Search results

I won't comment on wood posts as when we put in our horse fencing (now with Cattle in some of the paddocks), we went with 3-rail PVC from Gardner Fence. It has worked fabulously for us - here in MN. We have about 4500 ft of it with 10 gates. we do run electric in the pastures - which does a...

I’m really pleased with my JD unit. Built like a tank and enough power to mulch/cut anything … plus speed, too!

I live on acreage - trees aren’t that plentiful, so I don’t get overwhelmed…. However, there are still enough to be a pain - so the mulch kit is a real wonder! I use a blower to push anything in the landscaping into the grass and then boom, they go bye bye. ;) I would alway recommend one of...

Actually, we went to Idaho to bring back a Puppy that my daughter bought. It was a great family trip going out there.

Sounds like a heck of a time…. But at least you got it done and in. My front axle is working like charm so I’m very happy with everything. Together with solving the gel’ing issue that we had when we hit 35 below a month back (darn fuel filter mushed up), things have been good. Whiteout’s...

My rebuild of my front on my 4700 should last me - but I plan to be diligent given what I’ve learned about continuing to change the fluid and monitor the pressure in the unit. I’m fortunate to have two folks who are related in the family now that are diesel mechanics and have both worked on...

That’s great news, @logcabin ! That will save a ton of money given that all works well for you. I look forward to hearing your results when you return from Montana - have a nice trip to see your daughter!

I changed my oil as well when prescribed by the manual. But in my case it didn’t help. I hope things work our for you!

I have about 2800 on my 4600. The cost to take apart the axle unit, replace seals and bearings, etc., was about $1400 at the dealer. My daughter’s boyfriend (a implement dealer mechanic) took the axle unit off and delivered it to the dealer for the service. I know it would have been more...

This would be nice to have. I just had my front seals and bearings replaced on my 2000 4600 unit. The dealer said that he was surprised I hadn’t had it addressed sooner due to age, wear, and # of hours. And mine wasn’t a slow issue either…. One day it was boom and I had leaks on both ends by...

I picked up the repaired front end axle on late Friday afternoon. They replaced all the seals, checked the axle shafts, etc., and replaced the fluid. It took about 6 hours and several extra days as they had to wait for parts to come in. It is now installed and running very well! Just in time...

Thanks. John Deere reviewed the axle today and is going to replace the seals at the beginning of next week. I will talk to them about keeping the dip stick loose so it can deal with the rise in pressure…. They also told me that the bearings should also be replaced as over the years, the...

My JD4600’s front axle is leaking through the seals on the point where the driveshaft comes in and also at the ends of hubs (wheels). My local tractor mechanic indicated that the seals need to be replaced (the tractor is 25 years old) and had been leaking a bit in the past from those areas...

That is what I did as well. My 4600 had it’s hour meter go bad 2 years ago. I replaced it with a new one from JD and all is fine… I just need to add the hours from the prior clock when I do my calculations for service (I keep a digital log of everything). -Bob

Sounds very similar here. I’ve never had issues in the past using Diesel and Gasoline treatments…. And I believe by running the engines that it helps everything stay consistent. I just figured that I’d check with some of the other folks here on whether this is still a good practice. The good...

I’m questioning whether I should add Fuel stabiizer to my ZTR and X330. Right now I store them in my pole barn - batteries and fuel still in them - for the winter. Thoughts? Should I add Stabilizer and use battery tenders? I do turn them over (as well as my B) weekly. Thanks!

Ah…. White Christmas. A classic!

I thought about that, too, but we’re in behind a hill so they don’t blow too far…

I did. It didn’t work. I’m going to try again this spring.

You’re not old. You’re cultured. I am, too, as I prefer them to today’s singers in most cases. “….the green, green, grass of home…”

Ok.. So, then this is an older tractor than what I was originally told. The tractor was my Father’s Uncle’s tractor that his daughter had refinished and I purchased it to keep it in the family (I can still remember when I was little and I could stand in the tires). I’d love to get a serial #...

Sometimes people just listen…. but the path to success is figuring out how someone else is having success, copy, and then innovate beyond that. :-).

Congratulations on being able to figure it out. I have a JD B that we believe is a 1954. The SN tag was painted when they restored the tractor. I can’t figure out what the SN tag says and we’ve tried quite a few things to remove the paint so we can see it - so far, it hasn’t been successful.

Honestly, I should have a ZTR with a mulch kit a long time ago. In the spring I’ll give it a final mulch and then take the kit off.

