Search results

Started the tractor today to go cut some firewood. After hooking up trailer etc I glanced down and seen the hour meter was showing 0.2 hrs and counting! Yay! I've always wanted a brand new tractor! Later when I shut it off and restarted it went back to the correct number (230). Anyone else have...

2601 no question. Only reason to get a bx is if you need something that small for a particular task. The BX tractors are are very capable, but very limited when it comes to loader and 3pt work.

A farm near me had to "depopulate" a couple million layers about 2 years ago. So just being big is not enough. Back to the subject of pricing, I don't think tractor prices have risen much more than vehicles or housing or other large ticket items.

What's the alternative? Make your own? Only so many used units available. Certainly some of us are priced out, but there are still people buying new. Some people will migrate to the lower priced brands. TYM, etc.

Free shipping to Ohio? Just kidding. This is a great deal for someone!

My OP shows a grapple with virtually no sides. Your point is one of the reasons I hesitate to add a grapple to my existing bucket. As well as the fact that it doesn't appear too cost effective in my view. (Approx $1400 for the grapple vs $6-800 minimum to add a grapple and tooth bar to mine...

Do you use your bucket for dirt work as pictured? I assume you'd just leave the grapple wide open? If I went that route I would probably fabricate the entire assembly myself.

I've considered building something like that to make my existing 52" bucket into a grapple. Then buy a 60 inch bucket for light duty hauling (which I should get anyhow).

I'm not too concerned about allowing dirt to fall through. I'm mainly interested in being able to grab onto plies of brush, gripping logs, etc.

I'm considering the purchase of a grapple bucket and looking for input on a solid bottom grapple. Uses: primarily will be used for moving brush, logs, and split firewood. A solid bottom seems like an advantage for me in that I can still haul my chainsaw, gas, oil, chains etc easily. My...

It's no fun to be overwhelmed, so I'll make it easy for you: TYM. Probably the best bang for your buck. Provided you have a dealer within reasonable distance. A 15 or 20 series legacy model would check all the boxes.

I use this style. They release pretty easy unless the socket drawer is left open and collects dust and grit. I like how easy it is to customize my set up or rearrange to add new sockets. (Link below) https://a.co/d/ji7MRBZ

The 2610 offers one.

For the OPs described usage a 6ft would be just fine. My little 2610h runs a 5 footer in thick grass no problem. I often run it in 540E. On a 2515 a 5 footer would barely cover the tractors width. Of course if there are a lot of steep hills, you won't be mowing in high range.

One of my children actually found it on the field lane just this afternoon. One more reason to be thankful!

Huh? Aren't you a "homeowner"?

Changing the engine oil on Saturday I noticed that the cord for the block heater has disappeared. I was pushing a lot of brush into a pile and I'm sure it most likely happened then. I'll take a look around but it's the proverbial needle in a haystack. I assume these cords are available from...

I'm not going to argue about cost of homes or building lots. However, take a close look at the average suburban home in 2022 vs 1980. Quite a bit of difference in sqft, but that's just part of the equation. How much does it cost to build those big porch columns? How much extra does the floorplan...

I've also heard this story from dependable sources. They may have used two speed rear axles or 1000rpm PTO to get higher speeds. The way I heard it some of these rigs could hit 50mph! Not for me.

I don't think a Facebook group is going to give you a very good picture of overall quality or reliability. I've had my Branson for 18 months with zero issues and have not posted anything on the Branson FB group (though I am a member). In contrast, I've left a number of posts on this forum giving...

I might try it at some point to see how I like it.

The BadBoy 1025 is the exact same as my Branson 2610. Only with a better paint scheme. Not sure which TYM is closest.

On my Branson 2610h I occasionally wish I could disengage the auto throttle. I usually run the brush cutter in the economy PTO mode and setting the hand throttle to 1850 rpms. In mid range the auto throttle won't allow full ground speed without also raising rpms above the 540 mark. In high range...

I'm not trading my Branson, but maybe this will push other OEMs to follow suit.

I don't have the app so I don't know how good it is, but I love the idea of a free parts app. If it included a detailed, step by step, English, service manual also it would be simply golden. I certainly like that part of the Summit business model. That and your presence on a forum like this.

