bobcat ct335

I have a CT 335 with a 8TB back hoe. The backhoe just sits in my shop taking up room and has little use because I have a excavator. am going to put it for sale. The question I have is if you bought a CT335, did the backhoe attaching brackets come with it even though you did not buy the hoe...

As the title says, I have the CT335 (2010) which should be the DK35....long story short, need to split the tractor to get the oil pan removed (unless someone knows how to do that without splitting, I don't see a way), I'm at the propeller shaft and the instructions are very basic: 6.1.5...

How to remove/replace

my ct335 shut down just like i turned the key off, i have no dash lights except the glow plug light when key is turned to preheat. I get a click from the ignition switch relay and the glow plug relay ,but nothing else. and no start with key. it seems like a wiring problem or fuse but the fuses...

When the outside temp is above 50+ degrees, tractor starts fine. below that temp, it just spins no ignition. already changed glowplug relay. any suggestions?

Just a Kioti in another color so figure I'd try here in addition to the Bobcat forum: Time for a new game of stump the chump....me being the chump. First off, I've scanned quite a few threads around same topic, and none of those have helped to fix the issue. Summary: yesterday tractor worked...

Time for a new game of stump the chump....me being the chump. First off, I've scanned quite a few threads around same topic, and none of those have helped to fix the issue. Summary: yesterday tractor worked great, used for a few hours, went to crank up this morning....dash lights come on, glow...

Anyone have the instructions for installing the Bob Cat backhoe? There must be a easier way than what I am doing. If you have one what is your method? Seems like I seen a clip on u tube once but cannot find it now

I posted this in the Bobcat forum, but that's getting little traffic, hope hear gets a few more eyes, as I don't think it's Bobcat specific issue: OK folks...think the problem just got more expensive....turns out the issue is in the following: #7 Bearing was shredded, that in turn caused...

I have a CT335 with cab. On the rear cab at the top of the vertical supports there are two brackets. One on each side. What is the purpose of them. I also have the 8TB backhoe and on the seat post where it attaches, there are a couple of small attachment holes there and I have no idea what...

As is said, the hose broke, part # is 7188081, Bobcat online parts catalog says item not available. Is there a replacement part or new part #? I tried looking at Kioti but couldn't figure out the correct cross-reference. Any help is appreciated. JD

This thread caught my attention. Here is my story and "sticking to it". I just purchased a Botcat ct335 with a factory Bobcat backhoe. I purchased it from a dealer on Ebay. (not complaning or badmouthing him" who had purchased it from another dealer and couldnt sell it. It has 302 hours on it...

I Just purchased a CT335. 2012. It has some grill damage which I patched up and fixed most of it but I need the lower screen. Some one had cut a hole through the screen to hook up a battery charger and ran the cord through it plus it is bent up pretty good.This tractor is 8 years old. Bobcat...

I just purchased a Bobcat ct335. Has a few things wrong with it that I am trying to address. One is that the grill is damaged. I glued the plastic shroud back together with JB plastic weld and seems pretty strong. It has two grill screens in it. I pretty well have the top one straightened...

Have a ct335. I understand that there are 4 relays under the dash. How do you go about removing dash to get to them. From a little info. I have it says picture 290. I don't have a manual. My tach, or warning lights do not work. Fuse 3rd from bottom has no power feed to it. (Red wire, blue...

Any one own a Bobcat CT335 with a cab and backhoe. Hoe do you like it. What do you think it is worth? I am looking around for a medium size backhoe but I want one with a cab and heat and AC. (used of course) I made contact with a dealer who says he has one coming in. I haven't seen on in...

My 10-year old CT335 with 560 hours on it has developed a weird problem. I am losing power when engaging PTO-driven implements. History: ran out of fuel. Replaced fuel filter and had to bleed the fuel lines of air to get it running right. Hook up the finish mower and hit the grass only to...

Know the price and availability of parts before you buy. Example: cracked and broken clear plastic cover on instrument panel. OEM = $550 It is part of an "assembly" which includes the entire instrument panel, plastic cover, and screws. A simple branch falling and cracking the plastic cover will...

Hello and hopefully someone can give some advice to get this thing running again. A few weeks ago the tractor started showing signs of something wrong. It turned over but would not start but the problem was intermittent and only happened 3 times over a 2 week period. Now it never starts...