I would.. but it has been snowing. :-). I’ll get one, though!

No. I ordered mine through aftermarket. I did notice at the dealership that the smaller model on the floor did have one, though.

yeah. I used my blower to make the piles smaller and/or also blew them into the pasture. Regardless, it worked fabulously…. I should have had this along time ago.

The deck lift works fabulously. Very easy when I need to lift it if I’m going over something or getting ready to drive to the shed. The suspension doesn’t beat me up at all (and my lawn is bumpy in spots). I do have the upgraded seat and it is quite comfortable. I did have an issue with my...

I’ve mulched two times now with my ZTR and the mulching kit installed. WOW…. What an amazing result from doing so. I’m very happy, my lawn looks wonderful, and I only have to use my blower to get clear out the rocks before I cut. What a difference!

I bought the mulching kit for my Z930 when I purchased the mower earlier this year. My goal was to mulch up leaves in the fall. Well, I have used the mower twice since putting on the blades. Needless to say, it does a FANTASTIC job and the remains of the leaves are next to non-existent...

makes sense. I just figured they would give me a discount when everything was bundled together. :)

Thanks. I'll look into that. -Bob

No kidding. I think I’ll be seeing my eye doctor soon. 😉

My wife looked and saw the decimal point. I guess my eyes must be getting bad with age. 😉

Ok. I’ll check and also refer to the owners manual. Thanks!

I find it very hard to believe that I have 110 hours already on something I’ve driven only a few times. 😉 That being said, it is very hard to see it - it blinks. Thanks!

On my new Z930M, the right joystick seems to be too over controlling (at least in my opinion). For example, if I’m driving a straightaway I cannot push the right joystick all the way forward (when the left is all the way forward) as it will push the mower to the left. This reminds me of when a...

I looked and did not find one. I will check with my dealer. Thanks.

I’m looking for a kit that includes oil, spark plug, and filters for my Z930. Although I’m early, I figure I better get one so I am prepared. Thanks!

Well, did my first legitimate cutting of my yard today with the ZTR. WOW. What a difference it is in comparison to the x320. And to my 4600 w/ the 72” inch finish mower. I should have had one of these a long time ago. Thank for all the pointers and such! While I can say that it will take...

My wife doesn’t cut grass. But she is a gourmet cook so I’m happy with the trade off (I’m only good at pizza..). I’m excited to see how the new mover navigates the bumps and other items. I am a tad bit nervous though as we do have one area that is a steep angle that I’ve had to cut with my...

Our trees shed like a horse losing a spring coat so I know what you mean. It makes for quite a pile in the burning pit regularly. This weekend I’m cleaning out my pole barn and getting everything back in shape for parking the ZTR next to the JD B, 4600, and the other stuff. I’m appreciative...

I have been blessed with longevity on my machines as well. The service kit from JD is worth the investment and easy to do.

I have the deck lift on the unit I bought, so I’ll be using that to lift as I go. Thanks, though!

I agree on the maintenance timing. I usually get the maintenance kit from JD with everything in it.

I'm hoping for the same ROI - for sure. :cool:

Thanks for the insight. I don't know what my hours will be - yet - but I'm sure it will be less than it was for my X320. :-).

This is quite a checklist. Did you get it from the manual? I’ve bookmarked it and will definitely look at doing this myself. I do my own work on my JD 4600 and JD B and enjoy it. I might have to check my ramps though as I don’t know how reliable they are (they are quite old). Thanks for...

Question on Servicing…. Do the folks here do their own service/maintenance?

Problem resolved. Apparently a fuse was corroded (from sitting on the lot - the cover was bad) and now things work great!

I’ve just started to use my Z-Turn and it will take some getting used to when it comes to speed. My yard is a bit bumpy in spots so rather than going too fast, I’m taking it slow. I also have alot of obstacles (flower beds, etc.), so I’m thinking that until I’m really used to the turning...

Thanks for the feedback, folks!

Argh. I had my delivery this week and unfortunately the raising/lowering of the deck would not work. Tech came out, looked at it, and needs to take it in. Puzzling…. You‘d think they would have checked that before they came out with it. I’ve never had issues with this dealer - so it is a...

Yes, this is the Heavy-Duty model. It has also been converted to work with an iMatch setup.

