branson 2400h

2 things, is this fluid ok for this unit? I use it in Kubota G1800. Also I think the 3 point arms are backwards. Just ordered bonded dowty washers to fix leaky 3rd function valve.

I know it's not a TYM but same engine 1.2 l A1100N2 Kukje. 2021 2400H Known as a good motor but this is what mine is doing at 395hrs. Saw one video of a guy that said injector timing was off and heater was never working? Had to do a "Top End" service. This white smoke at start up is concerning...

Howdy- new member here. I have a 2400h I bought used and partially disassembled so was unable to drive before buying. Tractor had tore up ring and pinion in rear end. Tore it all apart and replaced ring and pinion. Problem is reverse seems to work ok but having issues going fwd.. There is no...

Does your 2400h go the same speed in reverse as it does forward?

Hi all I just bought a 2016 Branson 2400h 4x4 with the sl00 fel and an MK Martin 60 inch blower. The lady I bought it from didn't post a price in the ad so when I inquired and she said $6k (CDN) I bought it. 324 hours on it. The only thing wrong with it is the rear hydraulic lift arms don't...

I have a Branson 2400H with about 650 hours on it. I was having fuel issues, air in the system. Got that fixed, then while running it just shut down and would start back up. I thought there was still some air in the system. I tried bleeding it, but no fuel was coming out. I heard the fuel...

I had to change the FEL hoses out on my 2400H and lost some hydraulic oil, Where do you fill the hyd oil at? I see where you put the engine oil at and there are two more places that has oil caps, one on the right front side and one behind the seat, what are these for? There is only one place to...

Good afternoon all, My 2018 2400h comes with a single air filter and I was wondering if anyone has or knows of a way I could get a double filter with an outer and inner or a secondary filter set up , Reason for my asking is because I am working in a very dusty environment on my property, the...

After 100 hours my tractor would not start. I completed the electrical checks and determined that my starter solenoid needs replacing. However, I'm being told that the complete starter assembly needs to be replaced for $475 plus shipping. Part number EA0003037C The question is. do you...

Found a local dealer selling a 2018 Branson 2400H with FEL. 110 hours on it for $10,895. A new 2020 from the same dealer is $14,500. Thoughts?

Hello, I'm getting ready to do a HST/Hydraulic filter & fluid change on my Branson 2400h and was wondering if there are good quality suitable "after market" fluids available? The following is an excerpt from the Service Manual (00 series - Chassis) found on this site, thank you to whoever...

Hi all, I recently acquired a 2014 Branson 2400h with FEL. It has 245 hours showing on the hour meter and because of the lack of service history information from the previous owner I want to update oils/filters. I'm hoping someone can help me find parts suppliers that are located in Western...

Hello Welcome Forum, Just hit 50 hrs. on my new last years (2017) model Branson 2400h. Looking for information about fluids filters and so forth and found this TractorbyNet web site. Looks like a good source of information so decided I would join. My little tractor has a backhoe, a...

Has anyone tired to Get the oil filter off for the first 50 hr oil change ? Branson 2400h There is barley any room to Get any type of wrench on IT .Mine is so tight I broke my oil filter wrench , today I bought 3 different type of oil filter wrenches to try , a strap wrench , a 3 finger wrench...

My Branson2400 TLB w/cab didn’t ome with stock step for the cab so I built one , at 62 and with a tired and beat up body after climbing in and out of the cab many times in a day IT gets to be a bear . I have read a few posts on steps which was very helpful. I got 2 pieces of conveyor belt that...

Hello all. About to purchase a machine for light duty work on 3 acres of flat land. Looking for feedback and input. I'm down to these two although I'm considering a Kubota l2501 but I'm creeping out of my price range with this unit. No convincing that the Kubota is superior and established...

Hello everyone. Like many others, I've found myself in the position of needing a tractor. I have turned to this forum and found a ton of useful info; however, I do still have a question. Before I get to that, let me give you a little information about my situation. My wife and I recently...

Which deal should I go with below, both asking $12,900? Is price good / bad? Any other thoughts? Bobcat CT235 compact tractor loader with under 900 hours 2015 Branson 2400h with 38 hours

Cross posted in the customization forum, but wanted them here in the brand forum too. (admin please remove if not allowed) Made some Debris forks that are 1.5", 1/4" wall, and fairly well sized for this 2400h Branson. Work great so far. Rear guard isn't 100% done, going to add expanded metal...

Branson 2400h vs Kubota BX2670 vs Kubota B series I can get both tractors for about the same price. My wife is pulling for the 'bota since it seems anyone you talk to recommends them. Might have to do with the number of jobs they provide here in GA. I can get the BX with 0% financing so that...

Been doing a lot of research - looking to buy a tractor in the next 6 months. I have narrowed my choices down to the following tractors - Branson 2400H, Kioti CK2510 or a JS XJ2025H. Going to be using the FEL and will probably add a 4' brush hog in the future. I'd love to hear from guys in...

We recently got a new Branson 2400H tractor to work around my mother's blueberry patches. she has about 5 acres of blueberries. Since she is 78 years old she has a little difficulty getting around. When we talked with the dealer about putting a step on the tractor to assist her, he came up with...

Hi all, I'm looking to purchase my first tractor and need some input on what everyone thinks would be the better choice. The first one is a 2005 Kubota BX2230 (bought new in 2006) with 265 hours that comes with FEL and 60" MMM. Original owner is selling it and it has been meticulously...

Pros and coins for each. Looking for opinions. Thanks.

Newbie here, I have been borrowing an older Kubota B7000 or an older 8n from neighbors here for the last few years, and it is finally time to bite the bullet and buy one. I am "blessed" to live near a larger city and have my choices made all the harder by the numerous options. Here is what I...