adjustment

I have a Long 5140 front end loader on my Long 360DTC tractor. The controls for the bucket are now no longer responding correctly (i.e., pushing left should tilt the bucket up but now drops the arms) and clearly need adjustment/repair. I have ordered the operator and parts manuals off eBay to...

Had the opportunity to use the chipper over the last couple of days. I took the advice from another post and loosened the springs on the feed roller. What a difference on feeding larger branches. Those things are way too tight as delivered from the factory.

Can some one give me an idea of what the average thickness of the shim between the worm gear assembly and the pedestal is on the power steering assembly for a two cylinder John Deere? I tried following the procedure in the power steering service manual but I just can't see how the thickness of...

I am finding the spring adjustment for my seats is frozen up. Frozen up as like welded up. Cannot get it to loosen up. This thing has some BIG heavy springs for the seat. I guess it has been like this from new. Finally realized the adjustment info in the manual is a joke. Nothing happens no...

I have a 6ft frontier brand disc harrow. I have seen other brands that have additional hardware that makes adjusting the gang angle easier. Has anyone modified theirs to make this task easier. Some sort of turn buckle would be nice but open to any suggestions.

Hi All, I have a Craftsman push mower with the engine mentioned above. I'm trying to adjust the valve lash, but when I look at various videos, they all show a set screw and nut to adjust, but the mower I have does not have the set screws. Anyone else find this with their engines? Thanks for...

The first of this month I made a post in the hydraulic forum concerning the slow curl action on my RK37. It takes right at 17 seconds for a full curl when the manual states 5.3 seconds. Long story short I swapped the connections of the curl/dump hoses and the FEL lift arms at the valve and the...

I recently acquired a 5105. The hand throttle is super stiff. My Branson's hand throttle has a tension adjustment under the instrument panel. Does the 5105 have something similar? Is it easy to get to?

My rural king tiller has a slipper clutch on it. Before using it i loosened it up and burnished the clutch surfaces. Tightened it back to where it was set and put a line on it with a paint pen. Tilling food plots today breaking fresh ground i hit some goobers. Enough to bog the tractor and make...

Hey guys, This year I noticed that my mower was moving around a little on my trailer and when I apply the brake on an incline it also moves. I started looking around and noticed that one of the cables is rather loose. As you can see I attempted to tighten it but it does not seem like it is...

I have my tractor in for that differential repair. The dealer suggested that the lifters should be adjusted, he said it should be done every 800 hours, I am at 1,450 hours, I don't know if the 800 hour adjustment was done, I bought it when it had 900 hours. His quote was really quite high, $800...

Does anyone know the clutch adjustments for a mahindra 2525? Just replaced drive and pto clutch plates and need to know clearances. Thanks

How do I prevent my mower from stop digging into the ground on turns? Are the skids supposed to be riding on the ground? I have an Ibex Flail TM62Y

A friend bought a 50" Landpride tiller at the Kubota dealer. We used it this weekend but I was not super impressed with the depth it was able to till to. We used a ripper to rip 3 4' wide by 40 foot long rows. We then added some Compost and went to tilling it seems like the tiller only tilled...

Is there a shipping bolt or something securing my seat in place when it comes from the manufacturer? I’ve pulled the lever and twisted the knobs but my seat just doesn’t slide forward and back or go up and down.

Hi all, new here looking for help. 60” MMM dive over. When I lose the deck the right side goes down about an inch or more before the left side moves . I tried adjusting the link and it changes somewhat but not enough. The manual says adjust upper link and under link. I can only find one...

I am looking for infomation on adjusting the shifter or rebuilding the linkage on my tractor. Please let me know if you have any insight on this. I have a Yanmar 1510D that runs well and works well but shifting is kind of a mystery. When its in gear it works great, I can shift up and down and...