Thanks for the insight. Now I need to figure out the current going price for a BoxBlade (new/used). -Bob

Folks - I’ve come across these products and I’m wondering what is a fair price - and I do mean fair (low-balling aside) - for them? The owner has indicated that both are roughly 20 years old - but are kept well overall. Thanks in advance for your thoughts on this. -Bob

Can't be any slower than a lawn tractor at full RPM (loud as hell) putt-putting across a 5-hour grass cutting chore....

My JD dealer advised against it. He indicated that once you put it on it can be a costly repair to it if something goes wrong. if you have a way of getting under and putting the kit on, then it is a cheaper alternative.

I'll keep that in mind after putting it on. If it does the job, then why change. Clippings make good fertilizer. Thanks!

I bought the kit vs. the mulching deck as the components are not removable on the deck. I had figured I would use it in the fall when I have leaves to mulch.... but I guess that depends on how things progress. I'm just surprised by how fast these things go. wow.

It's my first Zero Turn and I'm transitioning from my riding mower (X320). I also bought the mulching kit to help in the fall. Thanks!

I just purchased a Z930R for my property. I don't have much in the ways of heavy grass/hills so this should be sufficient. Any gotchas on driving/handling/management that you can share or point me to? Thanks!

I just purchased a Z930R for my property. I don't have much in the ways of heavy grass/hills so this should be sufficient. Any gotchas on driving/handling/management that you can share or point me to? Thanks!

you forgot Andy Williams, Bobby Helms, Glen Campbell, and Gene Autry! Yep. When the Rankin and Bass shows come on it is always fun to see people look at those as "NEW"... :-).

Yes, that is what I was referring to. Thanks.

Ok. I was just curious. My 4600 sits in my Pole barn so it doesn’t get the weather (other than the cold) and I use my hydraulic heater to warm everything up before I use it. Thanks!

I’ll amend this - they are synched. When one is pushed in one direction the other moves back in the other direction. It has been that way since 2001 when I got the 4600.

General question - I’ve always had behavior where the two loader attachments would move as others have described. I’ve always thought that was normal and haven’t had any issues. Is there a maintenance interval or things to look for to verify that there arn’t problems? I keep everything...

You make an important point that I think others have glossed over. Availability of parts and repairs. When I bought my 4600 in 2000, my B in 2013, and my garden tractor in 2010, i paid attention to that. I also bought commercial. I have not had issues with the more recent units and the B had...

Sounds like the gas tank size is an issue. Is it enough of an issue to want to spend money on the more expensive diesel Fuel? And if you do, would you burn off-road vs. regular #1/#2?

Thanks. I’ll review those. It looks like a R model is the way to go over the M, though. Do all models have their own PTO, too?

Thanks for your feedback. I have more and more leaves in my yard yearly and I also get a bit of unregular growth of the grass that (we live on a hobby farm) means more clippings. I’d prefer to have something that mulches and helps grind that stuff up. I do plan to fertilize this year and i...

Thank you for all of the responses! Much appreciated. I am looking at the commercial units - primarily the M series (not R - I don’t need Diesel). Yes, they are expensive - but the value is there for sure. The extra steel in the deck, the upgraded seat, and the ROPS for lights, etc. All...

I’m looking for some good reviews or threads on JD Zero Turn mowers. Any suggestions? Thanks! -Bob

I’m looking for some good reviews or threads on JD Zero Turn mowers. Any suggestions? Thanks! -Bob

Unfortunately the bulbs do not work. My lights in my ROPS are halogens.

That has worked for me on my 4600 as well.

Ok. I plan to do the same. Having the extra light in the winter will be a big win - that it won’t drag down the battery if I leave them on without the engine running.

You. I read your message that you didn’t change the headlights.. rather, only the ROPS-mounted lights.

Update: I ordered the bulbs and will put them into the ROPS lights that I have. Question - why didn’t you put them also in the headlights on the tractor?

I'm sticking with tubes for everything. Even the tires on the Gorilla carts, etc.

I've been lucky... not too much in my pasture areas when cutting. But I did do some work at a neighbor's area in grass that was at least 3-4' tall... I found all kinds of things with my FEL. Dead Trees, Dead animals, a barrel, etc... and she SWORE there was nothing in there. :cautious:;)

I'm happy with the process that was used - plugging first and now with the tube. All is working well and I've also enjoyed reading the posts/follow-ups here. Good knowledge for sure! Thanks!

Great stuff. It is my go to for my fuel and oil treatments …. And rates right up there with TriFlow for all other lubrication items!