Hello - I'm new to the forum and hoping someone here can help. I just picked up a Bobcat CT335 without a FEL. Im finding that new units will run me close to what I paid for the entire machine. I believe it's already setup for one (controls and hydraulics are there). Any advice on finding...

I noticed that when I use the 4 wheel assist and turn the steering wheel sharp to the left or right the tractor bogs down and lunges forward is this normal, also having some electrical problems, no tach, hours, neutral, park light, and the 4 wheel assist light is dimly lit, when its not in 4...

I had a ripped o-ring and replaced it with a new one. It still leaks some so I must have the wrong size. I need some help finding a part number and dimensions for the correct o-ring. Thanks, Ray

Since my last fill up, the fuel gauge is at full, despite having about 12 hours of heavy use. The gauge was working fine before the fill up. My problem is getting access to the sensor connector to disconnect and troubleshoot. Removing the hood would give me complete access to the area, but I...

I changed the battery on my bobcat 335 and had to replace the battery ends due to corrosion a few months back, now the 4 wheel assist light stays on, lose RPM's when the parking brake is applied, no headlights and when you first turn the key on and wait for the glow plug light to go out nothing...

Folks, I was shoveling snow with my bucket and dropped a big chunk of ice on my hood and mashed it. I'm looking for a new hood and don't know if I can find a Bobcat hood. What else might Fit? Kioti, LS? Thanks, Ray

I know this is a Kioti forum but my Bobcat is just a white Kioti. Hopefully you can help. I have no power at all. Nothing works. No lights, etc. Battery is good & connected. No click when key is turned. All fuses are good. Bad switch relay? How do I check the relays? What else might it be...

No power at all. Nothing works. No lights, etc. Battery is good & connected. No click when key is turned. All fuses are good. Bad switch relay? How do I check the relays? What else might it be? Thanks, Ray

$155 sounds a bit steep for this filter. Has anyone had any luck finding a cheaper, compatible part number? thanks, D

I have a Bobcat CT335 HST with about 175 hours on it, and I noticed that there is a small oil leak from the right rear brake cam shaft. The service manual shows two o-rings sealing the shaft. Has anyone experienced a similar leak, and if so, was the repair able to be implemented without...

Hello all, I'm in the market for a 30-40HP tractor and stumbled upon a 2013 Bobcat CT335 with FEL, 63hrs on it, and a heated/cooled cab. I called the dealer it was bought from and the vouch for the maintenance of it( just did the 50hr service) and the owner being very meticulous in his care of...

Getting ready for winter repairs. Here is one that has lasted all year: Headlights (low or high), turn signals, horn, cruise control, and instrument panel lights to not work. Fuses are all okay and voltage is passing through the fuses. Hazard flasher does work. Taillights and brake lights work...

The wheel bolts and nuts on my CT335 have a bad habit of working loose despite my visual diligence. I lost one wheel bolt only to find my local dealer (60 miles away) want $22 for a single bolt. They would not tell me the OEM part number and suggested that I purchase a $123 repair manual. Can...

Local (60 miles away) Dealer wants $22 for a single wheel bolt for the rear wheel on a Bob cat CT335 compact tractor. I am attempting to find another source. Dealer will not tell me the part number and I would have to buy a $100 manual to find out. Can anyone help?

Hello, everyone. New member here. My dog ripped the owners manual of my CT335 (same as Kioti DK35SE) last week (thank god not the service manual). Does anyone have a PDF version for their Kioti DK35SE that could send to me? Thank you in advance. My email address is solex789@hotmail.com I'll...

Hello, everyone. New member here. My dog ripped the owners manual of my CT335 last week (thank god not the service manual). Does anyone have a PDF version that could send to me? Thank you in advance. My email address is solex789@hotmail.com I'll offer my PDF service manual in trade. Bob

I'm getting ready to perform the 100 Hr. service on my CT335. One task is to clean out the Spark Arrestor Muffler. My concern is that the clean out plug is right over the alternator, and to avoid any contaminants getting into the alternator, I plan to fashion a deflector from sheet metal to...

Up to now, I have used a regular open-end adjustable wrench for maintenance work on my CT335, but would like to get a set of the most needed metric 6pt sockets, especially for the larger hardware (loader mounting bracket bolts, wheel nuts and bolts) but I can't seem to find just what size bolts...

I just ran across a backhoe (bobcat 911) that was used on a 853 skidsteer, and was wondering if I could hook it up to my Bobcatct335 and be able to use it to dig up some stumps?