Why Are you comparing the Legacy to a 2025r? A 1025r will be cheaper and is still much more capable than a Legacy. The real question is whether you want #1 a grass mower/garden tractor or #2 a real (albeit small) diesel tractor?

Probably the cx2510. A bit smaller than the ck2610. The 2610 would be significantly heavier than your ck20s. Something like 800 lbs maybe?

You must work with Dilbert then?

Two weeks is considered transitory.

Regarding labor shortages: How many teenagers are working summer jobs these days? If half the people who are currently in college aimlessly pursuing a degree for an undecided future occupation would drop out and get the first job they could, that would be a big help. IF they can pass the drug...

Well that might be a stretch then. $240 delivery doesnt sound too bad considering you don't have a trailer. Unless you're going to make the trip anyhow. Do you have straps or chains if hauling it yourself?

Drive it!

The current rule of thumb is to set asking price at original purchase price. Also look up model on tractorhouse.com to see asking price on other used models. 4-6k less than current msrp might be a good place to start.

My preference to orange is no doubt due to the fact that I always expected to someday buy a kubota CUT. I ended up with a used Branson in shiny red. Go figure.

I just recently saw them in person. I would glad exchange color schemes with the Bad Boy equivalent to my 2610h. I'm not a big fan of red personally.

The recommendations for half of loader capacity are good. I've got about 40% of max lift and it's enough for medium loads. Truly maxing the FEL capacity will make the rear light.

Better make sure to have minimum of 600lbs counterweight.

I've got a Branson 2610 which is similar in size I think. My lift capacity is just over 1400. It will lift and move that amount of ash firewood, but haven't tried oak. It will definitely be using every muscle and would make me nervous raising it 3-4 ft in the air. If this is a must for you, get...

No offense, but if you can't smell that as a scam you no business selling anything through Craigslist. No legit buyer sends a letter like that.

A hydraulic remote multiplier looks to be a handy way to add remotes beyond factory options. It's basically an electric diverter valve.

I agree it is ironic. Yet it's also true that minimum wage is at a RECORD HIGH. that means everyone making minimum wage is getting rich, correct? What percentage did these profits increase? Then compare that with the increased cost of building a new factory or purchasing some oil drilling...

I installed a CSV1A near my pressure tank inside my basement. Been using it for 10 months now. It works exactly as advertised. I've got a 40 gallon pressure tank so I still have some variation in water pressure, but for extended usage like running a garden hose it stays at 52 psi for as long as...

It would be nice if the OP would visit again. Is a large old backhoe what he's envisioning? Or a newer SCUT? or?

Ignore the advice for 40 plus horsepower. That's going to be extreme overkill on a 3/4 acre lot after the initial work. Instead shop around for a used Kubota BX series subcompact or a similar brand. You probably won't get one with a backhoe for that price, but you're better off hiring or renting...

Just paint them red like the late model Bransons.

The They aren't. But the eggs from a backyard flock will almost always have darker yolks than store bought. Especially if they have access to grass, bugs, sunshine.

I also purchased the FF spray gun with extensions. It seems to work good. I may check prices on getting the prefilled plastic bottles of woolwax next time though. It is kind of a hassle to refill the quart bottles when doing more the one vehicle. I placed my 1 gallon can in a 5 gal bucket of...

I coated the entire underbody and inside all rockers, doors, etc on my Ford E350 van and used a gallon or maybe a little more. Also coated my Dodge Caravan. Used less than 2 gallons total.

I've been using leftover or discarded wax candles. Melt them in an old skillet and pour the wax about 3/4 inch thick in some kind of container. Add as much sawdust or wood shavings as the wax will absorb. When cool enough to handle break it apart into whatever size pieces you desire. Garage...

The article didn't mention bird flu, but that's very true. We live about 2.5 miles (upwind) of a 4 million bird laying facility. This past summer/fall they had to 'depopulate' all the barns because of bird flu. It raised quite a stink in the community! During that time period the number of...

I'd much rather pay $10 for milk than gas.