Ah crap. I forgot that valve. Looks like someone decided to play a game with me on it. :unsure:;)

It’s good to hear that JD stepped in. You went through a lot with this whole deal and the fact that the dealership took it hard on the nose, also says a lot about them. I’d be doing a nice reference for them for sure!

Question - I saw on here were someone was having issues with their 3-pt arms not raising (or raising too slowly). Mine seems to raise fine, but is slow lowering (even with weight on it). Is this normal? Thanks! -Bob

That’s great news! Congratulations on getting it done and having it work so well for you! -Bob

You fellows are having too much fun. At this point, my tire is working fine. Thanks for the feedback and support!

That I don't know. I would have to ask.

I'm not sure what you are referring to.

Yes, I do. It was fine. My fronts are R1's... They match the specs that were on the JD 4600 for the first 20 years that I've had it. Unsure. They did indicate that the plug was still intact. I've had not issues with the tubing of the tire since and I have loaded about 35 round bales and...

Thanks. I didn't think it was an issue.. I just hadn't seen any mentions in the past or in other postings. -Bob

Some time ago I managed to puncture my front tire (through the tread, so it could be repaired with a plug). Last week I had a situation where I was losing air in the tire and couldn't figure out why. The tire dealer told me there was a pinhole in it and they needed to tube it. I had that done...

It is the Brake (for both wheels simultaneously). There is also a lever that you can pull straight back that locks the brake in place for parking purposes.

Ok. Good luck with the situation! I hope it continues to move in the right direction for you.

So is all running ok now? (Or did you tip over after you got the invoice from them?) -Bob

Yikes! We’ll keep our fingers crossed for you!

Any news?

Hang in there, my friend. For those of us with that line of tractor (mine is a 4600 - 23 years old), it’s good to understand what can happen. Good luck!

When I had my issue, it was with the linkage below the pedal that caused the problem as the wear/tear over 20 years caused it to not return the pedals to their normal positions. I could get acceleration if I reached down and pulled the pedal up myself, but otherwise it required repairs to all...

I had to take mine to the JD dealership as well…. Fortunately - much like when the roller in the Transmission went out (shift roller had to be replaced), I had it down at the dealership ready for them to look at it. They fixed it for me and we went from there. While I do my normal...

I’ve had the same issue with my 23-year old JD4600 HST. In fact, the external grommet linkage on the pedal broke. Once that was all fixed, then everything was back to normal. I will say though, that this -60 Windchill and snow did manage to make my front loader cylinders make some noise for a...

UPDATE After staying clear of the situation for a year, I returned to it and tracked down a set of Carlisle’s through Amazon that are a perfect match. I got them just in time, too, as the snows and cold in Minnesota set in and the traction has been a great help. Merry Christmas, everyone! -Bob

Hmm. Ok. I’ll check with my JD dealer and see what can be done on cross-referencing a bulb to a LED version. They should know.

Ah. That’s great news. I have two on the ROPS facing forward and will replace those first. I’ll have to see if the headlights on the 4600 can be replaced with LEDs, too. Anyone know where I can get those? @fidowanttobe, what headlights did you get for you ROPS?

I view the whole concept of Green costs more as a prejudiced opinion. Yes, I can buy cheaper…. But having parts available, repair facilities, and other items for as long as I have my tractor (never mind the 3rd party aftermarket or the wonderful folks on this forum), the extra money is worth...

To replace the lights, do you need a different power configuration? Or can I just wire the new bulbs and plug them into the old wiring?

I have a JD4600 and I’m wondering if anyone has done this or not. Is there a kit to replace the ROPS lights and the headlights? Thanks!

I was impressed with the Amazon pricing, free shipping, etc. Made the process very easy for me.

After 22 years and over 3000 hours, I finally replaced the front tires on my JD4600 tractor. I was a bit concerned as the JD dealer said they didn’t deal with it and suggested that I talk to a local tire shop. I did this 2 years ago during the pandemic and was told that tires were unavailable...

Thanks. I'll have to look them up!

Thanks. Anyone know of a reputable dealer in the Minneapolis/St. Paul area? -Bob

Well... after 21 years, my front tires are worn enough where I'd like to replace them for better traction this year. These are Goodyear Turf Tires - 27x12x15. I've called my local JD dealer and they don't deal with them - they suggested going to a Tire company. I have talked to one that...