I have a CT335 that I'm actually quite happy with. However this winter we've had an extraordinary amount of snow and I'm finding the CT335 is having a hard time pushing it and lifting it to the full height of the snow piles. I've come across a CT450 for sale and I'm wondering if the extra hp as...

Has anyone purchased a Utility Tractor service manual from Bobcat?? If so, did it come enclosed in a three ring binder? I just received a CT335 service manual from Bobcat but no binder, just the pages, pre-punched for a three-ring binder!

Hello again! Life is full of surprises. I purchased my CT335 just a year ago, and though I didn't order this option, I just discovered that it has a mid-mount pto. See attached photos. The only things that are missing are the mid-mount pto engagement lever beneath the seat and the pto shaft...

While preparing to do a complete grease job on my CT335 (Bobcat performed the first one during the 50 hour service), I noticed that the steering components were different than that shown in my manual. The manual shows two hydraulic cylinders, one for the left wheel and the second for the right...

Last year I picked up a 1x16 plow off CL for $100 with the intent of trying my CT335 HST with a plow. The plow was made by the Independent Manufacturing Company of Noedesha, Kansas. It is spring trip, has the rockshaft adjustment on the hitch, and a coulter. There is a small crack in the...

I changed the hydraulic oil and filter, now the 3-point hitch will raise normally but take 5 minutes to lower. Fluid levels are perfect. Can anyone tell me where to look next? Thank you in advance for your response.

Option A: Used, under 100 hour, Bobcat CT335 tractor only. Great shape. Final price $13,500 NO LOADER!! I would use for 5 acre brush hog and maybe some finish mowing. Option B: New, Bobcat CT335 tractor WITH Loader. Final price $17,500. I would use as above, brush hog and finish mowing...

Greetings, Hoping someone can help or provide a contact number at Bobcat. I am designing a shed floor for storage of my CT335. Floor will be wood framing. I have factory front end loader and know total weight of unit. I wish to learn how total weight is shared by front and rear axle so I can...

A piece of a limb flipped up and broke off a Hydraulic quick connect fitting off my CT335 at the box where all the hoses connect to, also there is a piece about 3 inches long held on with allen screws that is cracked but not leaking yet, are these fittings pressed into the block from the...

I am no longer in the market for a tractor. Today a 2012 Bobcat CT335 was delivered to my door. I have been shopping for quite awhile for a tractor and today was delivery day! I spent a couple hours in the saddle and now I realize why this is such a great choice for a new tractor. The size is...

I still am not understanding this shuttle shift... Do you need to come to a stop before shifting from forward to reverse? I do come to a stop but have read that it's not necessary? True or not?

Ct335 107 hrs, FEL, 8TB backhoe, like new... Make me an offer! Send pm for pics.

Has anyone installed a 3rd function kit to the loader on their Bobcat tractor, hard lines from Bobcat. I have a JD 3520 but my dad neglected to take my advice about getting it installed when he ordered his new CT 335. If so how much was the kit and was it easy to install? :o

I've been reviewing the various posts on this site and appreciate your input, so I signed up to pose a question. I have been shopping for several months and like the Bobcat utility tractors and have been given a cash price for a CT335 with quick attach loader of $19,500 - last year's model...

Was wondering if anyone else has noticed the hydraulic level not reading on the dip stick...? I can pull the dip stick and it won't show a level, put it back in and pull it out and it's at the full mark?? What's the deal???

I know that this has been in many previous threads but a renewal of information may be useful now. Many have bemoaned the prices of Bobcat filters and rightly so. The only reason to charge $100 or more for a filter is greed. I have taken the time to check most all of the filter manufactures to...

I am in serious negiotions on a CT335 and it sounds like several of you have this model and are very happy with it. Yes I know they are stopping production of the CT335 but I like the extra size, the ease of adding attachments and the separate pedals fo the hydro-transmission for forward and...

Has anyone had an issue with the front axle pivot not taking grease? I greased mine, and it was difficult for it to take grease. Then after I did this, a few very hot days later, I noticed that there was a small puddle of what appeared to be oil just under the front axle pivot. I looked, and...

Hello guys, I was just wondering if I can get some opinions. I am very close to purchasing a CT335. The dealer called back and said they had a brand new 2010 CT335 with full warranty and would offer it to me for $750 less than the 2012 model I am currently looking at. My question is.....are...