I'm thinking there is a limit of 10k per day on such transactions though. May be wrong though. Edit: 10k per transaction, but can do multiple transactions though. No fraud protection on vehicle purchases.

I think you missed the context. A dollar now, only buys what 80-90 cents (or less) would have bought last year. If the US dollar has 'gained' value compared to Canadian dollars it just means that its worse up there. We all understand the point you're making and it's technically true. But reality...

More likely an ice cream plantation.

Why exactly does the EPA not allow replacement parts to be sold for this engine? It was emissions compliant at the date originally sold, right? What other engines are they killing in this way?

Tractordata was visited regularly by me over the last two years of tractor shopping. I really liked that most of the listings included loader specs. I pretty much selected the (kubota) models I was looking for based on tractordata's numbers and pictures online. In the end I found a Branson I...

I heard from one person (who imports containers of outdoor furniture) that the costs for shipping a container went from 5k pre-covid to 22-25k last year. Currently said it's around 7k now. His feeling was that the customer will eventually see prices drop but will take some time. I'm not...

I'll need to crawl under the tractor in the daylight to inspect more closely, but I'm not sure there are any flat surfaces large enough. Most of the heaters are 4x5 inches. May need to check out the magnetic heaters or maybe a dipstick heater.

I just now noticed that this somehow got put in this thread. It was supposed to be in the thread about "who makes their own hoses". Not sure what happened. On the crossover valves....I put one on my ssqa plow and after plumbing everything up I could not get it to cycle from right to left. I...

Do they require a flat surface or can they be applied around a corner, curve, etc?

I'm curious if anyone else with a 2610 has found a good way to preheat the transmission. I've checked out the silicone pad heaters but not sure if there's a big enough flat area on the transmission to place one. (I've already got the engine block heater. )

My local Napa store makes hoses while you wait. Certainly not cheap, but handy. For a recent hydraulic build I ordered custom hoses from Made to Order Hydraulic Hose Assemblies | Discount Hydraulic Hose they offered a pretty good variety of hose ends for a pretty fair price. The shipping was...

You can't see the appeal of a 4x4 lawn mower with FEL? You must have never pushed a wheelbarrow around on a 1 acre lot. Pound per dollar a larger tractor is indeed a 'better' value, but may not be needed for some users.

Does the winch drag the tractor around any? This may be something I would build in the future.

That was part of the reason my dad quit his job as a Ford mechanic also, but in his case it was ?20? Years ago.

The L2501 is a very basic tractor indeed. But it's still a very popular model. Some people are drawn to the Simplicity and even the standard gear transmission. The reason Kubota sells so many is because of their reputation.

Here in the states you could easily pick up a similar machine with FEL for that price. Maybe even a few attachments as well. In US dollars that is. No idea on the exchange to AUD.

Also explains all the various colors of wheels at the end.

I had earlier estimated $600. Then i decided to add the crossover relief valve. I've got approximately $600 in it at this point, but still need to pay my dad for the plow itself and use of his welder.

Finally got everything done. Only had to reorder a couple fittings. Would probably use slightly different fittings if I had it to do over, but I'm happy. I only ran lines for the 3rd function so far. I don't have a need for rear hydraulics at this point so just have those 4 ports plugged for...

Finally got the snowplow all finished. It turned out really nice, but over budget naturally.

That's funny, my $ has has been going down fast for 2 years. Doesn't matter which way you figure it, the bottom line is i work as hard as ever, make more than ever, but it still takes more hours to pay for the same thing.

Perfect! I thought that might be the case.

Got the valve mounted in place, now I can measure hoses and order fittings. Is it possible to reverse the end of the ?spool housing? (In the picture below that would make the handle boot point down. ) that would really clean up my install. Hope you can make sense out of that.

Looks like I'm on my own here......definitely not standard NPT. Looks like BSPP.

Sky hook for sure.

It looks like a 2010 in the pictures, and this phrase proves it!

That is sort of difficult. This spreader actually does a good job of spreading. I ran it about half speed. After 5 loads I used the bucket to push it into a better pile. Id love to just have a spreader without the beaters. It could double as a firewood hauler. My neighbor has another dozen...