I知 curious - my 4600 seems slower when driving forward in my fastest gear. If I shift between them, everything seems normal but it just seems that it is slower. It doesn稚 slow down under load - it just seems like it runs slow. The tractor is 20 years old - can the HST pump go bad over time...

Question - My JD4600 (yr 2000) is having issues with the starter (I believe). It is intermittent in the cold weather but didn稚 happen when it was warm outside this fall. I replaced the battery as it had hit 5 years and checked all the connections, so I don稚 believe the battery is the issue...

My JD665 Rotary Tiller’s rear Jack stand got bent last evening when I went to put it away. :( Not the stand portion, but the plate that attaches to the tiller. The plate must be soft metal, unfortunately. Does JD make a replacement attachment for this or should I attempt to bend it back...

I am looking at buying one of these units for my JD 4600 to be used on my PVC (Gardner Fence) Horse fence that I have on my property. Does anyone have any experience with these units and will they work reasonably with the PVC fence, etc? Any help would be appreciated. Thanks! -Bob

My new (old) 1951 JD B's temperature gauge isn't showing any temperature - even after 2 hours of spreading manure. The unit doesn't seem hot and the blinds arn't too hot with the air. However, if the gauge isn't showing anything, should I be thinking the gauge and sensor are bad and they...

Hello - My JD4600's hour meter (in the instrument cluster) started losing it's display the other night and now it is no longer there. I've talked to the dealer and he said to check the wiring behind it (has anyone ever taken the cowling off to get to it?) or bring it in. I'm curious if anyone...

Hello! I just acquired a John Deere B (family heirloom) that has been restored and kept up-to-date. After transferring it home, we did maintenance checks (oil, filter, etc.) and found that the battery doesn't seem to be working very well. The battery is a 5V unit and there was question that...

I'm purchasing a Tiller for my JD4600 - is it advisable to always get one larger than the wheel base, or is it ok to be just a bit shorter? I'm excited to get this as it will make my efforts in our very large garden much easier overall - especially with all of the manure being mixed in...

Hello there! I am in the market for a good arena rake tool for my horse arena/footing. JD used to sell the Riatta (RA1108, RA1110) under the Frontier brand, but now it seems that they have dropped it and you have to buy through Riatta. Any recommendations on Riatta and/or other rakes/arena...

:eek: I had a strange thing happen today with my 4600. I was getting ready to move some class 5 gravel and went to restart the unit and it wouldn't start. It clicked - which is consistent with a bad battery or poor connection (which is odd as the battery is new). So I opened it up, found...

I would put this in the dumb question category - but since I've not replaced many batteries in my tractors and have never had this happen, I figured I'd see if it was a common item or not. At the end of winter when it was still pretty cold I was noticing that my JD4600 wasn't always turning...

Hello - Just curious if anyone has thoughts on how long batteries are lasting through this year's cold temperatures (upper midwest / MN, for example). I have block and hydraulic heaters that I plug in, but I've notice that the engine starting is harder this year than past. I thought it might...

I'm looking at buying the JD 3-Pt Sprayer advertised on the JD website - John Deere products for homeowners: Features for Attachment 40-gal. 3-point Electric Sprayer - anyone have any experience with it (pro/con)? I will be using it to spray my horse pastures - the smaller unit that I have for...

Folks - I'm have a small 3-4 acre portion of my property that I'm looking to cut hay off for my horses. My options are to pay someone to do it - or look for equipment myself that would allow me to cut, rake, and bail in squares the hay (at least 2-3 cuttings a year). Given I've got Deere...

[no funnies here - I do not plan to stand behind the product :o ] Seriously though... I'm interested in some tips on using the unit. It is a Frontier MS1112 (PTO-driven) unit (pulled by a JD4600) and I already have it filled with horse manure (frozen - so I'm waiting to the warm temperatures...

Does Frontier make a Manure spreader and does anyone have any thoughts on them? (including price)? Thanks! -Bob

We recently acquired some horses (3) and I would like to obtain a manure spreader for use with my JD4600. Any suggestions on manufacturers, pricing, etc.? Thanks for the help! -Bob

Hello - I'm looking to install electric wiring with my 3-rail PVC around my horse corral. The fence manufacture, Gardner Fence, has supplied me with some pictures of fencing that has Electro Braid wire installed (see attached). I've purchased standard wire but like the looks of this...

My JD4600 (558 hours) had a Crankshaft Front Seal go bad and start leaking. I had it replaced at the JD dealer this week - part was cheap, labor was the most costly part of the repair (still reasonable considering what they had to do to replace it). The dealer said they hadn't seen this occur...

