lady that used the handle Dolly. She would make elaborate doll clothes and dolls that she sold.

https://www.amazon.com/dp/B07WRXD37V?ref=cm_sw_r_cso_sms_apin_dp_EFE9CXRH5P1TTGMN7HTB&ref_=cm_sw_r_cso_sms_apin_dp_EFE9CXRH5P1TTGMN7HTB&social_share=cm_sw_r_cso_sms_apin_dp_EFE9CXRH5P1TTGMN7HTB&starsLeft=1&skipTwisterOG=1 These are the ones he has. The battery life has been really good.

I purchased my father a set of bluetooth buds due to his hearing. Mom was about to scream because he had the volume up too high. He loves them. Says he can still listen even when he has to go to the bathroom.

https://www.buyyanmar.com/3TNM72-APL_sub0001_3TNM72-APL_001 Yeah a new block aint cheap.

Use to see those all over here in KY. Since they have cracked down on cockfighting you rarely see them.

Everytime I click on what they have to auction I get a Warning invalid url. Cant sell stuff that people cant see.

Most input shafts dont have a drive key they have a shear bolt and a retaining bolt that runs in a groove. This prevents the driveline from coming off if the shear bolt shears.

We use to have a large population of ground squirrels around the house. I also tried thinning them with a pellet rifle. My efforts had no noticeable results on the critters. We got a couple of outside cats. Havent seen a live ground squirrel since. Best decision Ive made.

One thing to remember is that fabric will work and help immensely in certain situations. But if you have a really soft area that you cant or wont fix the water intrusion then you need to put down a geogrid product like Tensar makes. Its not cheap but way stronger. I have used both the fabric and...

I hope that Im wrong. But I would look in the box like D D said first.

I have a similar blade that has a nut on top. I had one like yours before and did the same thing. Backing up and caught a tree root. If I remember right they are assembled then welded. The only option is to torch or plasma cut the index plate loose from the tube then realign it before welding...

I saw that video. Its click bait to generate views so they make more $. Youtube is always putting junk videos like that in the recommended category. I put these in the same group as Game Changer, Will it Start.

Dont forget to check your pawn shops. I purchased this last year with a tripod and stick for $300. A but more than you wanted to spend but really useful.

Ive noticed that road base is called by different names depending on your location. Here we use DGA which stands for dense grade aggregate. If you want to get a high level of compaction then you get DGA that has been run through a PUG mill. This is basically mixing water into the DGA. This...

1. Walmart stopped selling the Mexican melting cheese I like. 2. Ive lost all of my closest friends except one. I fear I may outlive him. 3. Breaking Bad ended before I could figure out his formula. 4. No one realizes how important I think I am. 5. It takes forever to get a white...

Ive had that one for a few years. Been running fine on the kohler.

I have a mixture of bushings and lift pins on my equipment that I set up for my quick hitch. I started buying the expensive ones to slide over a cat 1 pin and secure with a roll pin Then I either used cat 3 pins or cat 2 with a 3 bushing tack welded to it. You have to drill out the mounting...

Picked this up at the old Ruckels feed store in Waynesburg yesterday. Rated for 28 gph. Like someone said if your using that much fuel you cant afford it. I paid $10 for it. Jegs and Amazon sell them with good ratings. Already had the cat [emoji16]

Another vote for on the table. [emoji1303] I like the big orange bow idea.

Wife calls my treasured possessions junk[emoji849] But if I throw something away I need it shortly thereafter. No dumpsters but. My cousin was cleaning out his garage and asked me to come up and see if there was anything I wanted. Wife told me I couldn’t bring anything back with me. So my...

This blue eyed Husky mix showed up around the fourth. She was really scared. Every time you tried to call her she run off. Her and our Lab have become best buds. She will not come to me but she doesnt run from me anymore. It will take time and goodies to establish trust. My wife says she looks...

Should have been much more weld than that. Looks like they didn’t bevel a thing. I would be looking at rewelding the other side also to prevent another break.

Had another Whirlpool side by side lose its compressor this last Sunday. Makes two Whirlpool fridges in the last 10 years. Still have our original GE top freezer in the basement from 98. Our new GE fridge is suppose to be delivered on Aug 5. Apparently white is not in style these days. We went...

Looks good. I have used old bed springs for drags myself.

Same here. Told me I didnt have permission to do that. Never stopped me before but it did this time.

The spanner wrenches they had at the shop I worked for were made by Williams. Dont know if that company is still in business. If all else fails do what we did, get a big pipe wrench.

You need a spanner wrench. Just search ebay or amazon. I think the set above was $62 on ebay. Place it on the gland nut and smack the handle with a hammer. Tighten the same way.

Occasionally a bad batch gets out. Ive seen this with drywall screws. Open a different case and the heads start popping off. Go to another case and all is fine again. Use to help a buddy build decks years ago and we used phillips head. Phillips should have been hung and quartered for forcing...