Using my dad's old spreader to haul in some rotted horse manure. I'm just putting it on a pile for now. Will eventually get transferred to the garden.

I'm trying to add a 3 spool valve connected to the power beyond on my loader valve. Can anyone tell me what type of fittings are used on this? It has an adapter threaded into the valve outlet, then a 90 degree swivel that appears to be 3/8 or 1/2 inch pipe thread. I want to be able to hook on to...

I set my budget at what I could comfortably afford to purchase with cash. I look at it as a lump sum that i will not have to pay again. The occasional repair and routine maintenance are pocket change compared to the value of being able to maintain my acreage, plow snow, haul firewood, etc, etc...

That's how I understand it also. How many threads do you see come up where someone is comparing kubota to some 'other' brand. One of the 'pros' that almost always comes up for the Kubota is the 0% financing. Makes me wonder how many they'd sell without it.

shredxcam said: John deere 9series. Probably go with duals all around. Maybe triples if you mow a lot For sure you would want all tires filled with rimguard too. Those batwing mowers pull hard, and besides, how often does a tractor owner say, "boy, I wish I had less traction!"

My tractor has very similar PTO hp as your B2650 (18.5hp). It handles a 5ft light duty cutter very well in light mowing conditions. In tall, thick grass (4-5 feet) I do have to reduce ground speed, but it still mows fine. I've been surprised at how much it will mow in the E540 gear (790rpm). Of...

20k is a good price. IF you want the backhoe. You should be able to get a new cx2510 for around 20k, maybe less.

Almost finished. Made a crude box out of some pvc deck cut offs. It fits down over the concrete and is secured by the top link pin. Chainsaw scabbard is rather sloppy, but I'm expecting an updated version in 5 years..... Now....is it firewood season yet? Wish I would have cast a large D ring on...

Getting ready to order some of the valves and things for this project. What size flat face couplers are considered 'standard'? I'm assuming 1/2 inch body?

Most of my heavy lifting will be done in tight areas. I built this ballast box for around $100 bucks. I'm not buying a box blade until prices come down or i find a used one. Also, this way when cutting firewood i can hook the trailer on behind and still have the weight for extra traction after I...

You won't regret going with the B series vs BX. However, it sounds like you'd be fine with the BX for your intended uses.

Sorry, these didn't get uploaded the first try. All the metal parts are welded together except for the top chain hooks. Planning to build a plywood box on top yet to hold chains, gas can, oil can etc.

Finally got the weight poured yesterday. Will wait another day or so to try it out, then paint the metal parts (should a done that first). Weighs in right at 600 lbs. Center of gravity is about 2 inches behind the pins. I've got a 2" receiver embedded in the concrete also. Fabricated an extended...

With all these good suggestions I'll need to increase my budget for hydraulics! Oh well, I'd much rather buy a $100 crossover relief than (possibly) deal with a tweaked FEL or broken plow.

Got two new cylinders for the snowplow. Planning out the hydraulics for the plow and tractor. I'd like to include a flow restrictor. Will a restrictor on only one hose create the desired affect for both? Or do I need a restrictor on both?

Maybe I'll just get it through them. They definitely show more info.

Do all hydraulic valves have a power beyond port? I've seen where some specify it, but the cheaper ones I'm looking at don't say one way or the other. For example this valve: Mophorn 3 Spool Hydraulic Control Valve 11GPM Hydraulic Directional Control Valve Double Acting Hydraulic Valve for...

True enough, but 'more options than any other' is their main advertising point. Extra hydraulics can be added easy enough, but not more gears. That aside it looks to be a nice unit. Very heavy for its size if the specs are correct.

Standard 3rd function and remote, but only 2 speed hydro?

Do you still like this setup?

That's basically what I'm looking to accomplish. I'll probably use a 3 spool valve and eventually run lines to the rear for 2 remotes. My main goal at this point is to gain the 3rd function for operating a snowplow.

That's what I'm aiming to do. Great info. I'll mostly be plowing gravel areas, but also a couple concrete garage approaches. The plow probably won't clean the concrete as well as my current garden tractor snowblower, but should do it much quicker.