Price check please. New CT335 Loader Cab with AC/Heat Chris

Hi, i have a ct335 bobcat tractor and was wondering if anyone else had this starting issue. After i let the glow plug light go off and turn the key to start , the tractor makes this clicking noise sometimes for 5 to 10 secs and then the starter engages and turns the motor over then it starts...

OK, need some help here. My CT335's MLS valve knob is stuck. I can not loosen it and I sure don't want to try and turn it any harder than I have as it will surely snap the shaft that goes into the case and then I have really big problems. The 3pt goes up and down, I just have no control over...

My local dealer told me this week that Bobcat was dropping the CT335 from their line up. I don't know whether to be sad, or happy that my tractor may become collectible as Bobcat's first discontinued tractor model.:D

Found the lifting limits on the 8tl loader Sunday. I had a 8.5' x 7.5' x 4 concrete slab that was pitching water into a recessed inside corner where the house and garage meet. During the last couple of heavy rains there was noticeable water and sand down in that corner of the basement. It was...

Well I have had to give up my dreams of a new tractor. Don't want to put off building a house over a tractor purchase. I have found a 2010 CT 335 with a bushhog and landscape rake with just over 50 hours for $15,200. Looks nice, don't know why he is selling it yet. I have not sat on a 335...

After reading alot of discussions about tiller sizing for tractors I decided to look into renting one to try for putting in the garden. Checked with a couple local dealers that rent tractors and equipment first, then stopped into a rental yard on a whim. The guy had a John Deere 665 tiller...

What is the going rate on CT335s these days? I am finally willing to accept a left-outside-over-the-winter model because apparently, the dealers got the machines at last year's pricing and also get a selling incentive to get rid of them now. I am looking for a 335, 8T loader, hydrostat, GP...

Hi, everyone, newbie here. I am getting pretty serious about getting a compact tractor and need some advice about what to get. The bottom line is that given the dealers in my area (central PA) and the promotions out there, I have narrowed my search down to one of these two models. I know that...

Hi folks, I'm just starting the task of adding a grapple to my ct335 and am working on plumbing...I'd prefer to NOT use a diverter valve and instead tie into the Power Beyond port on the loader valve (made by walvoil) but cannot find any info even on their website... all I need is to identify...

I have a ct335 hst had been moving some dirt for about two hours. Then when i hit forward pedal started to stall then hit reverse and same thing. So I turned it off and wouldn't restart for a few attempts then started and shut off instantly. Now it won't do anything. When I turn the key it...

Newly retired, bought second home, 42 acres at 8400'. Land is 1/2 flat, 1/2 hilly, fenced with a mix of buck&rail and smooth wire Must maintain 3/4 mile dirt road. Not running live stock, not farming (possible small group of fruit trees). Will be doing hardscape/landscape. Need to rough mow...

Hi all just called my dealer and checked prices on filters and oil. Here is what he told me Engine oil 15w-40 buy anywhere Bobcat filter $7.70. Hydrostatic filter $77.60 Hydraulic Filter $23.77 Hydrostatic fluid Bobcat $44.05 for 2.5 Gal jug and he said gear oil 80w-90 for front axle from...

I was asked in another thread to post some pictures of my CT335 with cab. I know when I was considering purchasing this tractor it was very hard to find any pictures of a CT335 with a cab. Having plowed snow and snow blowed it on a tractor without a cab I new I wanted a cab on the next tractor I...

When I purchased my CT335 with cab I thought I had researched everything about this model and asked the dealer all the right questions. I ordered the unit on the thought I might want to put a BobCat backhoe on it at some future time. So the dealer advised me that installing a detente in the rear...

Lets talk block heaters for the CT335. First off, where would the plug/harness be located on the CT335? I looked around, but don't see one. I guess they don't come equipped from the factory with one. I really need one (yes, even in TN where we had 5" of snow today :confused2:) as there have...

I am looking into buying a King Kutter tiller for my 335. I was wondering what size would be ideal? Would the 72" be to much since it is on the low end of the manufactures spec of 35-50 hp? I would like to get one large enough to cover my tracks. Does anyone have some info?

I received my new CT335 this week just as the temperature decided to drop down to -30C. The unit is equipped with, block heater, battery blanket and oil pan heater. I decided to try it out once the temp rose to -25c after being plugged in for several hours. It started no problem but I was...

One of my primary motivations for buying another tractor was increased manueverability. My other tractor is a 53 hp utility with a collar shift transmission, and it is a bear to use in any tight quarters. My new CT335 was delivered Wednesday with the HST transmission, 8TL loader with bob-tach...