Anyone have one of these or seen one (it was in the latest issue of the JD Homestead magazine)? Do they really work and what is the cost being quoted? I'd love to have something to make the connections easier - the knuckle on the MX6 connection is a bear with the hoods in place over the rear...

Folks - This is my first year to do the checkup on the MX6 and I'm wondering how I should go about safely elevating the unit so I can check the blades, etc., under there. The manual shows putting it on Jackstands, but I don't think I'll be doing it that way.... :eek: Any thoughts and best...

This may seem like a strange question - but is there an expiration date on Hydraulic Fluid or Oil? I have another 100 hours to go on my JD4600 before my next changes, but my local dealer is having their annual sale and I'm thinking that it would be good to pickup my needed supply. I figure...

I have some questions concerning the brakes on my JD4600 HST. I recently hit the 500 hour mark and had the dealer do the maintenance for me (the stuff that said - SEE YOUR JOHN DEERE DEALER in the manual). All seemed to be have done right - and when it returned, I changed the filters and other...

(also posted in: http://www.tractorbynet.com/forums/jd-owning-operating/86522-500-hour-service-question-jd4600.html) I'm getting close to my 500 hour service interval on my 4600. There are two items that require me to take it into the JD Dealer for service - these are: - Fuel Injector...

I'm getting close to my 500 hour service interval on my 4600. There are two items that require me to take it into the JD Dealer for service - these are: - Fuel Injector Inspection - Engine Valve Clearance Adjustment I can understand the Fuel Injector inspection - but what is the Engine Valve...

I have a JD-ballast box that doesn't seem to be compatible with my i-Match unit. Anyone know if there is a conversion kit for the ballast box that allows it to work with the i-Match? Or are ballast boxes inherently non-compatible? I bought the box from the dealer several years ago and...

There is currently a discussion in another thread (http://www.tractorbynet.com/forums/showthread.php?p=936942#post936942) regarding the differences between bushings and sleeves when used on the 3-point pins - specifically where i-Matches connect to them. I am looking to understand the...

After many years of collaborating with other members of TBN to help me with my tractor issues/ideas/etc., I'm curious as to how the "member levels" are assigned. I'm just a lowly "gold" member, but I see others that are of various levels and I thought it would be interesting to know what those...

I recently purchased a 6ft rotary cutter and the PTO shaft was stuck. Eventually (after a bit of tapping), we got it loose and it now extends out to make the connection. However, it is still quite hard to extend back and forth. Is this normal? Or will time tell and hourly usage cause it to...

I've been making pretty good usage of car hauler/dollys for manuevering my tractor implements (Box Blade, Ballast Box, Forks, Bucket) around while attaching/detaching in my pole barn (concrete floor). However, I recently purchased a MX6 and have quickly realized that this unit is not as easy to...

I'd be curious to know what timezone it thinks I'm posting in as it seems to be off by 6+ hours from CST (where I live). If you're using GMT, then that makes sense - but it didn't work this way before. I like the new design - keep up the good work! -Bob

I got my MX6 this weekend and boy does it make short work of the waist high+ grass/etc. in my pasture. As I'm just starting to get used to it - and yet to dig into the thicker stuff, ditches, etc, I'm wondering if anyone has some tips regarding: - best way to cut with it? - hidden gotchas or...

I'm looking to purchase a mower that I can use to mow my pastures and ditches on my property. I've looked at the specs on both the LX6 and MX6 - it looks like I'd be better off with the MX6. Any thoughts on this? Also, what kind of pricing should I be expecting? Thanks for your help! -Bob

Folks - On my 4600, I sometimes use my alternate rear-wheel braking pedals to make better turns. I was doing some turning in the snow the other evening and noticed that the right rear wheel - the one that locks when I put on the parking brake was still spinning and not locking. But the left...

Just curious (as I'm going to replace the battery in my 4600) - what is the average battery life in these machines? I've had to trickle charge the battery a couple of times within the last year and the frequency of recharges has increased. I'm thinking this is due to the fact that the battery...

I'm looking to install PVC fencing on my property in the next month. I've been looking at different suppliers and some offer the straight PVC and another has treated lumber wrapped with PVC on it. Since I live in a cold climate (Minnesota), I'm just concerned that PVC might not hold up well...