I remember seeing where another member added an additional 2 spool valve right next to his loader joystick. Think it was on a Kubota, but doesn't really matter. I'm thinking of doing the same on my Branson 2610h. I could not find the thread where this was mentioned before. Can anyone point me to...

Most of the tractors I bid on went for fair prices. But if I'm buying sight unseen and need to pay transport fees yet, it needed to be at least 15-20% cheaper for me to really be interested. There are good deals to be had if your patient.

I bid on a number of used tractors over the last year through equipmentfacts and auctiontime. I didn't win any tho. My dad has bought several items this way. I had no complaints.

Thanks for the input all. It's a long time til I'll need it, but these projects sometimes take me awhile. I don't have my own welder, torch, or plasma cutter so have to work on it when my brothers shop is available. I'm no engineer but fabricating this shouldn't be difficult. I'm pretty green...

No. I seen a used one of Marketplace for 1100. I'll have a few dollars in paint, 160 in 2 new cylinders, similar for hoses and fittings. Approximately 150 in steel. All said and done I should be around 5-600. It sounds like a fun project. Also will need to add the 3rd function on the tractor.

I've got an old Western snowplow model 60214 (6'6") that I want to convert to a SSQA for use on my tractor. The plow is in good shape, but the cylinders are not. I had to cut the pins to get them off. Not sure if they are worth rebuilding? How do I know what size cylinders I need?

Then you are working the system to your advantage. I'll wager that not many Americans under the age of 40 are managing their money that way.

You are choosing a wise path. Keep it up! Exactly. Far too many people only look at the montly payment cost. Getting the heated and cooled leather is only a couple dozen bucks a month, so it's considered a cheap luxury. They forget to multiply by 72, 84 or whatever the number of payments. So...

So the Branson line will still exist, but just be called TYM? Black-grey wheels? Must be a translation error. Unsure if I should be quickly selling my 2610h or rushing to order 3 new ones before October. Ha ha!

Kioti seems to be a little better established in the US market so that could be a plus. Especially with the possibility of the Branson name going away. Which one has less electronics? I'm betting the Branson. I'd go with the 2515h for myself, but it's your call.

I purchased a tractor 5 hrs away in another state 2 months ago. Private party sale. No way was I going to tell a total stranger that I was arriving with $14,600 in cash. He was willing to take cashiers check so that's what I did. I use a small local bank so doing the withdrawal at another branch...

My grandfather had a 5045e. He built his own cab for it using plexiglass, 2x2 lumber, and plywood. It was designed to be removable for summertime. No heater, but it was still comfy in cold weather. Needless to say it wasn't the prettiest cab around!

I'm just going to enlarge the holes in my fork frame. If I borrow or rent other attachments in the future though that won't be an option.

Ive got a Branson 2610h, with BL110 loader. I ordered a ssqa pallet fork frame on Ebay and installed some used forks I found on Marketplace. After putting it on the tractor I discovered the latching pins on the tractor are too close together. I can latch one but not both. I need to measure the...

It basically just serves to keep the plates aligned and spaced while being installed. If it's welded continuously it would provide just a bit of reinforcement.

It's kind of funny. In every thread of this type the lesser known brand promoters (for lack of better term) always point out the better lift capacity, options and price. Kubota guys (or JD) always harp about parts, service, resale, etc. If kubota or JD had best in class lift capacity, chasis...

The old gassers are usually pretty reliable and easy starting. The diesels of that era weren't that great and started hard. Unless they were rebuilt with better pistons, etc. They definitely don't have the torque of a diesel though. Do yourself a favor and replace the distributor points with an...

I already have fluid filled rear tires. Just moving dirt or hravel that is sufficient. I want some additional weight that I can put on, mainly for when I use pallet forks or possibly a grapple in the future. I want to gain some stability at near max lift, but mostly looking to save the front...

I'm looking for some input on building a 3pt ballast box for my Branson 2610h. My first, and main question is concerning how heavy to make it. I plan to make it out of concrete. Simple rectangle/cube shape. Weight will be centered at or just behind the pivot ends. My tractor is rated to lift...

There was an Ls model I looked at recently that had the loader valve mounted down low in front of the platform. It had hoses sticking way out the side. The whole works could have been knocked off by a stump or something. Don't recall the model though. 25 or 30 hp. I was just kicking tires. That...