I think its a shaft and not a bolt. Yes Im sure it can be replaced but wont be cheap. See what brand and model of drive you have and they should have drawings on their website to let you know what needs to be replaced.

What about that a Swedish dishwasher and I thought they were all made in China now.

These days we are labeled intolerant simply because we dont like something out of personal or moral choice. Not liking something is not being intolerant. Telling me that I cant disagree with you is intolerant. Ive done tons of things in the past that I dont agree with now. Intolerant of...

Worked for a company years ago that was the largest in its field. All of management from supervisors up had started lower in the company. Even our Division director had started as a material handler. Then they started hiring management straight out of college who knew nothing about the...

I was also looking for a 10k trailer and went to the factory to see one. Then I saw a 14k with the wide ramps. It was a little over $6000, cant remember exact amount in 2023. Occasionally Sandusky’s in Columbia has aluminum cutoffs fairly reasonable. Ive bought a lot of steel from them.

Yes I like the mods. Ive been toying with some sort of ramp addition so I can load my zero turn. I have a Gatormade also. Did you pick yours up at the factory or from a dealer.

I saw a huge stockpile of TYMs somewhere along the AL GA border when we went to Eufaula this year. Hundreds of them lined up next to a warehouse. Wished I could remember exactly where it was.

I assume the tapered end goes in first. [emoji849]

My wife wishes I would [emoji16]

Wished I had thought of that. Knowin him he would enjoy the peace n quite. [emoji849][emoji848]

I realized I was old when my underwear became less of a fashion statement and more of a filter. [emoji849]

None. Thought about putting Muhammad on it for kicks[emoji12]

Yes a raptors talons can do damage. A great horned owl that was tangled in my fence. One of his talons found the seam in my welding glove while I was getting him loose. Went to the bone, but the Dr. was impressed.

Had a rodent scare myself this week. Came in to fix a sandwich for lunch and the bread sack had a hole chewed in it plus the hotdog buns did also. Crap I havent had a mouse in this house since I built it in 98. Well all things must come to an end so I immediately started putting together my...

Go with the B2150. I bought one used that had been a rental with 1000 hrs. It had a loader on it. They are a smooth 4 cylinder. I put a Kubota backhoe on and commercially used the heck out of it installing water lines, drains, grade work, electric service and flatwork. It had well over 2000...

15 pair of the HF micro flush cutters. To give out at church on fathers day. Old Timers breakfast at Cracker Barrel.

My wife is starting to mumble a lot lately. Ive talked to her about it but she has shown no improvement. [emoji848]

My son has those on his 250. No problems yet but they have wore rather rapidly.

Those tools are just guides and a compressor for the seals so they dont get cut on the install. I have used small engine piston ring compressors to aid in seal installation. Wide zip ties will work in a pinch.

I have a 3650GST so mine has the single stage clutch and access is not good. But the clutch is only used to engage the pto for the most part on a GST trans so hopefully it will last a long time. My shop manual includes your model so ifn ya need any pages let me know.

Dont appear to be a grease fitting.

25 gallons of off road diesel. Diet Coke and a package of chocolate donuts. Dont judge me [emoji16]

Be careful running illegal parts across state lines. They will have dogs trained to sniff out the parts. [emoji30]

Ya gotta love the smell and feel of a new machine. Congrats looks sharp.

Is that one of them gerbil extractors ya hear about. [emoji12]

I always order from Burdens when Im working in a project. I understand the Im down and gotta have it now situation. https://www.surpluscenter.com/

Me, I would have just shot him but I do admire your methods. Accidental death[emoji849][emoji848]

When dad stayed in FL for the winters he accidentally got on a toll road and received a bill in the mail with a pic of his vehicle and license plate. He was guilty and paid it Six months later he got another one, the license number was correct but the vehicle was wrong and the tag wasnt from...

My tiller also has a grease fitting there. I always clean it with a can of carb cleaner before greasing. If you just wipe it off there us always a minute bit of dirt left which will eventually eat the bearings.

Walmart did the electronic keys and programmed them at one time. But most vehicles today dont have keys they have pieces of luggage they call fobs that constantly get their buttons pushed by other items in my pockets. Rant over[emoji849]

Yes you never know until you look. Glad you got it solved. Im with you on the fixing it without paying inflated prices for parts. If your luck is like mine thats money you will have to spend somewhere else.

Lots of rain here in KY. No deluges but consistent precipitation. Probably turn dry this summer. Garden is a joke. May need to put mud tires on the mower.

Search engines never think like we do. They are set up to make money. That is their goal. Finding what you need is secondary to them. That being said I use DDG myself, as for the pin I used a hitch pin on mine when the old one wore out.

I go to RuralKing for bolts. They are quite a bit cheaper than TSC plus they carry metric sizes. Of course if you don’t have a RuralKing this doesn’t help.