Well, pulled the trigger today...after lots or searching and research decided this was the best one for me. Mainly came down to price and dealer (both location and attentiveness). CT335 8TL Bobtach Loader GP Tires Grille Guard $19,400 All should also know, that the pricing offerings out...

I am seriously considering purchasing a new ct335. The dealer quote today was 16,300 + cost of loading rear tires. The price seems real good, but the only thing that I am afraid of is not being able to move a heavy load when I hook onto one. Does anyone know if there is a published towing...

Has anyone gotten a quote on a CT335 with a cab? Wondering what they are selling for.

I've been looking at the CT335 with a cab and comparing to it similar size Kubota and trying to decide which one to purchase. I'll be using the tractor in the bush in the fall to get firewood (were things unexpectedly stick up out of the ground) and one of the things I noticed on the CT335 is...

Just got my new SST CT335. Used it a couple of hours each day for the last few days. 11 hours total on machine. MAN, this clutch takes a brute to push it!!!! Used a bunch of tractors in the past, but can NEVER remember a clutch being this stiff!! Is this a common issue that I neen to just...

I have narrowed my decision down to these two models. I just wanted some input. Any body using one? Give me your opinions.

I put 10 hrs on my CT335 SST and so far everything is going great (as one would expect with only 10 hrs). I have to say I am impressed with how well the tractor runs and performs. It has a ton of power and seems like it will do everything I will ever need. From what others have stated before...

I have requested a quote for the best price available to day on at CT335 from my local Bobcat Dealer. CT335 HST, Front Aux Kit, dual Rear Remotes, 8TL FEL w/Bob-Tach, 8TB B/H (supposed to come with 9" Bucket) and R-4 tires. The Build and Quote from Bobcats website said $33750. The local dealer...

My New Cat showed up today about 4:30 pm. I put it to work right away I got a 7 ft rear blade on it and i dressed up my quarter mile driveway right away. It ran and performrd perfect of course its to early to say to much i will post more as i use it and put hrs on it. I tried to post a cpl pics...

I was all set to get a Kubota "L" series when I happened upon the Bobcat line. I absolutely love all the features of the CT335, BUT I am wondering if I am making the proper decision. Here's why.....................My place is 15 acres with about a 50/50 split a lawn vs pasture. All of it is...

I have the option to buy a bobcat CT335 with FEL from a friend for 14000.00 the tractor has 200 hours on it. Is this a good deal? Also he will include a landscape rake which he paid 600 for.Thanks for any info

I'm new to posting on this site but not new to reading it. Everybodys two cents along with quite a bit of research and comparisons have led me to purchase my first tractor, a Bobcat CT335. It will be delivered on Thursday, I can't wait. Thanks for all the advise. I have 23 acres of mosly wooded...

Been reading a lot on this site and still can't decide which one should I buy... Using it only around the house moving dirt, logs and driveway. Any advise for newbie? I don't know anything about tractor but want to fix my backyard on my own. I got 4 acres with a lot of woods. How 'bout those...

Has anyone had a problem with a fuel tank leak on their Bobcat CUT, namely a CT335?:( Does anyone know what the proper oil filter number is for a CT335. Went to do my 50 hour service and found out my dealer sold me the wrong filter. If there is an aftermarket filter available such as Wix or Fram...

Hi all. I've been reading all the posts on here for a few days and decided to jump in. I am in the market for a new tractor and actually started out thinking MF 2605 or NHTT45 when I began to read the Bobcat forum. I got a price of $15400 for a stripped down 2wd 2605 w/ FEL and $15200 for the...

Oh yes, happy joy, wahooo! Words alone cannot adequately describe the feeling you have when your first brand new tractor arrives. The anticipation, the telephone calls, the laying in bed reading the brochure. Then the day is upon you. The clock ticks, a car comes down the road, could it be? The...

What is the difference in these two tractors? Is it worth more money for the CT335? Thanks guys.

Hi Guys, I am interested in the Bobcat CT335, was quoted $15,200 cash with free loader (Bobtach). Has anyone done better than this in price in the tristate area. I don't mind traveling to pick up.

I have really had my eye on a new Kioti DK35seHST with FEL for $17k. Now I read on TBN that Bobcat CT335 is the same (or at least very similar) machine. After looking it seems to me that the Bobcat CT335 is closer to the Kioti CK model than it is to the Kioti DK model. Then again yesterday I ran...