2610h with (borrowed) 60inch tiller.

OK, I'll check for some. Thanks! Does branson offer the gray as well?

I'm looking to paint a few (custom) things on my 2610h. I searched here and FB, but couldn't find where anyone mentioned it. There are plenty of recommendations for red, but not black/gray. Not close to any dealer, or I'd try there. Rust-oleum is my preferred brand.

Here are a few pics. I got some limestone delivered for the driveway today. Spent a little time smoothing that out. Hard to accomplish much by just backdragging though. I'll be getting a box blade in the next couple weeks though and can grade it better them. I really like the tractor. It's a...

He didn't say exactly. He mentioned that his job has him working away from home more.

$14,600. A new machine would have been 18-19k plus tax. I feel like it was a good buy, but not a steal. Only has 43 hrs. Previous owner needs to send the owners manual and other papers, but it should still have some of the 2 yr warranty left. Plus 4+ years of the power train warranty.

Got the tractor home safely. I drove 287 miles one way to get it. Didn't get home til 11pm. Will post more pics tomorrow or sometime since I didn't take any others yesterday and no time today. The tractor is splattered with mud and kinda dusty but seems to be in good shape otherwise. Now the...

If everything goes as planned I'll be picking up a lightly used Branson 2610h tomorrow. After some more researching I decided this is the size machine I want. More capable than a SCUT but not so big that it becomes unhappy for small tasks.

That's pretty much what I've concluded. If bigger tractors were cheaper, it might look different! For myself I think the main advantage of larger would be FEL lift height and capacity.

I don't own a massey. Sorry if my post implied that. I'm only curious if it would be cheaper to add a new FEL to a used tractor vs buying a used tractor and FEL.

For those who advised keeping the 2010 or wondered about the 3pt hitch: do some research on this site. You'll find that these tractors are pretty much a hopeless case. I'm content to use it for now since it's all I got on hand. Like my brother has said: "the only good thing about a 2010 is that...

Some of you commented on my post in the General Buying And Selling. I've been looking at prices locally. There are quite a few GC series tractors that are plumbed for FEL but only come with MMM. I couldn't seem to find any prices listed for just a loader. I could easily do the install myself...

Thanks to all for posting. I'm not trying to buy the biggest tractor I may possibly need. Some of the posts seem to imply that a 50 hp tractor can do everything a SCUT can, but not vice versa. That only tells half the story. I'm going to keep looking for a good deal on a gc1705/1715 or gc...

Good advice. I made a list of all the tasks I would use a tractor for. I then put a rating of 1-5 for each task on how well a SCUT or CUT would work for that. The SCUT scored 93, CUT scored 84. They both had one zero. I'm curious to hear from others who "bought too small" and later traded up...

Oh the engine runs beautifully! Everything else not so much. The loader is nice, but 2wd with no diff lock makes it kinda helpless at times.

Somewhere on this site I've read the following (true) observation: "A good 2010 can't be broken, and a bad 2010 can't be fixed." LOL! It also leaks oil in many places, and tires are wearing out. I'm not worried about a few tire lug marks or grass torn in places. We've got pretty heavy clay soil...

I'm well aware of the difference in weight as compared to a 2010. How practical is a 5,000 lb tractor for doing small jobs tho? That's kind of where I'm at right now. But I have some questions that still need an answer... The common advice to visit lots of dealers, test drive, etc isn't helpful...

Obviously a big draw for a SCUT is that it can be used around the yard and buildings more easily. (Instead of my wheelbarrow!) No one has addressed my question of soil compaction/cutting tracks. If I'm only moving mulch, will the small tires of a SCUT give me better results vs larger tires (and...

Already have zero turn. 100 hours may be exaggerated. The point being that I would use a SCUT for twice as many tasks as a larger tractor.

As if there aren't enough of these threads! Sort of an old question I know. I've been eyeing a newer tractor for a long time. Was hoping the market prices would correct themselves, but it don't look like that will happen soon. I own 18 acres (no hills). 2-3 around the buildings, 10 acres field...