I'm looking to purchase a PTO-driven PHD for my JD4600 very soon. I am going to use it to drill posts for my perimeter fence at my house. Fleet Farm and TSC both sell the Speeco brand of PHD. Any comments on durability, etc.? Thanks! -Bob

Hello - Having just purchased a set of rachet binders (much easier than the traditional ones that I've been using) for chaining up my 4600 on my 10K trailer, I was talking to a fellow at the Northern dealer who said that 1) the Minnesota DOT is now frowning on anyone using the traditional...

Ok folks... I have a running debate with my father-in-law who is looking at building two rock retaining walls (actually, they are boulders - 24-30" diameter) in his yard. He says we should use the forks on my tractor (JD4600 w/ 460FEL) and I say use the bucket since the rocks are small and the...

I've had a chance to visit the local TSC here in St. Paul, MN, and they seem to be sold pretty much on all First Choice equipment. In their catalog they list pretty much every 3-pt compatible piece I'd be interested in.... however, I'm also a JD person (meaning I like Green), and therefore...

Anyone know what this is? I'm looking for some additional lighting for my tractor so that when I'm working the loader, I still have light in front (the headlights are often blocked). JD shows "Forwarding Lighting Kit - 2 lights" (code: LVB25546) but I can't find any additional information on...

I posted a message concerning this in the JD Owning/Operating Forum - but I did not get a response. Anyone have any comments? Link Thanks! -Bob

Folks - I'm not at my hourly change point for the fluid in the MFWD (will be shortly though) - however, I'm wondering how to best verify fluid level and add if necessary. The way the plug w/stick works to verify fluid level isn't that good and I'm having a hard time reading the level (a screw...

Just curious (since I recently purchased a nice sprayer for use on my lawn and pasture) - what is the latest one can spray for weeds, etc.? We're starting to get some cool evenings here (40's) in central MN, but the days are still warm. I have been told that it is good to put down a coating...

I'm looking to get a Post Hole digger - PTO driven / 3-pt attachable - for my 4600. My local JD Dealer stocks the Greenline EM5000 post hole diggers from Green Manufacturing. I'm wondering what your thoughts are on these units? Also - what are common prices to compare? I noticed a nice...

Since I've always cut my grass with my FEL on (2 years), I've never experienced the differences in cutting and turning functionality that you get when you take the FEL and cut grass with only the mower on (I have a Buehler 72" finish pull-behind). Yesterday after visiting the dealer for some...

I'm looking at buying a Frontier Landscape rake - 1184 or 1196. Should I be looking at buying one larger than my wheelbase (I have a 4600)? Thanks! -Bob

I was at a Deere dealer researching armor kits and he mentioned the fact that there was going to be a new release of 4x30 CUT products coming out. Anyone else hear or know anything about this? -Bob

My local JD Dealer just had their annual "John Deere Days" event. It's a great way to see the new gear, talk to some reps, eat some free food, and get 15% discounts on parts, filters, oil, toys, clothing, etc. I'm stocked up now for my next set of changes! Do other dealers have these at...

Folks - I have a good friend in Virginia who is looking for a reputable dealer and reasonable pricing on: JD 4210 - HST - 60" Midmount Mower - Turf Tires He would also like to get a package price on a JD Loader/HD Bucket w/ replacement cutting edge to go along with the unit. Depending upon...

First comment - thanks for providing such a wonderful forum to discuss tractors! The new servers are really fast, too. Second comment - (minor) - the banner ad for the John Deere chair is getting errors when I try to invoke it. This seems to have happened after the server switchover. I know...

Has anyone purchased the "Rental Upgrade" accessory kit available for their 4000 JD CUT? I found it while browsing for a backup light for my 4600 and saw that this kit provided armor and electronics covers designed to protect the tractor from rental damage. I was curious if anyone had...

Hello! After posting to the JD board (I have a 4600), I thought that there might be some folks here who would have some insight... so, if you don't mind - http://www.tractorbynet.com/forums/showflat.php/Cat/0/Board/jdown/Number/358646/page/0/view/collapsed/sb/5/o/all/fpart/1 Thanks for your...

Hello - We finally got a good cold snap here in Minnesota (10 below zero+) and I neglected to plug in my heater(s) before I attempted to start the 4600. Needless to say the battery went from turning the motor over and coughing to a click-click... it's on the charger, should be fine, but I'm...

At our Lake cabin in MN, the water is so low now that I can drive into the lake and use my FEL to move the rocks near the shore up on to the shore line itself. The water level isn't over the top of the front wheels (4600 w/FEL), but I was wondering whether or not this would be a problem with...

Folks - Other than the dealer, does anyone know where I can download the pdfs of the Frontier manuals? I need another one for my BB1172 unit. Thanks! -Bob

This weekend while I was putting quite a few hours on my 4600/460FEL, I noticed that my bucket would stop uncurling (dump sequence) and it would require me to release and then re-engage the (hard right on the joystick) dump sequence. This didn't seem to be a problem all the time - but only when...

(This has been cross-posted to the JD forum also - thanks!) Does anyone have experience with Pallet Forks or Utillity Forks and what the true differences may be? I ordered my HD bucket (JD4600/460FEL) with the removable cutting edge today - at the same time I also ordered a set of pallet forks...

Does anyone have experience with Pallet Forks or Utillity Forks and what the true differences may be? I ordered my HD bucket with the removable cutting edge today - at the same time I also ordered a set of pallet forks (not JD - these were $595). The dealer mentioned that if I didn't need the...

Does anyone have an inkling on the pricing for Forks on a 460 FEL? I'm thinking of starting look around for pricing on this attachment for my 4600 (with a 460 FEL). If you have some information on where I can obtain pricing, please let me know. Thanks for your help! -Bob

Hello - Does anyone have any experience with the JD Backhoe attachment on a 4600 series tractor? I'm thinking about buying one and I'm wondering what would be required to attach it (additional hydraulics, etc.). I'm also wondering about cost, too. I guess I just can't have enough...

I'm picking up my 6' HD Frontier Box Blade unit this Saturday - since spring has finally made it to the Midwest I'm looking forward to getting a chance to use it on my acreage. That being said, I've seen many different posts on uses for box blades in TBN. I'm wondering if someone has a "Usage...

Thanks to those in the past that had emailed me with manufacturer information for where I could get this. I've searched here to find it - but perhaps I'm not searching for it right. If it wasn't for my change in laptops recently and losing some email archives, I'd still have it now that I'm...

Does First Choice, Buehler, or any of the Attachment/Implement manufacturers have on-line catalogs available for their products? Thanks for your help - -Bob

3-Pt Trailer Hitch Option for JD 4600\'s? Folks - Although my JD 4600 has a trailer bar that I can attach a Ball hitch to, I'm wondering if there is a 3-pt attachment that will allow me to connect/lift trailers with variable ball sizes (all the way up to 10K hitch balls). This would make...

Hello - Having looked over Box Blades and Tillers, I'm curious as to the general usage differences between the two. If I was to work a garden - leveling, simple tilling, etc., which would be more useful? A Box Blade or a Tiller? The Box Blade is cheaper - so therefore I'm wondering what...

Here's an interesting question for anyone owning a HST 4600 4WD - which transmission filter are you using? Currently I have a LVA10419 on my tractor - however, the part that I was sold at the dealership for my 4600HST4WD was a AM102723. I can't tell from the JDParts site whether the AM102723...

This may seem like an odd question but I've not had to address this before since most fluid or oil that I've bought has been bought in the measure format required (x # of quarts for example). My JD 4600 requires approx. 8.2 gallons of HST fluid when I do a transmission servicing - that being...

I've noticed some differences between the printed Operators Manual for my 4600 and the on-line version. I just did my 50 hour service on my tractor and in doing so, couldn't find one of the grease points identified in the manual (OMM135715-F8). I figured I'd search the JD on-line version and...

(I posted this as a response in another thread - however, because of the small window associated with the State Fair pricing, I wanted to make sure I was able to get feedback. Thanks!) ------------------- Hello - I'm currently looking at an 18' trailer that a local dealer in ND manufactures...

Living in MN, we're subject to quite a bit of extreme cold. According to some of the local farmers, it is a good idea to have an engine block heater installed. According to the manual, there is also a hydraulic heater available too. Anyone have any comments on these at all? Thanks! -Bob

Hello - Is there an Implement or Accessory Glossary (short of reading every brochure out there) that I can be pointed to where: - each implement/accessory is detailed - list of common uses, do's/don'ts, for each - where to purchase (name brand, 3rd party) - additional reviews/commentary There...

I've been looking at JD tractors at some of the local dealers here in MN. The local dealer near me has a 4600 on the lot that he needs to move - he'll price the tractor with a 460 loader/bucket and 72" finishing mower for $24K. The tractor has about 12 hours on it and would still carry the...